Bryan Obida

Live support:

Monday - Friday 6AM - 6PM PST

4080493 Festo Electrical Peripheral Devices

Festo 4080493 analogue input module CPX-E-4AI-U-I Dimensions W x L x H: 18,9 mm x 76,6 mm x 124,3 mm, Grid dimension: 18,9 mm, No. of inputs: 4, Diagnostics via LED: (* Error per channel, * Error per module), Diagnostics via bus: (* Wire break, * Short circuit/overload
Festo

Part#:4080493

Manufacturer:Festo

Alt. Part#:CPX-E-4AI-U-I

Product Lifecycle:Active

Get a quick Quote!

analogue input module CPX-E-4AI-U-I Dimensions W x L x H: 18,9 mm x 76,6 mm x 124,3 mm, Grid dimension: 18,9 mm, No. of inputs: 4, Diagnostics via LED: (* Error per channel, * Error per module), Diagnostics via bus: (* Wire break, * Short circuit/overload

About the manufacturer: Festo is one of the manufacturers that offers Electrical Peripheral Devices that you can order at marketplace.quotebeam.com. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.

Check out the 4080493 Festo price in the box on the right side or send a quick quote.

Product Details

  • Note on ambient temperature
    -5 - 60 °C for vertical installation
  • Shock resistance
    Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
  • Electrical connection input, connection type
    4x terminal strip
  • Electrical connection input 2, function
    Functional ground
  • Electrical connection, input 2, number of pins/wires
    4
  • Electrical connection for input, conductor cross section
    0.2 mm² ... 1.5 mm²
  • Fuse protection (short circuit)
    Internal electronic fuse per module
  • Max. residual current of inputs per module
    1.4 A
  • Certificate issuing authority
    UL E239998
  • Max. address capacity inputs
    8 byte
  • Product weight
    96 g
  • Max. cable length
    30 m Shielded
  • Vibration resistance
    Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
  • Signal range
    -10 - 10 V 4 - 20 mA
  • Diagnostics via LED
    Faults per channel Faults per module
  • Electrical connection for input 2, information on conductor cross section
    0.2 - 2.5 mm² for flexible conductors without cable end sleeves
  • Electrical connection, input, number of pins/wires
    4
  • Measured variable
    Voltage Current
  • Basic error limit at 25°C
    ±0.2 %
  • Power failure buffering
    10 ms
  • Corrosion resistance class (CRC)
    0 - No corrosion stress
  • Data format
    15 bit + sign Linear scaling
  • Housing material
    PA
  • Electrical connection input, function
    Analog input
  • Permissible voltage fluctuations for electronics/sensors
    ± 25 %
  • Module parameters
    Parameterization error diagnostics Limit monitoring hysteresis
  • Electrical connection input 2, connection type
    Terminal strip
  • Electrical connection for input 2, connection pattern
    00995842
  • Operating error limit related to the ambient temperature range
    ±0.3 %
  • Electrical isolation between channel and internal bus
    yes
  • CE marking (see declaration of conformity)
    As per EU EMC directive
  • Relative air humidity
    95 % Non-condensing
  • Note on materials
    Contains paint-wetting impairment substances RoHS-compliant
  • Electrical connection for input, information on conductor cross section
    0.2 - 2.5 mm² for flexible conductors without cable end sleeves
  • Diagnostics via bus
    Wire break Lower limit value not complied with
  • KC characters
    KC EMC
  • Electrical input 2 connection, connection technology
    Spring-loaded terminal
  • Electrical connection for input 2, conductor cross section
    0.2 mm² ... 1.5 mm²
  • Repetition accuracy
    ±0.1 % at 25 °C
  • Electrical isolation between channels
    no
  • Storage temperature
    -20 °C ... 70 °C
  • Ambient temperature
    -5 °C ... 50 °C
  • Certification
    RCM compliance mark c UL us - Listed (OL)
  • Dimensions W x L x H
    18.9 mm x 76.6 mm x 124.3 mm
  • Intrinsic current consumption at nominal operating voltage for electronics/sensors
    Typically 70 mA
  • Electrical input connection, connection technology
    Spring-loaded terminal
  • Channel parameters
    Signal range per channel Lower/upper limit
  • Nominal operating voltage DC for electronics/sensors
    24 V
  • Width dimension
    18.9 mm
  • Type code
    CPX-E
  • No. of inputs
    4
  • Degree of protection
    IP20
  • Type of mounting
    With H-rail

Product condition

ORIGINAL PACKAGING

SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging



Related documents 4080493 Specs

1-year warranty

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

By purchasing this item, you agree to the Terms & Conditions

Quotebeam is NOT an authorized distributor of Festo

Shipping and Delivery Worldwide

calculate costs and time


Secure Payment Processing

with money back guarantee


1 year warranty

on all parts


Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

Festo Disclaimer:

The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Festo Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Festo, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Relevant products

Do you have questions?

We’re here for you ✨

We are a proud member of:

Association for High Technology Distribution LogoAssociation for Advancing Automation LogoThe International Society of Automation Logo