8058461 Festo Flow Sensors

Product Details

• Pneumatic connection, outlet direction
  Straight
• Idle current
  ≤ 25 mA
• Note on materials
  RoHS-compliant
• Flow measuring range end value
  0.1 l/min
• Temperature of medium
  0 °C ... 50 °C
• Short-circuit protection
  yes
• Protocol
  IO-Link®
• IO-Link®, profile
  Smart sensor profile
• IO-Link®, process data content IN
  1 bit BDC (volume monitoring) 2 bit BDC (flow monitoring)
• IO-Link®, data memory required
  < 500 byte
• Pneumatic connection
  For pneumatic tubing outside diameter 4 mm
• Materials in contact with the media
  Wrought aluminum alloy, anodized High-alloy stainless steel
• Corrosion resistance class (CRC)
  2 - Moderate corrosion stress
• Electrical connection 1, number of pins/wires
  4
• Certification
  RCM compliance mark c UL us - Listed (OL)
• Flow direction
  Unidirectional
• Ambient temperature
  0 °C ... 50 °C
• Zero point repetition accuracy in ± %FS
  0.2 %FS
• Max. output current
  100 mA
• Flow characteristic curve, end value
  0.1 l/min
IO-Link®, function classes
Binary data channel (BDC) Teach channel
IO-Link®, port class
A
IO-Link®, minimum cycle time
4 ms
Product weight
60 g
Display type
Illuminated LCD, multi-color
Type code
SFAH
Electrical connection 1, connection technology
Connection diagram L1J
Symbol
00995795
Measured variable
Mass flow rate Volumetric flow rate
Operating pressure
-0.9 bar ... 10 bar
Nominal temperature
23 °C
Temperature co-efficient margin in ± %FS/K
typ. 0.15% FS/K
Switching element function
N/C contact/N/O contact switchable
Max. load resistance of current output
500 Ohm
IO-Link®, service data contents IN
32 bit volume/mass measurement
Type of mounting
With accessories
Displayable unit(s)
g scft/h
Protection class
III
Electrical connection 1, connection type
Plug
KC characters
KC EMC
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Measuring principle
Thermal
Flow measuring range start value
0.002 l/min
Accuracy of flow rate
± (2% o.m.v. + 1% FS)
Pressure influence of margin in ±%FS/bar
1 %FS/b.
Switching output
2 x PNP or 2 x NPN switchable
Flow characteristic curve, start value
0 l/min
Min. load resistance of voltage output
20 kOhm
Overload protection
Available
IO-Link®, communication mode
COM2 (38,4 kBd)
IO-Link®, process data width IN
3 Byte
Reverse polarity protection
for all electrical connections
Housing material
PA-reinforced
Setting options
IO-Link® Via display and pushbuttons
Protection against tampering
IO-Link® PIN code
Electrical connection for input 1, connection pattern
00995428
Certificate issuing authority
UL E322346
Method of measurement
Heat transfer
Operating medium
Argon Nitrogen
Repetition accuracy margin in ± %FS
0.8 %FS
Switching function
Window comparator Auto difference monitoring
Analog output
0 - 10 V 1 - 5 V
IO-Link®, protocol version
Device V 1.1
IO-Link®, SIO mode support
Yes
DC operating voltage range
22 V ... 26 V
Mounting position
Any
Degree of protection
IP40
Pressure drop
< 5 mbar

Related documents 8058461 Specs