8118272 Festo Electric Actuators

Product Details

• Shock resistance
  Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
• Logic input specification
  Based on IEC 61131-2, type 1
• Additional functions
  User interface Integrated end-position sensing
• Display
  LED
• Ready status indication
  LED
• Logic interface, connection pattern
  00992264
• Work range of logic input
  24 V
• IO-Link®, port class
  A
• Parameterization interface
  IO-Link® User interface
• Number of digital logic outputs 24 V DC
  2
• KC characters
  KC EMC
• Vibration resistance
  Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
• Switching logic at outputs
  NPN (negative switching) PNP (positive switching)
• Max. cable length
  15 m outputs 20 m for IO-Link® operation
• Input switching logic
  NPN (negative switching) PNP (positive switching)
• Characteristics of logic input
  Configurable Not galvanically isolated
• Power supply, connection pattern
  00995989
• Note on ambient temperature
  Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
• Power supply, connection technology
  M12x1, T-coded as per EN 61076-2-111
• Logic interface, connection technology
  M12x1, A-coded as per EN 61076-2-101
DC nominal voltage
24 V
Power supply, number of pins/wires
4
Rotor position sensor resolution
16 bit
IO-Link®, process data width IN
2 Byte
IO-Link®, protocol version
Device V 1.1
Size
32
Screw diameter
8 mm
Type code
EPCS
Motor type
Stepper motor
Max. acceleration
5 m/s²
Corrosion resistance class (CRC)
0 - No corrosion stress
Max. torque My
1.5 Nm
Guide value for payload, vertical
9 kg
Characteristics of digital logic outputs
Configurable Not galvanically isolated
Max. current of digital logic outputs
100 mA
Max. current consumption
3000 mA
IO-Link®, SIO mode support
Yes
IO-Link®, minimum cycle time
1 ms
IO-Link®, communication mode
COM3 (230.4 kBd)
Stroke reserve
0 mm
Spindle pitch
8 mm/U
Piston rod end
External thread
Protection against torsion/guide
With plain-bearing guide
Max. speed
0.21 m/s
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Relative air humidity
0 - 90 % Non-condensing
Certification
RCM compliance mark
Max. torque Mz
1.5 Nm
Guide value for payload, horizontal
24 kg
Power supply, type of connection
Plug
Logic interface, connection type
Plug
Logic interface, number of poles/wires
8
Product weight
1058 g
IO-Link®, process data content IN
1 bit (state device) 1 bit (state out)
IO-Link®, process data width OUT
2 Byte
Stroke
100 mm
Max. angle of rotation of the piston rod +/-
1 deg
Symbol
00997294
Rotor position sensor measuring principle
Magnetic
Duty cycle
100%
Storage temperature
-20 °C ... 60 °C
Number of digital logic inputs
2
Nominal current
3 A
IO-Link®, service data contents IN
32 bit force 32 bit speed
IO-Link®, number of ports
1
IO-Link®, process data content OUT
1 bit (move in) 1 bit (quit error)
Reversing backlash
100 µm
Mounting position
Any
Spindle type
Ball screw drive
Rotor position sensor
Absolute encoder, single-turn
Repetition accuracy
±0.02 mm
Permissible voltage fluctuations
+/- 15 %
Ambient temperature
0 °C ... 50 °C
Additional weight per 10 mm stroke
24 g
IO-Link®, data memory required
500 byte
Piston rod thread
M8
Design
Electric actuator With integrated drive
Homing
Fixed stop block positive Reference switch
Insulation protection class
B
Degree of protection
IP40
Max. feed force Fx
150 N
Type of mounting
With internal thread With accessories
Max. torque Mx
0 Nm
Max. radial force on actuator shaft
75 N
Moving mass at 0 mm stroke
98 g
Piston rod material
High-alloy stainless steel
Basic weight with 0 mm stroke
818 g
Housing material
Wrought aluminum alloy, smooth-anodized
Additional moving mass per 10 mm stroke
3.3 g
Spindle nut material
Steel
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Spindle material
Roller bearing steel

Related documents 8118272 Specs