8118300 Festo Electric Actuators

Product Details

• Shock resistance
  Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
• Logic input specification
  Based on IEC 61131-2, type 1
• Characteristics of logic input
  Configurable Not galvanically isolated
• Logic interface, connection pattern
  00992264
• Logic interface, connection type
  Plug
• Power supply, number of pins/wires
  4
• IO-Link®, SIO mode support
  Yes
• IO-Link®, port class
  A
• IO-Link®, data memory required
  500 byte
• Stroke
  250 mm
• Max. angle of rotation of the piston rod +/-
  1 deg
• Motor type
  Stepper motor
• Rotor position sensor
  Absolute encoder, single-turn
• Repetition accuracy
  ±0.02 mm
• Permissible voltage fluctuations
  +/- 15 %
• Relative air humidity
  0 - 90 % Non-condensing
• Max. torque My
  6.4 Nm
• Guide value for payload, horizontal
  56 kg
• Max. cable length
  15 m outputs 20 m for IO-Link® operation
• Parameterization interface
  IO-Link® User interface
Characteristics of digital logic outputs
Configurable Not galvanically isolated
Number of digital logic inputs
2
Nominal current
5.3 A
IO-Link®, minimum cycle time
1 ms
IO-Link®, communication mode
COM3 (230.4 kBd)
Stroke reserve
0 mm
Reversing backlash
100 µm
Spindle type
Ball screw drive
Homing
Fixed stop block positive Reference switch
Max. speed
0.22 m/s
Storage temperature
-20 °C ... 60 °C
Max. torque Mz
6.4 Nm
Moving mass at 0 mm stroke
305 g
Vibration resistance
Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
Switching logic at outputs
NPN (negative switching) PNP (positive switching)
Logic interface, connection technology
M12x1, A-coded as per EN 61076-2-101
Number of digital logic outputs 24 V DC
2
Max. current consumption
5300 mA
IO-Link®, service data contents IN
32 bit force 32 bit speed
IO-Link®, process data width IN
2 Byte
IO-Link®, number of ports
1
Screw diameter
12 mm
Mounting position
Any
Protection against torsion/guide
With plain-bearing guide
Max. acceleration
5 m/s²
Corrosion resistance class (CRC)
0 - No corrosion stress
Degree of protection
IP40
Max. torque Mx
0 Nm
Guide value for payload, vertical
18 kg
Additional moving mass per 10 mm stroke
6.5 g
Spindle nut material
Steel
Ready status indication
LED
Note on ambient temperature
Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
Power supply, type of connection
Plug
DC nominal voltage
24 V
Work range of logic input
24 V
Product weight
4019 g
IO-Link®, process data width OUT
2 Byte
IO-Link®, process data content OUT
1 bit (move in) 1 bit (quit error)
Piston rod thread
M12x1.25
Type code
EPCS
Design
Electric actuator With integrated drive
Rotor position sensor measuring principle
Magnetic
Duty cycle
100%
Insulation protection class
B
Certification
RCM compliance mark
Max. radial force on actuator shaft
230 N
Additional weight per 10 mm stroke
69 g
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Spindle material
Roller bearing steel
KC characters
KC EMC
Display
LED
Input switching logic
NPN (negative switching) PNP (positive switching)
Additional functions
User interface Integrated end-position sensing
Power supply, connection pattern
00995989
Power supply, connection technology
M12x1, T-coded as per EN 61076-2-111
Max. current of digital logic outputs
100 mA
Logic interface, number of poles/wires
8
Rotor position sensor resolution
16 bit
IO-Link®, process data content IN
1 bit (state device) 1 bit (state out)
IO-Link®, protocol version
Device V 1.1
Size
60
Spindle pitch
12 mm/U
Piston rod end
External thread
Symbol
00997294
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Ambient temperature
0 °C ... 50 °C
Max. feed force Fx
375 N
Basic weight with 0 mm stroke
2294 g
Piston rod material
High-alloy stainless steel
Type of mounting
With internal thread With accessories
Housing material
Wrought aluminum alloy, smooth-anodized

Related documents 8118300 Specs