​
Bryan Obida

Live support:

Monday - Friday 6AM - 6PM PST

1SAM301901R1003 ABB Control Circuit Protection Accessories

ABB Control 1SAM301901R1003 ABB 1SAM301901R1003 is an auxiliary contact designed for right-side-mounting as a signaling contact/switch block with screw-clamp connections. It operates with a rated voltage of 600Vdc and is specifically designed for short-circuit alarm functions. This model features 2NC (Normally Closed) contacts and does not include Normally Open (NO) auxiliary contacts. It is suitable for use within an ambient air temperature range for operation of -25 to +60°C and for storage from -50 to +80°C. The part has an IP20 control voltage rating, a rated impulse voltage (Uimp) of 6 kV, and a rated insulation voltage (Ui) of 690 V. It is designed to withstand up to 50,000 operations, indicating its operational lifespan. The net dimensions include a width of 9 mm, a depth of 78 mm, and a length indicating operational cycles of 50,000 operations. This auxiliary contact is equipped for short circuit protection and phase failure, supporting a primary current of 690 V.
ABB Control

Part#:1SAM301901R1003

Manufacturer:ABB Control

Product Lifecycle:Active

Get a quick Quote!

ABB 1SAM301901R1003 is an auxiliary contact designed for right-side-mounting as a signaling contact/switch block with screw-clamp connections. It operates with a rated voltage of 600Vdc and is specifically designed for short-circuit alarm functions. This model features 2NC (Normally Closed) contacts and does not include Normally Open (NO) auxiliary contacts. It is suitable for use within an ambient air temperature range for operation of -25 to +60°C and for storage from -50 to +80°C. The part has an IP20 control voltage rating, a rated impulse voltage (Uimp) of 6 kV, and a rated insulation voltage (Ui) of 690 V. It is designed to withstand up to 50,000 operations, indicating its operational lifespan. The net dimensions include a width of 9 mm, a depth of 78 mm, and a length indicating operational cycles of 50,000 operations. This auxiliary contact is equipped for short circuit protection and phase failure, supporting a primary current of 690 V.

About the manufacturer: ABB Control is one of the manufacturers that offers Circuit Protection Accessories that you can order at marketplace.quotebeam.com. ABB's Industrial Automation division offers a variety of solutions designed for process and hybrid industries, including industry-specific integrated automation, electrification, and digital solutions, control technologies, software, and advanced services.

Check out the 1SAM301901R1003 ABB Control price in the box on the right side or send a quick quote.

Product condition

ORIGINAL PACKAGING

SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging

1SAM301901R1003 Description

ABB 1SAM301901R1003 is an auxiliary contact designed for right-side-mounting as a signaling contact/switch block with screw-clamp connections. It operates with a rated voltage of 600Vdc and is specifically designed for short-circuit alarm functions. This model features 2NC (Normally Closed) contacts and does not include Normally Open (NO) auxiliary contacts. It is suitable for use within an ambient air temperature range for operation of -25 to +60°C and for storage from -50 to +80°C. The part has an IP20 control voltage rating, a rated impulse voltage (Uimp) of 6 kV, and a rated insulation voltage (Ui) of 690 V. It is designed to withstand up to 50,000 operations, indicating its operational lifespan. The net dimensions include a width of 9 mm, a depth of 78 mm, and a length indicating operational cycles of 50,000 operations. This auxiliary contact is equipped for short circuit protection and phase failure, supporting a primary current of 690 V.

1-year warranty

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

By purchasing this item, you agree to the Terms & Conditions

Quotebeam is NOT an authorized distributor of ABB Control

Shipping and Delivery Worldwide

calculate costs and time

Secure Payment Processing

with money back guarantee

1 year warranty

on all parts

Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

ABB Control Disclaimer:

The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many ABB Control Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from ABB Control, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Relevant products

1SAM340000R1013 Part Image. Manufactured by ABB Control.

1SAM340000R1013

Verified stock: 0

ABB 1SAM340000R1013 is a protection unit designed with thermal-magnetic circuit breaker functionality for transformer primary protection. It features screw-clamp connections and offers an adjustable rated current of 16A to 20A. This unit is designed to operate within an ambient air temperature range of -25 to +70°C for operation and -50 to +80°C for storage. It supports a control voltage (DC) of IP20 and has a rated impulse voltage (Uimp) of 6 kV. The device measures 97.8 mm in net width, with poles extending 45 mm, and incorporates 3-poles (3P) for protection functions including short circuit protection, phase failure or loss, and transformer protection. The net depth is 690 V, and the control voltage (AC) stands at 86.55 mm. It is capable of mounting on DIN rails or mounting plates, with a primary current of 690 V and an operating mode designed for 50,000 operations. The unit features an ON/OFF/TRIP rotary knob for flow control, supports up to 100,000 operations in length, and offers thermal protection for overloads adjustable between 16A and 20A.

ABB Control

1SAM350005R1013 Part Image. Manufactured by ABB Control.

1SAM350005R1013

Verified stock: 0

ABB 1SAM350005R1013 is a Motor Protection Circuit Breaker (MPCB) designed for thermal-magnetic motor protection. It features manual motor starter protector functionality with screw-clamp connections. The rated current is adjustable between 16A and 20A, with specific ratings under UL/CSA for Full Load Amps (FLA) and Locked Rotor Amperes (LRA) across various voltages (200Vac, 208Vac, 220-240Vac, 440-480Vac, 550-600Vac). It includes Normally Open (NO) auxiliary contacts and is designed for a supply voltage (AC) of 550-600Vac. The MPCB offers a degree of protection with front-mounted auxiliary contact blocks (1NO+1NC) and operates within an ambient air temperature range of -25 to +70°C. It is equipped with a 3-pole (3P) configuration, rated insulation voltage (Ui) of 690V, and an IP20 protection rating. The device has a net width of 97.8mm, power consumption of 6kV, and is colored with a 45mm dimension. It supports a connection capacity of 7.5kW (400/415Vac) and is designed for a network frequency of 50Hz. The MPCB is capable of 50,000 operations, with a mechanical durability of 100,000 operations at no load. It features short circuit protection, phase failure/loss, and thermal overload Class 10 protection, with an operating rate that includes both thermal and magnetic (adjustable) protection mechanisms. The magnetic protection has a short-circuit pickup current fixed at 300A, while the thermal protection allows for an overload setting of 16A to 20A (adjustable). This part mounts on a DIN rail or mounting plate and is designed for use in environments with a climatic resistance of 100,000 operations.

ABB Control

Do you have questions?

We’re here for you ✨

We are a proud member of:

Association for High Technology Distribution LogoAssociation for Advancing Automation LogoThe International Society of Automation Logo