5242203 Festo Servo Motors
Part#:5242203
Manufacturer:Festo
Alt. Part#:EMMT-AS-60-S-HS-RMB
Product Lifecycle:Active
Get a quick Quote!
servo motor EMMT-AS-60-S-HS-RMB Ambient temperature: -15 - 40 °C, Note on ambient temperature: up to 80°C with derating -1.5%/°C, Max. installation height: 4000 m, Note on max. installation height: As of 1,000 m, only with derating of -1.0% per 100 m, Sto
About the manufacturer: Festo is one of the manufacturers that offers Servo Motors that you can order at marketplace.quotebeam.com. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.
Check out the 5242203 Festo price in the box on the right side or send a quick quote.
Product Details
- Peak current 5.4 A
- Detent torque < 1.0% of peak torque
- Shock resistance Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
- Motor type as per EN 60034-7 IM B5 IM V3
- Max. winding temperature 155 °C
- Brake coil inductivity 700 mH
- Max. mechanical speed 16000 1/min
- Brake closing time 10 ms
- Electric time constant 2.1 ms
- Rotor position encoder for DC operating voltage range 3.6 V ... 14 V
- Thermal time constant 41 min
- Rotor position sensor Absolute encoder, multi-turn
- Max. rotational speed 12500 1/min
- Rotor position sensor resolution 19 bit
- Note on degree of protection IP40 for motor shaft without rotary shaft seal IP67 for motor housing, incl. connection technology
- Balancing quality G 2.5
- Brake airflow 0.33 A
- Brake coil resistance 52.4 Ohm
- Number of pole pairs 5
- Max. brake friction work 5600 J
- Standstill torque constant 0.49 Nm/A
- Rotor position sensor measuring principle Inductive
- Brake power consumption 11 W
- Phase-phase winding resistance 11.7 Ohm
- Corrosion resistance class (CRC) 0 - No corrosion stress
- Brake mass moment of inertia 0.074 kgcm²
- Thermal class according to EN 60034-1 F
- Permissible axial shaft load 70 N
- Switching cycles, holding brake 10 million idle actuations (without friction work!)
- Conforms to standard IEC 60034
- Electrical connection for input 1, connection pattern 00995913
- Mounting position Any
- Measuring flange 250 x 250 x 15 mm, steel
- Vibration resistance Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
- Max. brake no-load speed 10000 1/min
- Brake stopping current 0.33 A
- Brake separation time ≤ 35 ms
- Winding longitudinal inductivity Ld (phase) 13 mH
- Rotor position encoder for absolutely detectable revolutions 4096
- Type code EMMT-AS
- Temperature monitoring Digital motor temperature transmission via EnDat® 2.2
- Continuous stall current 1.6 A
- Nominal operating voltage DC 565 V
- Motor nominal power 190 W
- Voltage constant, phase-to-phase 29.9 mVmin
- Relative air humidity 0 - 90 %
- Degree of protection IP40
- Total output inertia moment 0.257 kgcm²
- Peak torque 1.6 Nm
- MTTF, subcomponent 190 years, rotor position sensor
- Interface code, motor out 60P
- Electrical connection 1, connection technology M23x1
- Concentricity, coaxiality, axial runout according to DIN SPEC 42955 N
- Information on max. installation height with 1,000 m and longer only with derating of -1.0% per 100 m
- Note on ambient temperature Up to 80 °C with derating of -1.5% per degree Celsius
- Certificate issuing authority UL E342973
- Rotor position encoder for DC operating voltage 5 V
- Cross inductivity Lq (phase) 15.5 mH
- Rotor position encoder system accuracy angle measurement -120 arcsec ... 120 arcsec
- Rotor position sensor interface EnDat® 22
- Brake DC operating voltage 24 V
- Motor nominal current 1.4 A
- Winding inductance phase-phase 21 mH
- Storage temperature -20 °C ... 70 °C
- Ambient temperature -15 °C ... 40 °C
- Certification RCM compliance mark c UL us - Recognized (OL)
- Stall torque 0.66 Nm
- MTTFd, subcomponent 380 years, rotor position sensor
- Note on materials Contains paint-wetting impairment substances RoHS-compliant
- Electrical connection 1, connection type Hybrid plug
- Rotor position sensor for manufacturer designation EQI 1131
- Contamination level 2
- Electrical connection 1, number of pins/wires 15
- Max. installation height 4000 m
- Brake current consumption 0.46 A
- Storage lifetime, under nominal conditions 20000 h
- DC brake response delay ≤ 2 ms
- Thermal resistance 1.5 K/W
- Rotor position encoder for positional values per revolution 524288
- Nominal rotary speed 3000 1/min
- Motor constants 0.41 Nm/A
- Type of winding switch Star inside
- Rating class according to EN 60034-1 S1
- Brake holding torque 2.5 Nm
- Permissible radial shaft load 350 N
- CE marking (see declaration of conformity) As per EU EMC directive As per EU RoHS directive
- Nominal torque 0.6 Nm
- Product weight 1500 g
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
Related documents 5242203 Specs
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Festo
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Festo Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Festo Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Festo, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
