5340820 Festo Servo Amplifiers
Part#:5340820
Manufacturer:Festo
Alt. Part#:CMMT-AS-C4-3A-EC-S1
Product Lifecycle:Active
Get a quick Quote!
servo drive CMMT-AS-C4-3A-EC-S1 Mounting type: Mounting plate, bolted, Assembly position: (* Free convection, * Vertical), Product weight: 1400 g, Display: LED green/yellow/red, Control elements: Optional: control unit CDSB
About the manufacturer: Festo is one of the manufacturers that offers Servo Amplifiers that you can order at marketplace.quotebeam.com. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.
Check out the 5340820 Festo price in the box on the right side or send a quick quote.
Product Details
- Peak power 2000 VA
- Max. DC link voltage 395 V
- Fieldbus interface, transmission rate 100 Mbit/s
- Protection class I
- Synchronization interface, function Encoder emulation A/B/Z Encoder input A/B/Z
- Max. current of the floating switching outputs 50 mA
- Max. output current of holding brake 1 A
- Braking resistor nominal power (IEC) 23 W
- Based on norm EN 50581 EN 62061
- Controller operating mode Cascade control Autotuning
- Safety function Safe brake control (SBC) Safe stop 1 (SS1)
- Output voltage range AC 3x (0 – input) V
- Max. current of digital logic outputs 20 mA
- Encoder interface, function EnDat® 2.1 encoder SIN/COS encoder
- Ethernet interface, protocol TCP/IP
- Fieldbus interface, protocol EtherCAT
- Number of high-speed switching outputs 2
- Max. continuous output of the external braking resistor (IEC) 350 W
- System voltage to EN 61800-5-1 300 V
- Time resolution of high-speed switching outputs 1 µs
- Mode of operation Field-oriented regulation 1x SYNC interface for encoder emulation or encoder input
- Output frequency 0 Hz ... 599 Hz
- Hardware fault tolerance 1
- Max. peak current duration 2 s
- Nominal voltage, logic supply DC 24 V
- Nominal operating voltage phases 1-phase
- Surge resistance 6 kV
- Permissible voltage fluctuations -20 % / +15 %
- Degree of protection IP20
- Certification RCM compliance mark c UL us - Listed (OL)
- Number of digital logic inputs 12
- Operating range of analog inputs ± 10 V
- Encoder interface input, characteristics 1 MHz maximum output frequency max. 16384 ppr
- Mounting position Free convection Vertical
- Fieldbus interface, connection technology RJ45
- Encoder interface 2, function Incremental encoder SIN/COS encoder
- Number of inputs for motor temperature sensor 1
- Number of high-speed logic inputs 2
- Number of safe 2-pin inputs 2
- Max. installation height 2000 m
- Performance Level (PL) Safe brake control (SBC)/category 3, performance level e Safe torque off (STO)/category 4, performance level e
- Braking resistor, integrated 100 Ohm
- Impedance of setpoint input 70 kOhm
- Nominal operating voltage AC 230 V
- Nominal voltage, load supply DC 320 V
- Mains frequency 48 Hz ... 62 Hz
- Peak current per phase, effective 12 A
- Contamination level 2
- Certificate issuing authority German Technical Control Board (TÜV) Rheinland 01/205/5640.00/18 UL E331130
- UL-ambient temperature 0 °C ... 40 °C
- Communication profile CiA402 FoE (File over EtherCAT)
- Process interfacing I/O mode for 256 positioning blocks Interpolated mode CSV
- Characteristics of logic input Freely configurable in some cases Not galvanically isolated
- Type of mounting Mounting plate, screwed on
- Fieldbus interface, function Bus connection, incoming/forwarding EtherCAT® slave
- Information on max. installation height 1% power reduction/100 m above 1000 m.
- Ethernet interface, function Parameterization and commissioning
- Fieldbus interface, connection type 2x socket
- Number of diagnostic outputs 2
- Pulse energy for braking resistor 230 Ws
- Max. short circuit protection of mains 100 kA
- Max. current consumption for logic supply with parking brake 1.5 A
- Conforms to standard EN 61800-3 EN ISO 13849-1
- Safety integrity level (SIL) Safe brake control (SBC)/SIL 3/SILCL 3 Safe torque off (STO)/SIL 3/SILCL 3
- Braking resistor, external 67 Ohm ... 100 Ohm
- Diagnostic coverage 97 %
- Pulse power of braking resistor 1.6 kVA
- Controller nominal power 700 VA
- Nominal current per phase, effective 4 A
- Peak current, load supply 16.8 A
- Max. current consumption for logic supply without clamping brake 0.5 A
- CE marking (see declaration of conformity) As per EU EMC directive As per EU RoHS directive
- Relative air humidity 5 - 90 % Non-condensing
- Ambient temperature 0 °C ... 50 °C
- Work range of logic input -3 V ... 30 V
- Logic input specification Based on IEC 61131-2, type 3
- Switching logic at outputs PNP (positive switching)
- Note on materials Contains paint-wetting impairment substances RoHS-compliant
- Type code CMMT-AS
- KC characters KC EMC
- Mains types TT IT
- Overvoltage category III
- Number of floating switching outputs 1
- Max. voltage drop from logic supply to brake output 0.8 V
- Time resolution of high-speed logic inputs 1 µs
- Active PFC no
- Line filter Integrated
- Display LED green/yellow/red
- Control elements Optional: CDSB operating unit
- Characteristics of digital logic outputs Freely configurable in some cases Diagnostic outputs in some cases
- Max. length of motor cable without ext. mains filter 25 m
- Nominal current load supply 5.6 A
- Input voltage range AC 100 V ... 230 V
- SFF safe failure fraction 99 %
- Max. current consumption for logic supply with clamping brake and I/O 2.3 A
- Load supply permissible range -20 %/+15 %
- Storage temperature -25 °C ... 55 °C
- Product weight 1400 g
- Number of digital logic outputs 24 V DC 6
- Work range of setpoint input ± 10 V
- Characteristics of setpoint inputs Differential inputs Configurable for current/force
- Fieldbus coupling EtherCAT
- Permissible range of logic voltage ± 20 %
- Note on ambient temperature Above an ambient temperature of 40 °C, the power must be reduced by 3%/°C.
- Number of analog setpoint inputs 1
- Encoder interface output, characteristics 1 MHz maximum output frequency max. 16384 ppr
- Input switching logic PNP (positive switching)
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
Related documents 5340820 Specs
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Festo
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Festo Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Festo Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Festo, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨