8048151 Festo Quarter Turn Actuators
Part#:8048151
Manufacturer:Festo
Alt. Part#:DFPD-480-RP-90-RS30-F1012-R3-EP
Product Lifecycle:Active
Get a quick Quote!
semi-rotary drive DFPD-480-RP-90-RS30-F1012-R3-EP single-acting, rack and pinion design, connection pattern to NAMUR VDI/VDE 3845 for mounting solenoid valves, position sensors and positioners, standard connection to process valve fitting ISO 5211, epoxy
About the manufacturer: Festo is one of the manufacturers that offers Quarter Turn Actuators that you can order at marketplace.quotebeam.com. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.
Check out the 8048151 Festo price in the box on the right side or send a quick quote.
Product Details
- Size of valve actuator 480
- Devices type according to VDMA 66413 Safety device
- PFH 1.01E-7
- Nominal operating pressure 3 bar
- Swivel angle 90 deg
- Standard connection for valve ISO 5211
- Symbol 00991266
- Certified for safety function to ISO 13849 and IEC 61508 (SIL) Product can be used in safety-related parts of control systems up to SIL 2, low demand up to SIL 3 in a redundant architecture
- Type of (ignition) protection for dust Ex h IIIC T105°C Db X
- Information on operating and pilot media Dew point min. 10 °C below the ambient and medium temperature Operation with oil lubrication possible (required for further use)
- Torque at nominal operating pressure and 0° swivel angle 173.5 Nm
- Spring return torque at 0° swivel angle 85 Nm
- Air consumption at 6 bar per cycle 0°-nominal swivel angle-0° 17.2 l
- Shaft connection T27
- Material of spring Spring steel
- Operating pressure 2 bar ... 8 bar
- MTTFd 1126 years
- Type code DFPD
- Mode of operation Single-acting
- Connection for valve positioner and position sensor conforms to standard VDI/VDE 3845 size AA 2
- Certificate issuing authority DNVGL TAP00001CE German Technical Control Board (TÜV) Rheinland 968/V 1106.00/19
- CE marking (see declaration of conformity) as per EU explosion protection directive (ATEX)
- Corrosion resistance class (CRC) 2 - Moderate corrosion stress
- Material of sub-base Wrought aluminum alloy, anodized
- Cover material Die-cast aluminum, coated
- Material of piston Die-cast aluminum
- Flange hole pattern F1012
- End-position adjusting range at nominal swivel angle -5 deg ... 5 deg
- Mounting position Any
- Closing direction Clockwise closing
- Valve connection conforms to standard VDI/VDE 3845 (NAMUR)
- ATEX category for dust II 2D
- Explosion prevention and protection Zone 1 (ATEX) Zone 22 (ATEX)
- Storage temperature -20 °C ... 60 °C
- PFD 7.8E-4
- Note on materials RoHS-compliant
- Housing material Wrought aluminum alloy, anodized
- Cam material Steel
- Material of screws High-alloy stainless steel
- Safety function The fundamental safety function is that the control valve moves to the switching position when the compressed air is turned off. It is reset by spring force.
- End-position adjusting range at 0° -5 deg ... 5 deg
- Design Gear rack/pinion
- Type of ignition protection for gas Ex h IIC T4 Gb X
- Explosive ambient temperature -20°C <= Ta <= +80°C
- Operating medium Compressed air as per ISO 8573-1:2010 [7:4:4]
- Note about the torque The actuator's operating torque must not be higher than the maximum permissible torque listed in ISO 5211, based on the size of the mounting flange and the coupling.
- Product weight 17261 g
- Pneumatic connection G1/4
- Seals material NBR
- Material of bearing POM
- Shaft material High-alloy stainless steel
- Maritime classification See certificate
- Depth shaft connection 29 mm
- Safety integrity level (SIL) Up to SIL 2 low demand mode up to SIL 1 high demand mode
- ATEX category gas II 2G
- Ambient temperature -20 °C ... 80 °C
- Torque at nominal operating pressure and 90° swivel angle 90.5 Nm
- Spring return torque with 90° swivel angle 168.1 Nm
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
Related documents 8048151 Specs
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Festo
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Festo Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Festo Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Festo, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
