Bryan Obida

Live support:

Monday - Friday 6AM - 6PM PST

8068929 Festo Quarter Turn Actuators

Festo 8068929 semi-rotary drive DFPD-N-700-RP-90-RS60-F1012 single-acting, rack and pinion design, connection pattern to NAMUR VDI/VDE 3845 for mounting solenoid valves, position sensors and positioners, standard connection to process valve fitting ISO 5211, NPT contro
Festo

Part#:8068929

Manufacturer:Festo

Alt. Part#:DFPD-N-700-RP-90-RS60-F1012

Product Lifecycle:Active

Get a quick Quote!

semi-rotary drive DFPD-N-700-RP-90-RS60-F1012 single-acting, rack and pinion design, connection pattern to NAMUR VDI/VDE 3845 for mounting solenoid valves, position sensors and positioners, standard connection to process valve fitting ISO 5211, NPT contro

About the manufacturer: Festo is one of the manufacturers that offers Quarter Turn Actuators that you can order at marketplace.quotebeam.com. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.

Check out the 8068929 Festo price in the box on the right side or send a quick quote.

Product Details

  • Operating pressure
    2 bar ... 8 bar
  • Safety function
    The fundamental safety function is that the control valve moves to the switching position when the compressed air is turned off. It is reset by spring force.
  • MTTFd
    1126 years
  • Depth shaft connection
    29 mm
  • Type code
    DFPD
  • Symbol
    00991266
  • Type of ignition protection for gas
    Ex h IIC T4 Gb X
  • Explosion prevention and protection
    Zone 1 (ATEX) Zone 22 (ATEX)
  • Nominal operating pressure
    6 bar
  • Swivel angle
    90 deg
  • Flange hole pattern
    F1012
  • Mounting position
    Any
  • ATEX category gas
    II 2G
  • ATEX category for dust
    II 2D
  • Operating medium
    Compressed air as per ISO 8573-1:2010 [7:4:4]
  • Note about the torque
    The actuator's operating torque must not be higher than the maximum permissible torque listed in ISO 5211, based on the size of the mounting flange and the coupling.
  • Pneumatic connection
    1/4 NPT
  • Material of piston
    Die-cast aluminum
  • Devices type according to VDMA 66413
    Safety device
  • Maritime classification
    See certificate
  • Standard connection for valve
    ISO 5211
  • Closing direction
    Clockwise closing
  • Certified for safety function to ISO 13849 and IEC 61508 (SIL)
    Product can be used in safety-related parts of control systems up to SIL 2, low demand up to SIL 3 in a redundant architecture
  • Certificate issuing authority
    DNVGL TAP00001CE German Technical Control Board (TÜV) Rheinland 968/V 1106.00/19
  • Torque at nominal operating pressure and 0° swivel angle
    465.5 Nm
  • Storage temperature
    -20 °C ... 60 °C
  • Product weight
    26268 g
  • Cover material
    Die-cast aluminum, coated
  • Housing material
    Wrought aluminum alloy, anodized
  • Material of screws
    High-alloy stainless steel
  • Design
    Gear rack/pinion
  • Size of valve actuator
    700
  • PFH
    1.01E-7
  • End-position adjusting range at nominal swivel angle
    -5 deg ... 5 deg
  • Mode of operation
    Single-acting
  • Connection for valve positioner and position sensor conforms to standard
    VDI/VDE 3845 size AA 2
  • Safety integrity level (SIL)
    Up to SIL 2 low demand mode up to SIL 1 high demand mode
  • Explosive ambient temperature
    -20°C <= Ta <= +80°C
  • Corrosion resistance class (CRC)
    2 - Moderate corrosion stress
  • Air consumption at 6 bar per cycle 0°-nominal swivel angle-0°
    24.5 l
  • Material of spring
    Spring steel
  • Cam material
    Steel
  • End-position adjusting range at 0°
    -5 deg ... 5 deg
  • Valve connection conforms to standard
    VDI/VDE 3845 (NAMUR)
  • Type of (ignition) protection for dust
    Ex h IIIC T105°C Db X
  • Ambient temperature
    -20 °C ... 80 °C
  • CE marking (see declaration of conformity)
    as per EU explosion protection directive (ATEX)
  • PFD
    7.8E-4
  • Spring return torque with 90° swivel angle
    470.7 Nm
  • Seals material
    NBR
  • Shaft material
    Steel, nickel-plated
  • Information on operating and pilot media
    Dew point min. 10 °C below the ambient and medium temperature Operation with oil lubrication possible (required for further use)
  • Torque at nominal operating pressure and 90° swivel angle
    252.8 Nm
  • Spring return torque at 0° swivel angle
    258.1 Nm
  • Shaft connection
    T27
  • Material of sub-base
    Wrought aluminum alloy, anodized
  • Note on materials
    RoHS-compliant
  • Material of bearing
    POM

Product condition

ORIGINAL PACKAGING

SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging



Related documents 8068929 Specs

1-year warranty

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

By purchasing this item, you agree to the Terms & Conditions

Quotebeam is NOT an authorized distributor of Festo

Shipping and Delivery Worldwide

calculate costs and time


Secure Payment Processing

with money back guarantee


1 year warranty

on all parts


Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

Festo Disclaimer:

The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Festo Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Festo, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Relevant products

Do you have questions?

We’re here for you ✨

We are a proud member of:

Association for High Technology Distribution LogoAssociation for Advancing Automation LogoThe International Society of Automation Logo