Bryan Obida

Live support:

Monday - Friday 6AM - 6PM PST

8047635 Festo Quarter Turn Actuators

Festo 8047635 semi-rotary drive DFPD-40-RP-90-RS30-F04 single-acting, rack and pinion design, connection pattern to NAMUR VDI/VDE 3845 for mounting solenoid valves, position sensors and positioners, standard connection to fitting ISO 5211. Size of actuator: 40, Flange
Festo

Part#:8047635

Manufacturer:Festo

Alt. Part#:DFPD-40-RP-90-RS30-F04

Product Lifecycle:Active

Get a quick Quote!

semi-rotary drive DFPD-40-RP-90-RS30-F04 single-acting, rack and pinion design, connection pattern to NAMUR VDI/VDE 3845 for mounting solenoid valves, position sensors and positioners, standard connection to fitting ISO 5211. Size of actuator: 40, Flange

About the manufacturer: Festo is one of the manufacturers that offers Quarter Turn Actuators that you can order at marketplace.quotebeam.com. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.

Check out the 8047635 Festo price in the box on the right side or send a quick quote.

Product Details

  • Nominal operating pressure
    3 bar
  • Maritime classification
    See certificate
  • Swivel angle
    90 deg
  • Mode of operation
    Single-acting
  • Connection for valve positioner and position sensor conforms to standard
    VDI/VDE 3845 size AA 1
  • Explosive ambient temperature
    -20°C <= Ta <= +80°C
  • Explosion prevention and protection
    Zone 1 (ATEX) Zone 22 (ATEX)
  • Torque at nominal operating pressure and 0° swivel angle
    14 Nm
  • Spring return torque with 90° swivel angle
    13.6 Nm
  • Shaft connection
    T11
  • Note on materials
    RoHS-compliant
  • Material of screws
    High-alloy stainless steel
  • Devices type according to VDMA 66413
    Safety device
  • MTTFd
    1126 years
  • End-position adjusting range at 0°
    -5 deg ... 5 deg
  • Design
    Gear rack/pinion
  • Certified for safety function to ISO 13849 and IEC 61508 (SIL)
    Product can be used in safety-related parts of control systems up to SIL 2, low demand up to SIL 3 in a redundant architecture
  • Ambient temperature
    -20 °C ... 80 °C
  • Information on operating and pilot media
    Dew point min. 10 °C below the ambient and medium temperature Operation with oil lubrication possible (required for further use)
  • Torque at nominal operating pressure and 90° swivel angle
    7.3 Nm
  • PFD
    7.8E-4
  • Pneumatic connection
    G1/8
  • Housing material
    Wrought aluminum alloy, anodized
  • Operating pressure
    2 bar ... 8 bar
  • Flange hole pattern
    F04
  • Type code
    DFPD
  • Valve connection conforms to standard
    VDI/VDE 3845 (NAMUR)
  • Type of ignition protection for gas
    Ex h IIC T4 Gb X
  • Certificate issuing authority
    DNVGL TAP00001CE German Technical Control Board (TÜV) Rheinland 968/V 1106.00/19
  • Corrosion resistance class (CRC)
    2 - Moderate corrosion stress
  • Spring return torque at 0° swivel angle
    6.9 Nm
  • Material of spring
    Spring steel
  • Material of bearing
    POM
  • Size of valve actuator
    40
  • Safety function
    The fundamental safety function is that the control valve moves to the switching position when the compressed air is turned off. It is reset by spring force.
  • End-position adjusting range at nominal swivel angle
    -5 deg ... 5 deg
  • Standard connection for valve
    ISO 5211
  • Closing direction
    Clockwise closing
  • Safety integrity level (SIL)
    Up to SIL 2 low demand mode up to SIL 1 high demand mode
  • ATEX category for dust
    II 2D
  • Operating medium
    Compressed air as per ISO 8573-1:2010 [7:4:4]
  • Storage temperature
    -20 °C ... 60 °C
  • Product weight
    2087 g
  • Seals material
    NBR
  • Material of sub-base
    Wrought aluminum alloy, anodized
  • Cam material
    Cast stainless steel
  • PFH
    1.01E-7
  • Depth shaft connection
    12 mm
  • Mounting position
    Any
  • Symbol
    00991266
  • ATEX category gas
    II 2G
  • Type of (ignition) protection for dust
    Ex h IIIC T105°C Db X
  • CE marking (see declaration of conformity)
    as per EU explosion protection directive (ATEX)
  • Note about the torque
    The actuator's operating torque must not be higher than the maximum permissible torque listed in ISO 5211, based on the size of the mounting flange and the coupling.
  • Air consumption at 6 bar per cycle 0°-nominal swivel angle-0°
    1.5 l
  • Cover material
    Die-cast aluminum, coated
  • Material of piston
    Die-cast aluminum
  • Shaft material
    Steel, nickel-plated

Product condition

ORIGINAL PACKAGING

SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging



Related documents 8047635 Specs

1-year warranty

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

By purchasing this item, you agree to the Terms & Conditions

Quotebeam is NOT an authorized distributor of Festo

Shipping and Delivery Worldwide

calculate costs and time


Secure Payment Processing

with money back guarantee


1 year warranty

on all parts


Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

Festo Disclaimer:

The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Festo Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Festo, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Relevant products

Do you have questions?

We’re here for you ✨

We are a proud member of:

Association for High Technology Distribution LogoAssociation for Advancing Automation LogoThe International Society of Automation Logo