LTF12UC2LD Banner Optical Sensors
Part#:LTF12UC2LD
Manufacturer:Banner
Alt. Part#:94855
Product Lifecycle:Active
Get a quick Quote!
Laser Diffuse Time-of-Flight Sensor; Range: 50-12000 mm; Input: 12-30 V dc; Output: Analog: 0-10 V; Class 2 Laser; Discrete: NPN/PNP Configurable; 2 m (6.5 ft) Cable
About the manufacturer: Banner is one of the manufacturers that offers Optical Sensors that you can order at marketplace.quotebeam.com. Banner Engineering Corp. is a globally renowned leader in the industrial automation sector. Our diverse product line, comprising sensors, vision sensors, LED lights, indicators, wireless devices, and safety products, caters to businesses of all sizes worldwide.
Check out the LTF12UC2LD Banner price in the box on the right side or send a quick quote.
Product Details
- Weight503.48712 g
- Country Of OriginUS
- Profibus No
- Wireless No
- RS-232 No
- IO Link No
- Feature: Timing (Hold/Delay) Yes
- Feature: Remote Teach Yes
- Power/Current Consumption (exclusive of load) <85 mA @ 24 V (< 2.1 W)
- Supply Protection Circuitry Protected against reverse polarity and transient overvoltages
- Analog Linearity (mm) +/- 10
- Warm-up Time (minutes) 15
- RS-485 No
- SSI No
- 1-wire Serial Interface No
- RS-422 No
- Common Ethernet Protocol No
- PROFINET No
- Feature: Health/ Marginal Signal Output Yes
- Feature: Chemical Resistant No
- Typical Laser Lifetime (Hours) 60000
- Minimum Response Time (ms) 1.5
- Max Off-state Leakage Current (µA) PNP <10µA at 30V, NPN <200µa at 30V
- Alarm Output (mA) 100
- Max Ambient Light (Lux) 40000
- Laser Control Yes
- Minimum Window Size (mm) 10
- Discrete Output Hysteresis (mm) Automatically adjusted
- Spot Size (@ Reference Distance) 6.5 mm at 50 mm, 12.5 mm at 12000 mm
- Window Material Acrylic
- Max Operating Temperature (°C) 55
- Max Op. Relative Humidity Non-Condensing (%) 90 at 55°C
- NEMA Rating NEMA 6
- Storage Temperature (°C) -30 to 65
- Min Operating Temperature (°C) -20
- Output Protection Protected against continuous overload and short circuit
- IP Rating IP67
- Analog Voltage Output Rating 2.5 kΩ min. load impedance
- Discrete (Switched) Outputs 1 NPN/PNP Configurable
- Output Saturation Voltage PNP Outputs < 3V @ 100ma
- Max Discrete (Switched) Output (mA) 100
- Output Saturation Voltage NPN Outputs < 1.6V @ 100ma
- Vibration MIL-STD-202G req. Method 201A (vibration:10 to 60Hz max., double amplitude 0.06", max acc. 10G).
- Mechanical Shock IEC 60947-5-2 requirements: 30G 11 ms duration, half sine wave
- Number of Pins 5
- Temperature Effect (mm/°C) 0.25mm/C (typical)
- Sensing Beam Wavelength (nm) 660
- Adjustments Push Button; Remote Teach
- Delay at Power-up (ms) 2000
- Power Supply 12-30 V dc
- Minimum Sensing Distance (mm) 50
- Analog Resolution/Discrete Repeatability 1
- Input/Output Analog & Discrete
- Quick Disconnect Type No QD
- Max Sensing Distance (mm) 12000
- Analog Output Configuration 0-10 V dc
- Connection Flying Leads
- Laser Classification Class 2
- Indicator Display; LED(s)
- Primary Housing Material Zinc Alloy Die-Cast
- Sensing Mode (General) Proximity
- Sensing Mode (Detailed) Time of Flight
- PC Configurable No
- Housing Style Rectangular
- Cable Length (m) 2
- Power DC
- Device Type Sensor
- Max Measurement Range >1 m - <=20 m
- Sensing Beam Visible Red Laser
- Product series / family name L-GAGE series
- Display LCD 2 lines x 8 characters
- Wavelength 660 nm
- Analog outputs 1 x analog output (0-10Vdc)
- Order code / Manufacturer SKU 94855
- Primary brand Banner Engineering
- Supply voltage (DC) 12Vdc-30Vdc (24Vdc nom.)
- Digital outputs 1 x digital output (PNP/NPN transistor)
- Degree of protection IP67 NEMA 6
- Light Color Visible class 2 red Laser
- Compliant with standard(s) cULus CE
- Main function Sensor (Distance)
- Functions Class 2 Laser photo-electric distance sensor/transmitter green LED (power ON) yellow LED (analog output ON) yellow LED (discrete output ON) TEACH mode
- Sensing distance 5cm...12m
- Shape Rectangular
- Material Die-cast Zinc alloy housing Acrylic window
- Sub-range name LTF
- Design diffuse time-of-flight system
- Connection type Pre-wired with 6.5ft / 2m cable terminated with bare end flying leads
- Ambient air temperature for operation -20...+55 °C
- Protection functions Overload Short-circuit
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
LTF12UC2LD Description
Banner Engineering LTF12UC2LD is a Class 2 laser photo-electric distance sensor/transmitter from the LTF series, designed with a diffuse time-of-flight system and TEACH mode. It features a visible class 2 red laser with a wavelength of 660 nm. The sensor is housed in a rectangular, die-cast zinc alloy with an acrylic window. It is pre-wired with a 6.5ft / 2m cable terminated with bare end flying leads for connection. This sensor offers overload and short-circuit protection functions. It operates on a supply voltage of 12Vdc-30Vdc, with 24Vdc nominal. The LTF12UC2LD can operate in ambient air temperatures ranging from -20 to +55 °C and is rated with a degree of protection of IP67 NEMA 6. It provides 1 x analog output (0-10Vdc) and 1 x digital output (PNP/NPN transistor), with a sensing distance of 5cm to 12m.
Related documents LTF12UC2LD Specs
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Banner
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Banner Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Banner Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Banner, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
