8118302 Festo Electric Actuators

Product Details

• Vibration resistance
  Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
• Parameterization interface
  IO-Link® User interface
• KC characters
  KC EMC
• Display
  LED
• Ready status indication
  LED
• Note on ambient temperature
  Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
• Power supply, connection technology
  M12x1, T-coded as per EN 61076-2-111
• Logic interface, connection type
  Plug
• Number of digital logic outputs 24 V DC
  2
• Rotor position sensor resolution
  16 bit
• IO-Link®, process data content IN
  1 bit (state device) 1 bit (state out)
• IO-Link®, protocol version
  Device V 1.1
• IO-Link®, communication mode
  COM3 (230.4 kBd)
• Stroke reserve
  0 mm
• Spindle pitch
  12 mm/U
• Design
  Electric actuator With integrated drive
• Protection against torsion/guide
  With plain-bearing guide
• Max. cable length
  15 m outputs 20 m for IO-Link® operation
• Additional functions
  User interface Integrated end-position sensing
• Characteristics of digital logic outputs
  Configurable Not galvanically isolated
DC nominal voltage
24 V
Logic interface, number of poles/wires
8
Nominal current
5.3 A
IO-Link®, port class
A
IO-Link®, number of ports
1
IO-Link®, data memory required
500 byte
Symbol
00997294
Insulation protection class
B
Permissible voltage fluctuations
+/- 15 %
Max. torque Mz
6.4 Nm
Shock resistance
Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
Input switching logic
NPN (negative switching) PNP (positive switching)
Switching logic at outputs
NPN (negative switching) PNP (positive switching)
Power supply, type of connection
Plug
Number of digital logic inputs
2
Work range of logic input
24 V
Product weight
4709 g
IO-Link®, process data content OUT
1 bit (move in) 1 bit (quit error)
Piston rod thread
M12x1.25
Piston rod end
External thread
Rotor position sensor measuring principle
Magnetic
Rotor position sensor
Absolute encoder, single-turn
Storage temperature
-20 °C ... 60 °C
Relative air humidity
0 - 90 % Non-condensing
Max. radial force on actuator shaft
230 N
Guide value for payload, vertical
18 kg
Logic input specification
Based on IEC 61131-2, type 1
Characteristics of logic input
Configurable Not galvanically isolated
Power supply, connection pattern
00995989
Logic interface, connection technology
M12x1, A-coded as per EN 61076-2-101
Max. current consumption
5300 mA
IO-Link®, SIO mode support
Yes
IO-Link®, process data width OUT
2 Byte
Stroke
350 mm
Screw diameter
12 mm
Max. angle of rotation of the piston rod +/-
1 deg
Motor type
Stepper motor
Homing
Fixed stop block positive Reference switch
Repetition accuracy
±0.02 mm
Corrosion resistance class (CRC)
0 - No corrosion stress
Degree of protection
IP40
Guide value for payload, horizontal
56 kg
Type of mounting
With internal thread With accessories
Piston rod material
High-alloy stainless steel
Logic interface, connection pattern
00992264
Max. current of digital logic outputs
100 mA
Power supply, number of pins/wires
4
IO-Link®, service data contents IN
32 bit force 32 bit speed
IO-Link®, process data width IN
2 Byte
IO-Link®, minimum cycle time
1 ms
Size
60
Reversing backlash
100 µm
Type code
EPCS
Mounting position
Any
Spindle type
Ball screw drive
Max. speed
0.22 m/s
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Certification
RCM compliance mark
Max. torque My
6.4 Nm
Basic weight with 0 mm stroke
2294 g
Housing material
Wrought aluminum alloy, smooth-anodized
Max. acceleration
5 m/s²
Duty cycle
100%
Ambient temperature
0 °C ... 50 °C
Max. torque Mx
0 Nm
Moving mass at 0 mm stroke
305 g
Additional weight per 10 mm stroke
69 g
Spindle nut material
Steel
Max. feed force Fx
375 N
Additional moving mass per 10 mm stroke
6.5 g
Spindle material
Roller bearing steel
Note on materials
Contains paint-wetting impairment substances RoHS-compliant

Related documents 8118302 Specs