8102166 Festo Electric Actuators
Part#:8102166
Manufacturer:Festo
Alt. Part#:EPCE-TB-60-10-FL-MF-ST-M-H1-PLK-AA
Product Lifecycle:Active
Get a quick Quote!
electric cylinder unit EPCE-TB-60-10-FL-MF-ST-M-H1-PLK-AA Effective diameter of drive pinion: 10,18 mm, Size: 60, Stroke: 10 mm, Stroke reserve: 0 mm, Piston rod thread: M10x1,25
About the manufacturer: Festo is one of the manufacturers that offers Electric Actuators that you can order at marketplace.quotebeam.com. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.
Check out the 8102166 Festo price in the box on the right side or send a quick quote.
Product Details
- Max. cable length 15 m outputs 20 m for IO-Link® operation
- Ready status indication LED
- Logic interface, connection pattern 00992264
- Logic interface, connection technology M12x1, A-coded as per EN 61076-2-101
- Number of digital logic outputs 24 V DC 2
- Product weight 1442 g
- IO-Link®, process data width OUT 2 Byte
- IO-Link®, number of ports 1
- IO-Link®, data memory required 500 byte
- Size 60
- Piston rod thread M10x1.25
- Shock resistance Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
- Input switching logic PNP (positive switching)
- Switching logic at outputs PNP (positive switching)
- Power supply, connection technology M12x1, T-coded as per EN 61076-2-111
- Power supply, number of pins/wires 4
- Nominal current 5.3 A
- IO-Link®, SIO mode support Yes
- IO-Link®, protocol version Device V 1.1
- Toothed belt material Polychloroprene with glass fiber
- Feed constant 32 mm/U
- Mounting position Any
- Rotor position sensor measuring principle Magnetic
- Insulation protection class B
- Certification RCM compliance mark
- Max. torque Mz 1 Nm
- Basic weight with 0 mm stroke 1397 g
- Housing material Wrought aluminum alloy, anodized
- Display LED
- Characteristics of logic input Configurable Not galvanically isolated
- Logic interface, connection type Plug
- Max. current consumption 5300 mA
- IO-Link®, process data content IN 1 bit (state device) 1 bit (state out)
- IO-Link®, port class A
- IO-Link®, Connection technology Plug
- Toothed belt elongation 0.375 %
- Stroke 10 mm
- Piston rod end External thread
- Position sensing Motor encoder
- Rotor position sensor Absolute encoder, single-turn
- Duty cycle 100%
- Corrosion resistance class (CRC) 0 - No corrosion stress
- Degree of protection IP40
- Max. torque Mx 0 Nm
- Guide value for payload, horizontal 10 kg
- Additional weight per 10 mm stroke 45 g
- Type of mounting With through-hole With accessories
- Vibration resistance Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
- Parameterization interface IO-Link® User interface
- Note on ambient temperature Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
- Power supply, type of connection Plug
- Max. current of digital logic outputs 100 mA
- Number of digital logic inputs 2
- Work range of logic input 24 V
- Rotor position sensor resolution 16 bit
- IO-Link®, minimum cycle time 1 ms
- IO-Link®, process data content OUT 1 bit (move in) 1 bit (quit error)
- Maintenance interval Life-time lubrication
- Drive pinion effective diameter 10.18 mm
- Type code EPCE
- Homing Fixed stop block positive Fixed stop block, negative
- Max. speed 0.6 m/s
- Permissible voltage fluctuations +/- 15 %
- Relative air humidity 0 - 90 %
- Ambient temperature 0 °C ... 50 °C
- Guide value for payload, vertical 5 kg
- Reference value, running performance 100 km
- Note on materials Contains paint-wetting impairment substances RoHS-compliant
- KC characters KC EMC
- Logic input specification Based on IEC 61131-2, type 1
- Additional functions User interface Integrated end-position sensing
- Power supply, connection pattern 00995989
- Characteristics of digital logic outputs Configurable Not galvanically isolated
- DC nominal voltage 24 V
- Logic interface, number of poles/wires 8
- IO-Link®, service data contents IN 32 bit force 32 bit speed
- IO-Link®, process data width IN 2 Byte
- IO-Link®, communication mode COM3 (230.4 kBd)
- Protection class III
- Toothed belt pitch 2 mm
- Stroke reserve 0 mm
- Motor type Stepper motor
- Protection against torsion/guide With plain-bearing guide
- Repetition accuracy ±0.05 mm
- CE marking (see declaration of conformity) As per EU EMC directive As per EU RoHS directive
- Max. torque My 1 Nm
- Moving mass at 0 mm stroke 197 g
- Additional moving mass per 10 mm stroke 9.75 g
- Cover material Wrought aluminum alloy, anodized
- Design Electric actuator With integrated drive
- Symbol 00997342
- Max. acceleration 9 m/s²
- Storage temperature -20 °C ... 60 °C
- Impact energy in the end positions 0.016 J
- Max. feed force Fx 150 N
- Piston rod material High-alloy stainless steel
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
Related documents 8102166 Specs
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Festo
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Festo Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Festo Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Festo, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨