QT50ULB-CRFV Banner Ultrasonic Sensors

Product Details

• Weight625.95696 g
• Country Of OriginUS
• Profibus
  No
• RS-422
  No
• Wireless
  No
• 1-wire Serial Interface
  No
• RS-485
  No
• SSI
  No
• RS-232
  No
• PROFINET
  No
• IO Link
  No
• Common Ethernet Protocol
  No
• Application: Ultrasonic
  Yes
• Feature: Chemical Resistant
  Yes
• Barrel Diameter (mm)
  56
• Feature: Timing (Hold/Delay)
  No
• Ultrasonic Frequency (kHz)
  75
• Power/Current Consumption (exclusive of load)
  100 mA max @ 10 V dc; 40 mA max @ 30 V dc
• Supply Protection Circuitry
  Protected against reverse polarity and transient overvoltages
• Feature: Clear Object Detection
  Yes
Feature: Remote Teach
Yes
Analog Linearity (mm)
+/- 0.2% of span from 200 to 8000 mm; +/- 0.1 % of span from 500 to 8000 mm (1 mm minimum)
Minimum Window Size (mm)
20
Rep Rate (ms)
96
Temp. Warm-up Drift (Notes 1)
After 5 min, the apparent switchpoint is < 0.6% of the actual position.
Minimum Response Time (ms)
100
Temp. Warm-up Drift (Notes 2)
After 25 min, the sensing position will be stable.
Temperature Warm-up Drift upon Power-up
< 7% of the sensing distance upon power-up.
Warm-up Time (minutes)
15
Max Op. Relative Humidity Non-Condensing (%)
100
Min Operating Temperature (°C)
-20
Max Operating Temperature (°C)
70
Storage Temperature (°C)
-40 to 90
NEMA Rating
NEMA 6P
IP Rating
IP67
Output Protection
Protected against short circuit conditions
Analog Voltage Output Rating
500 Ω min. load impedance
Analog Current Output Rating
1 kΩ or [(Vcc-5 V)/0.02 A] Ω, whichever is lower
Mechanical Shock
IEC 60947-5-2 requirements: 30G 11 ms duration, half sine wave
Vibration
MIL-STD-202F req. Method 201A (vibration:10 to 60Hz max., double amplitude 0.06", max acc. 10G).
Number of Pins
5
Delay at Power-up (ms)
1500
Temperature Effect (mm/°C)
Uncompensated: 0.2% of distance/°C; Compensated: 0.02% of distance/°C
Adjustments
Push Button (s)
Max Sensing Distance (mm)
6000
Power Supply
13-30 V dc
Minimum Sensing Distance (mm)
200
Analog Resolution/Discrete Repeatability
1
Analog Output Configuration
0-10 V dc or 4-20 mA
Indicator
LED(s)
Connection
Flying Leads
Quick Disconnect Type
No QD
Input/Output
Analog
Sensing Mode (Detailed)
Time of Flight
Housing Style
Rectangular
Primary Housing Material
PBT
Device Type
Sensor
PC Configurable
No
Power
DC
Sensing Mode (General)
Proximity
Cable Length (m)
2
Max Measurement Range
>1 m - <=20 m
Sensing Beam
Ultrasonic
Primary brand
Banner Engineering
Material
thermoplastic housing
Order code / Manufacturer SKU
74833
Product series / family name
U-GAGE series
Design
time-of-flight system
Sub-range name
QT50ULB series
Thread size
M30
Analog outputs
1 x analog output (0-10Vdc / 4-20mA)
Chemical resistance
chemical-resistant
Main function
Sensor (Distance)
Sensing distance
20cm...6m
Shape
Rectangular
Mounting mode
Threaded mount
Emission frequency
75kHz
Functions
Ultrasonic distance sensor/transmitter green LED (power ON) amber LED (output state) red LED (signal)
Supply voltage (DC)
13Vdc-30Vdc (24Vdc nom.)
Connection type
Pre-wired with 6.5ft / 2m cable terminated with bare end flying leads
Ambient air temperature for operation
-20...+70 °C
Compliant with standard(s)
CE
Degree of protection
IP67 NEMA 6P
Protection functions
Short-circuit
Equivalent to
QT50ULBCRFV

Related documents QT50ULB-CRFV Specs