8118287 Festo Electric Actuators
Part#:8118287
Manufacturer:Festo
Alt. Part#:EPCS-BS-60-50-5P-A-ST-M-H1-PLK-AA
Product Lifecycle:Active
Get a quick Quote!
electric cylinder unit EPCS-BS-60-50-5P-A-ST-M-H1-PLK-AA Size: 60, Stroke: 50 mm, Stroke reserve: 0 mm, Piston rod thread: M12x1,25, Reversing backlash: 100 µm
About the manufacturer: Festo is one of the manufacturers that offers Electric Actuators that you can order at marketplace.quotebeam.com. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.
Check out the 8118287 Festo price in the box on the right side or send a quick quote.
Product Details
- Display LED
- Ready status indication LED
- Note on ambient temperature Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
- Logic interface, connection technology M12x1, A-coded as per EN 61076-2-101
- Number of digital logic inputs 2
- Product weight 2639 g
- IO-Link®, service data contents IN 32 bit force 32 bit speed
- IO-Link®, minimum cycle time 1 ms
- IO-Link®, data memory required 500 byte
- Piston rod thread M12x1.25
- Screw diameter 12 mm
- Spindle type Ball screw drive
- Rotor position sensor Absolute encoder, single-turn
- Permissible voltage fluctuations +/- 15 %
- Relative air humidity 0 - 90 % Non-condensing
- Guide value for payload, vertical 46 kg
- Additional weight per 10 mm stroke 69 g
- Basic weight with 0 mm stroke 2294 g
- Spindle nut material Steel
- Mounting position Any
- Max. cable length 15 m outputs 20 m for IO-Link® operation
- Logic input specification Based on IEC 61131-2, type 1
- Additional functions User interface Integrated end-position sensing
- Power supply, connection pattern 00995989
- Max. current of digital logic outputs 100 mA
- DC nominal voltage 24 V
- IO-Link®, SIO mode support Yes
- IO-Link®, process data width OUT 2 Byte
- IO-Link®, process data content OUT 1 bit (move in) 1 bit (quit error)
- Size 60
- Max. angle of rotation of the piston rod +/- 1 deg
- Protection against torsion/guide With plain-bearing guide
- Max. speed 0.09 m/s
- CE marking (see declaration of conformity) As per EU EMC directive As per EU RoHS directive
- Degree of protection IP40
- Max. torque Mz 6.4 Nm
- Max. torque Mx 0 Nm
- Max. feed force Fx 900 N
- Type of mounting With internal thread With accessories
- KC characters KC EMC
- Vibration resistance Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
- Switching logic at outputs NPN (negative switching) PNP (positive switching)
- Power supply, connection technology M12x1, T-coded as per EN 61076-2-111
- Number of digital logic outputs 24 V DC 2
- Max. current consumption 5300 mA
- Nominal current 5.3 A
- IO-Link®, process data width IN 2 Byte
- IO-Link®, number of ports 1
- Stroke reserve 0 mm
- Piston rod end External thread
- Symbol 00997294
- Rotor position sensor measuring principle Magnetic
- Max. acceleration 1.5 m/s²
- Storage temperature -20 °C ... 60 °C
- Ambient temperature 0 °C ... 50 °C
- Max. radial force on actuator shaft 230 N
- Additional moving mass per 10 mm stroke 6.5 g
- Note on materials Contains paint-wetting impairment substances RoHS-compliant
- Piston rod material High-alloy stainless steel
- Shock resistance Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
- Input switching logic NPN (negative switching) PNP (positive switching)
- Parameterization interface IO-Link® User interface
- Logic interface, connection pattern 00992264
- Power supply, type of connection Plug
- Work range of logic input 24 V
- Rotor position sensor resolution 16 bit
- IO-Link®, process data content IN 1 bit (state device) 1 bit (state out)
- Stroke 50 mm
- Spindle pitch 5 mm/U
- Motor type Stepper motor
- Homing Fixed stop block positive Reference switch
- Duty cycle 100%
- Insulation protection class B
- Certification RCM compliance mark
- Guide value for payload, horizontal 120 kg
- Characteristics of logic input Configurable Not galvanically isolated
- Characteristics of digital logic outputs Configurable Not galvanically isolated
- Logic interface, connection type Plug
- Logic interface, number of poles/wires 8
- Power supply, number of pins/wires 4
- IO-Link®, port class A
- IO-Link®, protocol version Device V 1.1
- IO-Link®, communication mode COM3 (230.4 kBd)
- Reversing backlash 100 µm
- Type code EPCS
- Design Electric actuator With integrated drive
- Repetition accuracy ±0.02 mm
- Corrosion resistance class (CRC) 0 - No corrosion stress
- Max. torque My 6.4 Nm
- Moving mass at 0 mm stroke 305 g
- Housing material Wrought aluminum alloy, smooth-anodized
- Spindle material Roller bearing steel
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
Related documents 8118287 Specs
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Festo
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Festo Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Festo Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Festo, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨