8118297 Festo Electric Actuators

Product Details

• KC characters
  KC EMC
• Display
  LED
• Input switching logic
  NPN (negative switching) PNP (positive switching)
• Switching logic at outputs
  NPN (negative switching) PNP (positive switching)
• Characteristics of digital logic outputs
  Configurable Not galvanically isolated
• Logic interface, connection type
  Plug
• Number of digital logic inputs
  2
• Ready status indication
  LED
• Note on ambient temperature
  Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
• Power supply, connection pattern
  00995989
• Number of digital logic outputs 24 V DC
  2
• Max. current consumption
  5300 mA
• IO-Link®, SIO mode support
  Yes
• IO-Link®, process data width IN
  2 Byte
• IO-Link®, minimum cycle time
  1 ms
• IO-Link®, data memory required
  500 byte
• Spindle pitch
  12 mm/U
• Shock resistance
  Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
• Logic input specification
  Based on IEC 61131-2, type 1
• Parameterization interface
  IO-Link® User interface
Logic interface, connection pattern
00992264
Power supply, type of connection
Plug
Max. current of digital logic outputs
100 mA
Max. cable length
15 m outputs 20 m for IO-Link® operation
Characteristics of logic input
Configurable Not galvanically isolated
Logic interface, connection technology
M12x1, A-coded as per EN 61076-2-101
Logic interface, number of poles/wires
8
Nominal current
5.3 A
Vibration resistance
Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
Additional functions
User interface Integrated end-position sensing
Power supply, connection technology
M12x1, T-coded as per EN 61076-2-111
DC nominal voltage
24 V
Power supply, number of pins/wires
4
Work range of logic input
24 V
IO-Link®, process data width OUT
2 Byte
IO-Link®, protocol version
Device V 1.1
Size
60
Max. angle of rotation of the piston rod +/-
1 deg
Symbol
00997294
Max. speed
0.22 m/s
Insulation protection class
B
Degree of protection
IP40
Max. torque My
6.4 Nm
Product weight
2984 g
IO-Link®, process data content IN
1 bit (state device) 1 bit (state out)
IO-Link®, process data content OUT
1 bit (move in) 1 bit (quit error)
Stroke reserve
0 mm
Piston rod thread
M12x1.25
Motor type
Stepper motor
Rotor position sensor measuring principle
Magnetic
Repetition accuracy
±0.02 mm
Relative air humidity
0 - 90 % Non-condensing
Max. torque Mx
0 Nm
Rotor position sensor resolution
16 bit
IO-Link®, service data contents IN
32 bit force 32 bit speed
IO-Link®, communication mode
COM3 (230.4 kBd)
Reversing backlash
100 µm
Type code
EPCS
Design
Electric actuator With integrated drive
Max. acceleration
5 m/s²
Permissible voltage fluctuations
+/- 15 %
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Ambient temperature
0 °C ... 50 °C
IO-Link®, port class
A
IO-Link®, number of ports
1
Stroke
100 mm
Screw diameter
12 mm
Mounting position
Any
Spindle type
Ball screw drive
Rotor position sensor
Absolute encoder, single-turn
Duty cycle
100%
Storage temperature
-20 °C ... 60 °C
Certification
RCM compliance mark
Max. feed force Fx
375 N
Piston rod end
External thread
Protection against torsion/guide
With plain-bearing guide
Homing
Fixed stop block positive Reference switch
Corrosion resistance class (CRC)
0 - No corrosion stress
Max. radial force on actuator shaft
230 N
Moving mass at 0 mm stroke
305 g
Housing material
Wrought aluminum alloy, smooth-anodized
Max. torque Mz
6.4 Nm
Basic weight with 0 mm stroke
2294 g
Piston rod material
High-alloy stainless steel
Guide value for payload, vertical
18 kg
Additional moving mass per 10 mm stroke
6.5 g
Spindle nut material
Steel
Guide value for payload, horizontal
56 kg
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Spindle material
Roller bearing steel
Additional weight per 10 mm stroke
69 g
Type of mounting
With internal thread With accessories

Related documents 8118297 Specs