8118279 Festo Electric Actuators

Product Details

• Logic interface, connection technology
  M12x1, A-coded as per EN 61076-2-101
• Power supply, number of pins/wires
  4
• IO-Link®, service data contents IN
  32 bit force 32 bit speed
• IO-Link®, port class
  A
• IO-Link®, process data content OUT
  1 bit (move in) 1 bit (quit error)
• Size
  45
• KC characters
  KC EMC
• Display
  LED
• Ready status indication
  LED
• Logic interface, connection pattern
  00992264
• Logic interface, connection type
  Plug
• Logic interface, number of poles/wires
  8
• Product weight
  2210 g
• IO-Link®, process data width OUT
  2 Byte
• IO-Link®, communication mode
  COM3 (230.4 kBd)
• Stroke reserve
  0 mm
• Max. angle of rotation of the piston rod +/-
  1 deg
• Piston rod end
  External thread
• Rotor position sensor
  Absolute encoder, single-turn
• Max. speed
  0.074 m/s
Relative air humidity
0 - 90 % Non-condensing
Max. torque Mz
2.9 Nm
Guide value for payload, vertical
23 kg
Shock resistance
Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
Vibration resistance
Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
Characteristics of logic input
Configurable Not galvanically isolated
Note on ambient temperature
Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
Characteristics of digital logic outputs
Configurable Not galvanically isolated
Max. current of digital logic outputs
100 mA
Max. current consumption
3000 mA
Rotor position sensor resolution
16 bit
IO-Link®, process data content IN
1 bit (state device) 1 bit (state out)
IO-Link®, protocol version
Device V 1.1
IO-Link®, data memory required
500 byte
IO-Link®, number of ports
1
Spindle pitch
3 mm/U
Mounting position
Any
Spindle type
Ball screw drive
Repetition accuracy
±0.02 mm
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Max. torque My
2.9 Nm
Max. feed force Fx
450 N
Type of mounting
With internal thread With accessories
Spindle material
Roller bearing steel
Max. cable length
15 m outputs 20 m for IO-Link® operation
Input switching logic
NPN (negative switching) PNP (positive switching)
Parameterization interface
IO-Link® User interface
Switching logic at outputs
NPN (negative switching) PNP (positive switching)
Power supply, type of connection
Plug
Number of digital logic inputs
2
Work range of logic input
24 V
IO-Link®, SIO mode support
Yes
IO-Link®, minimum cycle time
1 ms
Stroke
250 mm
Screw diameter
10 mm
Motor type
Stepper motor
Homing
Fixed stop block positive Reference switch
Duty cycle
100%
Corrosion resistance class (CRC)
0 - No corrosion stress
Certification
RCM compliance mark
Max. radial force on actuator shaft
180 N
Additional weight per 10 mm stroke
41 g
Piston rod material
High-alloy stainless steel
Logic input specification
Based on IEC 61131-2, type 1
Additional functions
User interface Integrated end-position sensing
Power supply, connection pattern
00995989
Power supply, connection technology
M12x1, T-coded as per EN 61076-2-111
DC nominal voltage
24 V
Number of digital logic outputs 24 V DC
2
Nominal current
3 A
IO-Link®, process data width IN
2 Byte
Piston rod thread
M10x1.25
Type code
EPCS
Design
Electric actuator With integrated drive
Protection against torsion/guide
With plain-bearing guide
Max. acceleration
1.5 m/s²
Permissible voltage fluctuations
+/- 15 %
Degree of protection
IP40
Max. torque Mx
0 Nm
Moving mass at 0 mm stroke
179 g
Basic weight with 0 mm stroke
1185 g
Reversing backlash
100 µm
Symbol
00997294
Rotor position sensor measuring principle
Magnetic
Insulation protection class
B
Storage temperature
-20 °C ... 60 °C
Ambient temperature
0 °C ... 50 °C
Guide value for payload, horizontal
60 kg
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Housing material
Wrought aluminum alloy, smooth-anodized
Additional moving mass per 10 mm stroke
4.9 g
Spindle nut material
Steel

Related documents 8118279 Specs