8118281 Festo Electric Actuators

Product Details

• Display
  LED
• Additional functions
  User interface Integrated end-position sensing
• Shock resistance
  Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
• Input switching logic
  NPN (negative switching) PNP (positive switching)
• Logic interface, connection pattern
  00992264
• Max. cable length
  15 m outputs 20 m for IO-Link® operation
• Logic input specification
  Based on IEC 61131-2, type 1
• Switching logic at outputs
  NPN (negative switching) PNP (positive switching)
• Characteristics of digital logic outputs
  Configurable Not galvanically isolated
• Logic interface, connection technology
  M12x1, A-coded as per EN 61076-2-101
• Max. current consumption
  3000 mA
• Power supply, number of pins/wires
  4
• IO-Link®, SIO mode support
  Yes
• IO-Link®, service data contents IN
  32 bit force 32 bit speed
• IO-Link®, number of ports
  1
• Parameterization interface
  IO-Link® User interface
• Ready status indication
  LED
• Power supply, connection pattern
  00995989
• Logic interface, connection type
  Plug
• DC nominal voltage
  24 V
Product weight
1390 g
IO-Link®, process data content IN
1 bit (state device) 1 bit (state out)
IO-Link®, port class
A
IO-Link®, process data content OUT
1 bit (move in) 1 bit (quit error)
Stroke reserve
0 mm
Max. angle of rotation of the piston rod +/-
1 deg
Type code
EPCS
Max. acceleration
5 m/s²
Duty cycle
100%
KC characters
KC EMC
Vibration resistance
Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
Characteristics of logic input
Configurable Not galvanically isolated
Note on ambient temperature
Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
Power supply, connection technology
M12x1, T-coded as per EN 61076-2-111
Max. current of digital logic outputs
100 mA
Power supply, type of connection
Plug
Number of digital logic outputs 24 V DC
2
Number of digital logic inputs
2
IO-Link®, minimum cycle time
1 ms
IO-Link®, communication mode
COM3 (230.4 kBd)
Logic interface, number of poles/wires
8
Rotor position sensor resolution
16 bit
Work range of logic input
24 V
Nominal current
3 A
IO-Link®, process data width OUT
2 Byte
IO-Link®, process data width IN
2 Byte
IO-Link®, data memory required
500 byte
Screw diameter
10 mm
IO-Link®, protocol version
Device V 1.1
Size
45
Spindle pitch
10 mm/U
Design
Electric actuator With integrated drive
Protection against torsion/guide
With plain-bearing guide
Repetition accuracy
±0.02 mm
Stroke
50 mm
Reversing backlash
100 µm
Motor type
Stepper motor
Rotor position sensor measuring principle
Magnetic
Max. speed
0.23 m/s
Storage temperature
-20 °C ... 60 °C
Degree of protection
IP40
Max. feed force Fx
250 N
Piston rod thread
M10x1.25
Mounting position
Any
Symbol
00997294
Rotor position sensor
Absolute encoder, single-turn
Permissible voltage fluctuations
+/- 15 %
Ambient temperature
0 °C ... 50 °C
Max. radial force on actuator shaft
180 N
Additional weight per 10 mm stroke
41 g
Piston rod end
External thread
Spindle type
Ball screw drive
Homing
Fixed stop block positive Reference switch
Insulation protection class
B
Corrosion resistance class (CRC)
0 - No corrosion stress
Relative air humidity
0 - 90 % Non-condensing
Max. torque Mz
2.9 Nm
Guide value for payload, horizontal
40 kg
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Certification
RCM compliance mark
Max. torque My
2.9 Nm
Moving mass at 0 mm stroke
179 g
Type of mounting
With internal thread With accessories
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Max. torque Mx
0 Nm
Guide value for payload, vertical
13 kg
Additional moving mass per 10 mm stroke
4.9 g
Spindle material
Roller bearing steel
Basic weight with 0 mm stroke
1185 g
Spindle nut material
Steel
Housing material
Wrought aluminum alloy, smooth-anodized
Piston rod material
High-alloy stainless steel

Related documents 8118281 Specs