8118291 Festo Electric Actuators

Product Details

• KC characters
  KC EMC
• Vibration resistance
  Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
• Shock resistance
  Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
• Logic input specification
  Based on IEC 61131-2, type 1
• Switching logic at outputs
  NPN (negative switching) PNP (positive switching)
• Max. cable length
  15 m outputs 20 m for IO-Link® operation
• Input switching logic
  NPN (negative switching) PNP (positive switching)
• Ready status indication
  LED
• Characteristics of logic input
  Configurable Not galvanically isolated
• Power supply, connection technology
  M12x1, T-coded as per EN 61076-2-111
• Number of digital logic outputs 24 V DC
  2
• Work range of logic input
  24 V
• IO-Link®, process data content IN
  1 bit (state device) 1 bit (state out)
• IO-Link®, process data width IN
  2 Byte
• IO-Link®, communication mode
  COM3 (230.4 kBd)
• Display
  LED
• Parameterization interface
  IO-Link® User interface
• Power supply, connection pattern
  00995989
• Logic interface, connection technology
  M12x1, A-coded as per EN 61076-2-101
• Power supply, number of pins/wires
  4
Product weight
4019 g
IO-Link®, SIO mode support
Yes
IO-Link®, process data width OUT
2 Byte
IO-Link®, number of ports
1
Reversing backlash
100 µm
Mounting position
Any
Rotor position sensor
Absolute encoder, single-turn
Max. speed
0.09 m/s
Storage temperature
-20 °C ... 60 °C
Ambient temperature
0 °C ... 50 °C
Max. radial force on actuator shaft
230 N
Additional moving mass per 10 mm stroke
6.5 g
Spindle material
Roller bearing steel
Additional functions
User interface Integrated end-position sensing
Characteristics of digital logic outputs
Configurable Not galvanically isolated
Max. current of digital logic outputs
100 mA
Number of digital logic inputs
2
IO-Link®, service data contents IN
32 bit force 32 bit speed
IO-Link®, minimum cycle time
1 ms
IO-Link®, data memory required
500 byte
Stroke reserve
0 mm
Spindle pitch
5 mm/U
Design
Electric actuator With integrated drive
Rotor position sensor measuring principle
Magnetic
Repetition accuracy
±0.02 mm
Relative air humidity
0 - 90 % Non-condensing
Max. torque My
6.4 Nm
Moving mass at 0 mm stroke
305 g
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Spindle nut material
Steel
Note on ambient temperature
Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
Logic interface, connection type
Plug
Max. current consumption
5300 mA
Rotor position sensor resolution
16 bit
IO-Link®, port class
A
IO-Link®, process data content OUT
1 bit (move in) 1 bit (quit error)
Size
60
Type code
EPCS
Spindle type
Ball screw drive
Homing
Fixed stop block positive Reference switch
Duty cycle
100%
Permissible voltage fluctuations
+/- 15 %
Degree of protection
IP40
Max. torque Mx
0 Nm
Guide value for payload, horizontal
120 kg
Guide value for payload, vertical
46 kg
Type of mounting
With internal thread With accessories
Logic interface, connection pattern
00992264
Power supply, type of connection
Plug
DC nominal voltage
24 V
Logic interface, number of poles/wires
8
Nominal current
5.3 A
IO-Link®, protocol version
Device V 1.1
Stroke
250 mm
Piston rod thread
M12x1.25
Max. angle of rotation of the piston rod +/-
1 deg
Piston rod end
External thread
Protection against torsion/guide
With plain-bearing guide
Insulation protection class
B
Corrosion resistance class (CRC)
0 - No corrosion stress
Max. feed force Fx
900 N
Additional weight per 10 mm stroke
69 g
Housing material
Wrought aluminum alloy, smooth-anodized
Screw diameter
12 mm
Motor type
Stepper motor
Symbol
00997294
Max. acceleration
1.5 m/s²
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Certification
RCM compliance mark
Max. torque Mz
6.4 Nm
Basic weight with 0 mm stroke
2294 g
Piston rod material
High-alloy stainless steel

Related documents 8118291 Specs