8058462 Festo Flow Sensors

Product Details

• Pneumatic connection, outlet direction
  Straight
• KC characters
  KC EMC
• Idle current
  ≤ 25 mA
• CE marking (see declaration of conformity)
  As per EU EMC directive As per EU RoHS directive
• Certificate issuing authority
  UL E322346
• Operating medium
  Argon Nitrogen
• Ambient temperature
  0 °C ... 50 °C
• Repetition accuracy margin in ± %FS
  0.8 %FS
• Max. output current
  100 mA
• Flow characteristic curve, end value
  0.1 l/min
• Short-circuit protection
  yes
• IO-Link®, communication mode
  COM2 (38,4 kBd)
• IO-Link®, process data width IN
  3 Byte
• IO-Link®, data memory required
  < 500 byte
• Product weight
  60 g
• Displayable unit(s)
  g scft/h
• Protection against tampering
  IO-Link® PIN code
• Electrical connection 1, connection technology
  M8x1 A-coded as per EN 61076-2-104
• IO-Link®, port class
  A
• DC operating voltage range
  22 V ... 26 V
Mounting position
Any
Type of mounting
With accessories
Degree of protection
IP40
Certification
RCM compliance mark c UL us - Listed (OL)
Flow direction
Unidirectional
Method of measurement
Heat transfer
Measuring principle
Thermal
Nominal temperature
23 °C
Switching output
2 x PNP or 2 x NPN switchable
Analog output
0 - 10 V 1 - 5 V
Flow characteristic curve, start value
0 l/min
Protocol
IO-Link®
IO-Link®, function classes
Binary data channel (BDC) Teach channel
IO-Link®, process data content IN
1 bit BDC (volume monitoring) 2 bit BDC (flow monitoring)
IO-Link®, service data contents IN
32 bit volume/mass measurement
Materials in contact with the media
Wrought aluminum alloy, anodized High-alloy stainless steel
Corrosion resistance class (CRC)
2 - Moderate corrosion stress
Electrical connection for input 1, connection pattern
00991171
Symbol
00995794
Note on materials
RoHS-compliant
Flow measuring range start value
0.002 l/min
Temperature of medium
0 °C ... 50 °C
Zero point repetition accuracy in ± %FS
0.2 %FS
Temperature co-efficient margin in ± %FS/K
typ. 0.15% FS/K
Switching element function
N/C contact/N/O contact switchable
Max. load resistance of current output
500 Ohm
Overload protection
Available
IO-Link®, protocol version
Device V 1.1
IO-Link®, minimum cycle time
4 ms
Pneumatic connection
For pneumatic tubing outside diameter 4 mm
Display type
Illuminated LCD, multi-color
Pressure drop
< 5 mbar
Type code
SFAH
Electrical connection 1, connection type
Plug
Electrical connection 1, number of pins/wires
4
Measured variable
Mass flow rate Volumetric flow rate
Flow measuring range end value
0.1 l/min
Operating pressure
-0.9 bar ... 10 bar
Accuracy of flow rate
± (2% o.m.v. + 1% FS)
Pressure influence of margin in ±%FS/bar
1 %FS/b.
Switching function
Window comparator Auto difference monitoring
Min. load resistance of voltage output
20 kOhm
IO-Link®, profile
Smart sensor profile
IO-Link®, SIO mode support
Yes
Reverse polarity protection
for all electrical connections
Housing material
PA-reinforced
Setting options
IO-Link® Via display and pushbuttons
Protection class
III

Related documents 8058462 Specs