8066437 Festo Quarter Turn Actuators
Part#:8066437
Manufacturer:Festo
Alt. Part#:DFPD-N-20-RP-90-RS60-F03-R3-EP
Product Lifecycle:Active
Get a quick Quote!
semi-rotary drive DFPD-N-20-RP-90-RS60-F03-R3-EP single-acting, rack and pinion design, connection pattern to NAMUR VDI/VDE 3845 for mounting solenoid valves, position sensors and positioners, standard connection to process valve fitting ISO 5211, NPT con
About the manufacturer: Festo is one of the manufacturers that offers Quarter Turn Actuators that you can order at marketplace.quotebeam.com. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.
Check out the 8066437 Festo price in the box on the right side or send a quick quote.
Product Details
- Safety function The fundamental safety function is that the control valve moves to the switching position when the compressed air is turned off. It is reset by spring force.
- PFH 1.01E-7
- Standard connection for valve ISO 5211
- Symbol 00991266
- Certified for safety function to ISO 13849 and IEC 61508 (SIL) Product can be used in safety-related parts of control systems up to SIL 2, low demand up to SIL 3 in a redundant architecture
- Type of (ignition) protection for dust Ex h IIIC T105°C Db X
- Corrosion resistance class (CRC) 2 - Moderate corrosion stress
- Note about the torque The actuator's operating torque must not be higher than the maximum permissible torque listed in ISO 5211, based on the size of the mounting flange and the coupling.
- Pneumatic connection 1/8 NPT
- Seals material NBR
- Cam material Cast stainless steel
- Size of valve actuator 20
- MTTFd 1126 years
- End-position adjusting range at 0° -5 deg ... 5 deg
- Mounting position Any
- Safety integrity level (SIL) Up to SIL 2 low demand mode up to SIL 1 high demand mode
- ATEX category for dust II 2D
- Certificate issuing authority DNVGL TAP00001CE German Technical Control Board (TÜV) Rheinland 968/V 1106.00/19
- Storage temperature -20 °C ... 60 °C
- Note on materials RoHS-compliant
- Housing material Wrought aluminum alloy, anodized
- Operating pressure 2 bar ... 8 bar
- Maritime classification See certificate
- End-position adjusting range at nominal swivel angle -5 deg ... 5 deg
- Type code DFPD
- Connection for valve positioner and position sensor conforms to standard VDI/VDE 3845 size AA 1
- Type of ignition protection for gas Ex h IIC T4 Gb X
- Explosion prevention and protection Zone 1 (ATEX) Zone 22 (ATEX)
- Torque at nominal operating pressure and 0° swivel angle 14.7 Nm
- Air consumption at 6 bar per cycle 0°-nominal swivel angle-0° 0.8 l
- Cover material Die-cast aluminum, coated
- Material of bearing POM
- Nominal operating pressure 6 bar
- Devices type according to VDMA 66413 Safety device
- Swivel angle 90 deg
- Mode of operation Single-acting
- Valve connection conforms to standard VDI/VDE 3845 (NAMUR)
- Explosive ambient temperature -20°C <= Ta <= +80°C
- Operating medium Compressed air as per ISO 8573-1:2010 [7:4:4]
- CE marking (see declaration of conformity) as per EU explosion protection directive (ATEX)
- Spring return torque at 0° swivel angle 7.2 Nm
- PFD 7.8E-4
- Shaft connection T9
- Material of spring Spring steel
- Material of piston Die-cast aluminum
- Shaft material High-alloy stainless steel
- Flange hole pattern F03
- Depth shaft connection 10 mm
- Design Gear rack/pinion
- Closing direction Clockwise closing
- ATEX category gas II 2G
- Ambient temperature -20 °C ... 80 °C
- Information on operating and pilot media Dew point min. 10 °C below the ambient and medium temperature Operation with oil lubrication possible (required for further use)
- Torque at nominal operating pressure and 90° swivel angle 7.6 Nm
- Spring return torque with 90° swivel angle 14.3 Nm
- Product weight 1419 g
- Material of sub-base Wrought aluminum alloy, anodized
- Material of screws High-alloy stainless steel
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
Related documents 8066437 Specs
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Festo
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Festo Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Festo Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Festo, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
