8118288 Festo Electric Actuators

Product Details

• Vibration resistance
  Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
• Parameterization interface
  IO-Link® User interface
• Characteristics of digital logic outputs
  Configurable Not galvanically isolated
• Number of digital logic inputs
  2
• Work range of logic input
  24 V
• IO-Link®, process data content IN
  1 bit (state device) 1 bit (state out)
• IO-Link®, process data width OUT
  2 Byte
• IO-Link®, data memory required
  500 byte
• Display
  LED
• Ready status indication
  LED
• Logic interface, connection pattern
  00992264
• Logic interface, connection technology
  M12x1, A-coded as per EN 61076-2-101
• Max. current consumption
  5300 mA
• Rotor position sensor resolution
  16 bit
• IO-Link®, process data width IN
  2 Byte
• IO-Link®, protocol version
  Device V 1.1
• Stroke
  100 mm
• Spindle pitch
  5 mm/U
• Mounting position
  Any
• Symbol
  00997294
Insulation protection class
B
Max. torque Mz
6.4 Nm
Guide value for payload, horizontal
120 kg
Moving mass at 0 mm stroke
305 g
Spindle nut material
Steel
Stroke reserve
0 mm
Reversing backlash
100 µm
Characteristics of logic input
Configurable Not galvanically isolated
Power supply, connection pattern
00995989
Logic interface, connection type
Plug
Max. current of digital logic outputs
100 mA
Product weight
2984 g
IO-Link®, service data contents IN
32 bit force 32 bit speed
IO-Link®, number of ports
1
Piston rod thread
M12x1.25
Max. angle of rotation of the piston rod +/-
1 deg
Motor type
Stepper motor
Rotor position sensor
Absolute encoder, single-turn
Max. acceleration
1.5 m/s²
Relative air humidity
0 - 90 % Non-condensing
Max. torque Mx
0 Nm
Additional weight per 10 mm stroke
69 g
Type of mounting
With internal thread With accessories
Spindle material
Roller bearing steel
KC characters
KC EMC
Max. cable length
15 m outputs 20 m for IO-Link® operation
Additional functions
User interface Integrated end-position sensing
Switching logic at outputs
NPN (negative switching) PNP (positive switching)
Power supply, type of connection
Plug
Number of digital logic outputs 24 V DC
2
Power supply, number of pins/wires
4
Nominal current
5.3 A
IO-Link®, minimum cycle time
1 ms
IO-Link®, process data content OUT
1 bit (move in) 1 bit (quit error)
Size
60
Piston rod end
External thread
Protection against torsion/guide
With plain-bearing guide
Rotor position sensor measuring principle
Magnetic
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Certification
RCM compliance mark
Max. feed force Fx
900 N
Guide value for payload, vertical
46 kg
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Piston rod material
High-alloy stainless steel
Screw diameter
12 mm
Type code
EPCS
Shock resistance
Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
Input switching logic
NPN (negative switching) PNP (positive switching)
Logic input specification
Based on IEC 61131-2, type 1
Note on ambient temperature
Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
Power supply, connection technology
M12x1, T-coded as per EN 61076-2-111
DC nominal voltage
24 V
Logic interface, number of poles/wires
8
IO-Link®, SIO mode support
Yes
IO-Link®, port class
A
IO-Link®, communication mode
COM3 (230.4 kBd)
Design
Electric actuator With integrated drive
Homing
Fixed stop block positive Reference switch
Repetition accuracy
±0.02 mm
Corrosion resistance class (CRC)
0 - No corrosion stress
Storage temperature
-20 °C ... 60 °C
Ambient temperature
0 °C ... 50 °C
Max. radial force on actuator shaft
230 N
Additional moving mass per 10 mm stroke
6.5 g
Spindle type
Ball screw drive
Max. speed
0.09 m/s
Duty cycle
100%
Permissible voltage fluctuations
+/- 15 %
Degree of protection
IP40
Max. torque My
6.4 Nm
Basic weight with 0 mm stroke
2294 g
Housing material
Wrought aluminum alloy, smooth-anodized

Related documents 8118288 Specs