8118275 Festo Electric Actuators

Product Details

• Display
  LED
• Additional functions
  User interface Integrated end-position sensing
• Note on ambient temperature
  Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
• Vibration resistance
  Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
• Mounting position
  Any
• KC characters
  KC EMC
• Logic input specification
  Based on IEC 61131-2, type 1
• Characteristics of logic input
  Configurable Not galvanically isolated
• Power supply, connection technology
  M12x1, T-coded as per EN 61076-2-111
• Number of digital logic outputs 24 V DC
  2
• Max. current consumption
  3000 mA
• Nominal current
  3 A
• IO-Link®, minimum cycle time
  1 ms
• IO-Link®, process data width OUT
  2 Byte
• Size
  45
• Type code
  EPCS
• Protection against torsion/guide
  With plain-bearing guide
• Max. acceleration
  1.5 m/s²
• Repetition accuracy
  ±0.02 mm
• Storage temperature
  -20 °C ... 60 °C
Ambient temperature
0 °C ... 50 °C
Guide value for payload, horizontal
60 kg
Guide value for payload, vertical
23 kg
Additional moving mass per 10 mm stroke
4.9 g
Max. cable length
15 m outputs 20 m for IO-Link® operation
Ready status indication
LED
Switching logic at outputs
NPN (negative switching) PNP (positive switching)
Characteristics of digital logic outputs
Configurable Not galvanically isolated
Power supply, type of connection
Plug
Logic interface, connection type
Plug
Rotor position sensor resolution
16 bit
IO-Link®, port class
A
IO-Link®, communication mode
COM3 (230.4 kBd)
Stroke
50 mm
Design
Electric actuator With integrated drive
Rotor position sensor measuring principle
Magnetic
Insulation protection class
B
Corrosion resistance class (CRC)
0 - No corrosion stress
Degree of protection
IP40
Max. radial force on actuator shaft
180 N
Additional weight per 10 mm stroke
41 g
Piston rod material
High-alloy stainless steel
Shock resistance
Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
Input switching logic
NPN (negative switching) PNP (positive switching)
Logic interface, connection pattern
00992264
DC nominal voltage
24 V
Power supply, number of pins/wires
4
IO-Link®, process data content IN
1 bit (state device) 1 bit (state out)
IO-Link®, data memory required
500 byte
Reversing backlash
100 µm
Motor type
Stepper motor
Symbol
00997294
Duty cycle
100%
Certification
RCM compliance mark
Parameterization interface
IO-Link® User interface
Power supply, connection pattern
00995989
Max. current of digital logic outputs
100 mA
Number of digital logic inputs
2
Work range of logic input
24 V
IO-Link®, SIO mode support
Yes
IO-Link®, protocol version
Device V 1.1
IO-Link®, number of ports
1
Stroke reserve
0 mm
Spindle pitch
3 mm/U
Screw diameter
10 mm
Homing
Fixed stop block positive Reference switch
Max. speed
0.074 m/s
Permissible voltage fluctuations
+/- 15 %
Relative air humidity
0 - 90 % Non-condensing
Max. torque My
2.9 Nm
Logic interface, connection technology
M12x1, A-coded as per EN 61076-2-101
Logic interface, number of poles/wires
8
Product weight
1390 g
IO-Link®, service data contents IN
32 bit force 32 bit speed
IO-Link®, process data width IN
2 Byte
IO-Link®, process data content OUT
1 bit (move in) 1 bit (quit error)
Piston rod thread
M10x1.25
Max. angle of rotation of the piston rod +/-
1 deg
Piston rod end
External thread
Spindle type
Ball screw drive
Rotor position sensor
Absolute encoder, single-turn
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Max. torque Mx
0 Nm
Max. feed force Fx
450 N
Basic weight with 0 mm stroke
1185 g
Housing material
Wrought aluminum alloy, smooth-anodized
Spindle material
Roller bearing steel
Max. torque Mz
2.9 Nm
Type of mounting
With internal thread With accessories
Spindle nut material
Steel
Moving mass at 0 mm stroke
179 g
Note on materials
Contains paint-wetting impairment substances RoHS-compliant

Related documents 8118275 Specs