8118283 Festo Electric Actuators

Product Details

• Input switching logic
  NPN (negative switching) PNP (positive switching)
• Switching logic at outputs
  NPN (negative switching) PNP (positive switching)
• Logic interface, connection type
  Plug
• Max. current consumption
  3000 mA
• IO-Link®, port class
  A
• KC characters
  KC EMC
• Logic input specification
  Based on IEC 61131-2, type 1
• Vibration resistance
  Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
• Logic interface, connection pattern
  00992264
• Power supply, connection technology
  M12x1, T-coded as per EN 61076-2-111
• Logic interface, connection technology
  M12x1, A-coded as per EN 61076-2-101
• Logic interface, number of poles/wires
  8
• Rotor position sensor resolution
  16 bit
• IO-Link®, process data content IN
  1 bit (state device) 1 bit (state out)
• IO-Link®, protocol version
  Device V 1.1
• Size
  45
• Max. angle of rotation of the piston rod +/-
  1 deg
• Piston rod end
  External thread
• Symbol
  00997294
• Homing
  Fixed stop block positive Reference switch
Max. speed
0.23 m/s
Insulation protection class
B
Ambient temperature
0 °C ... 50 °C
Max. torque My
2.9 Nm
Guide value for payload, vertical
13 kg
Type of mounting
With internal thread With accessories
Max. cable length
15 m outputs 20 m for IO-Link® operation
Additional functions
User interface Integrated end-position sensing
Characteristics of digital logic outputs
Configurable Not galvanically isolated
DC nominal voltage
24 V
Nominal current
3 A
IO-Link®, service data contents IN
32 bit force 32 bit speed
IO-Link®, number of ports
1
Stroke reserve
0 mm
Reversing backlash
100 µm
Design
Electric actuator With integrated drive
Rotor position sensor
Absolute encoder, single-turn
Duty cycle
100%
Corrosion resistance class (CRC)
0 - No corrosion stress
Max. torque Mx
0 Nm
Moving mass at 0 mm stroke
179 g
Additional weight per 10 mm stroke
41 g
Additional moving mass per 10 mm stroke
4.9 g
Piston rod material
High-alloy stainless steel
Power supply, number of pins/wires
4
Shock resistance
Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
Parameterization interface
IO-Link® User interface
Power supply, connection pattern
00995989
Note on ambient temperature
Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
Max. current of digital logic outputs
100 mA
Number of digital logic inputs
2
Work range of logic input
24 V
Product weight
1800 g
IO-Link®, minimum cycle time
1 ms
IO-Link®, process data content OUT
1 bit (move in) 1 bit (quit error)
Stroke
150 mm
Type code
EPCS
Mounting position
Any
Spindle type
Ball screw drive
Max. acceleration
5 m/s²
Permissible voltage fluctuations
+/- 15 %
Degree of protection
IP40
Certification
RCM compliance mark
Max. feed force Fx
250 N
Display
LED
Ready status indication
LED
Characteristics of logic input
Configurable Not galvanically isolated
Power supply, type of connection
Plug
Number of digital logic outputs 24 V DC
2
IO-Link®, SIO mode support
Yes
IO-Link®, process data width OUT
2 Byte
IO-Link®, data memory required
500 byte
Spindle pitch
10 mm/U
Screw diameter
10 mm
Motor type
Stepper motor
Protection against torsion/guide
With plain-bearing guide
Repetition accuracy
±0.02 mm
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Storage temperature
-20 °C ... 60 °C
Max. radial force on actuator shaft
180 N
Housing material
Wrought aluminum alloy, smooth-anodized
Spindle material
Roller bearing steel
IO-Link®, process data width IN
2 Byte
IO-Link®, communication mode
COM3 (230.4 kBd)
Piston rod thread
M10x1.25
Rotor position sensor measuring principle
Magnetic
Relative air humidity
0 - 90 % Non-condensing
Max. torque Mz
2.9 Nm
Guide value for payload, horizontal
40 kg
Basic weight with 0 mm stroke
1185 g
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Spindle nut material
Steel

Related documents 8118283 Specs