8133352 Festo Servo Amplifiers

Product Details

• Fieldbus interface, transmission rate
  100 Mbit/s
• Ethernet interface, function
  Parameterization and commissioning
• Fieldbus interface, connection type
  2x socket
• Number of inputs for motor temperature sensor
  1
• Number of high-speed logic inputs
  2
• Number of safe 2-pin inputs
  2
• Max. current consumption for logic supply with parking brake
  2 A
• Based on norm
  EN 50581 EN 62061
• Safety integrity level (SIL)
  Safe brake control (SBC)/SIL 3/SILCL 3 Safe torque off (STO)/SIL 3/SILCL 3
• Output frequency
  0 Hz ... 599 Hz
• Impedance of setpoint input
  70 kOhm
• Pulse power of braking resistor
  13.6 kVA
• Max. DC link voltage
  800 V
• Nominal voltage, load supply DC
  560 V
• Mains frequency
  48 Hz ... 62 Hz
• Peak power
  12000 VA
• Peak current, load supply
  27 A
• Load supply permissible range
  ± 10 %
• Certificate issuing authority
  German Technical Control Board (TÜV) Rheinland 01/205/5640.00/18 UL E331130
• Degree of protection
  IP20
Number of analog setpoint inputs
1
Logic input specification
Based on IEC 61131-2, type 3
Operating range of analog inputs
± 10 V
Ethernet interface, protocol
TCP/IP
Protection class
I
Encoder interface 2, function
Incremental encoder SIN/COS encoder
Number of floating switching outputs
1
Pulse energy for braking resistor
1200 Ws
Max. voltage drop from logic supply to brake output
1 V
Conforms to standard
EN 61800-3 EN ISO 13849-1
Controller operating mode
Cascade control Autotuning
Display
LED green/yellow/red
Output voltage range AC
3x (0 – input) V
Max. current of digital logic outputs
20 mA
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Ambient temperature
0 °C ... 50 °C
UL-ambient temperature
0 °C ... 40 °C
Number of digital logic inputs
12
Encoder interface output, characteristics
1 MHz maximum output frequency max. 16384 ppr
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Mounting position
Free convection Vertical
Mains types
TN IT
Fieldbus interface, protocol
PROFINET IRT PROFINET RT
Number of diagnostic outputs
2
Max. short circuit protection of mains
10 kA
Braking resistor nominal power (IEC)
100 W
Active PFC
no
Mode of operation
Field-oriented regulation 1x SYNC interface for encoder emulation or encoder input
Control elements
Optional: CDSB operating unit
Hardware fault tolerance
1
Max. length of motor cable without ext. mains filter
25 m
Input voltage range AC
200 V ... 480 V
Nominal current per phase, effective
7 A
Max. current consumption for logic supply without clamping brake
0.5 A
Contamination level
2
Storage temperature
-25 °C ... 55 °C
Product weight
4100 g
Work range of setpoint input
± 10 V
Encoder interface input, characteristics
1 MHz maximum output frequency max. 16384 ppr
Switching logic at outputs
PNP (positive switching)
Type of mounting
Mounting plate, screwed on
Fieldbus interface, function
Bus connection, incoming/forwarding PROFINET slave
Information on max. installation height
1% power reduction/100 m above 1000 m.
Encoder interface, function
EnDat® 2.1 encoder SIN/COS encoder
Overvoltage category
III
Number of high-speed switching outputs
2
Max. current of the floating switching outputs
50 mA
Max. output current of holding brake
1.5 A
Max. installation height
2000 m
Time resolution of high-speed switching outputs
1 µs
Line filter
Integrated
Braking resistor, external
60 Ohm ... 85 Ohm
Characteristics of digital logic outputs
Freely configurable in some cases Diagnostic outputs in some cases
Max. peak current duration
2 s
Nominal voltage, logic supply DC
24 V
Nominal operating voltage phases
3-phase
Surge resistance
6 kV
Permissible range of logic voltage
± 20 %
Note on ambient temperature
Above an ambient temperature of 40 °C, the power must be reduced by 3%/°C.
Number of digital logic outputs 24 V DC
6
Work range of logic input
-3 V ... 30 V
Characteristics of setpoint inputs
Differential inputs Configurable for current/force
Fieldbus coupling
PROFINET
Type code
CMMT-AS
KC characters
KC EMC
Fieldbus interface, connection technology
RJ45
Synchronization interface, function
Encoder emulation A/B/Z Encoder input A/B/Z
Max. continuous output of the external braking resistor (IEC)
1500 W
System voltage to EN 61800-5-1
300 V
Time resolution of high-speed logic inputs
1 µs
Safety function
Safe brake control (SBC) Safe stop 1 (SS1)
Performance Level (PL)
Safe brake control (SBC)/category 3, performance level e Safe torque off (STO)/category 4, performance level e
Braking resistor, integrated
47 Ohm
Diagnostic coverage
97 %
Nominal operating voltage AC
400 V
Controller nominal power
4000 VA
Nominal current load supply
9 A
SFF safe failure fraction
99 %
Max. current consumption for logic supply with clamping brake and I/O
2.5 A
Peak current per phase, effective
21 A
Permissible voltage fluctuations
+/- 10 %
Relative air humidity
5 - 90 % Non-condensing
Certification
RCM compliance mark c UL us - Listed (OL)
Communication profile
PROFIdrive PROFIenergy
Process interfacing
AC1: Adjustable-Speed Drives AC4: Synchronous Servo Application
Input switching logic
PNP (positive switching)
Characteristics of logic input
Freely configurable in some cases Not galvanically isolated

Related documents 8133352 Specs