NPORT S9450I-2S-ST-HV-T Moxa Data & Networking Devices
Part#:NPORT S9450I-2S-ST-HV-T
Manufacturer:Moxa
Product Lifecycle:Active
In-stock parts: 8
Dec 23, 2024
4-port RS-232/422/485 rugged device server, 3 10/100BaseT(X) ports, 2 100M single-mode fiber ports with ST connectors, 88 to 300 VDC or 85 to 264 VAC, -40 to 85°C operating temperature
Check out the NPORT S9450I-2S-ST-HV-T Moxa price in the box on the right side or send a quick quote.
Product Details
- Warranty Period 5 years
- Vibration IEC 60068-2-6, IEC 60068-2-64
- Time 347,436 hrs
- Green Product RoHS, CRoHS, WEEE
- Safety EN 61010-2-201, UL 61010-2-201
- Hazardous Locations UL/cUL Class I Division 2 Groups A/B/C/D
- Power Substation IEC 61850-3, IEEE 1613
- Shock IEC 60068-2-27
- Environmental Testing IEC 60068-2-2; IEC 60068-2-14
- EMC EN 61000-6-2/-6-4
- EMS IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV; IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m; IEC 61000-4-4 EFT: Power: 4 kV; Signal: 4 kV; IEC 61000-4-5 Surge: Power: 6 kV; Signal: 4 kV; IEC 61000-4-6 CS: 150 kHz to 80 MHz: 10 V/m; Signal: 10 V/m; IEC 61000-4
- Dimensions 80 x 160 x 109 mm (3.15 x 6.30 x 4.29 in)
- EMI CISPR 32, FCC Part 15B Class A
- Ambient Relative Humidity 5 to 95% (non-condensing)
- Weight Product only: 2.54 kg (5.60 lb)
- Operating Temperature -40 to 85°C (-40 to 185°F)
- Storage Temperature (package included) -40 to 85°C (-40 to 185°F)
- Reverse Polarity Protection Supported
- Installation DIN-rail mounting, Wall mounting (with optional kit)
- Input Voltage 110/220 VAC/VDC (110 to 220 VAC, 110 to 220 VDC)
- Housing Metal
- Max. No. of Outstation Connections 32
- Input Current 80 mA @ 110 VDC
- Max. No. of Master Connections 16
- No. of Power Inputs 2
- Power Connector 1 removable 5-contact terminal block(s)
- Max. No. of Client Connections 32
- Max. No. of Server Connections 16
- RS-485-2w Data+, Data-, GND
- Ethernet Interface Turbo Ring, Master, Coupler, Reserved
- RS-485-4w Tx+, Tx-, Rx+, Rx-, GND
- RS-232 TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
- Console Port RS-232 (TxD, RxD, GND), 10-pin RJ45 (19200, n, 8, 1)
- Terminator for RS-485 120 ohms
- RS-422 Tx+, Tx-, Rx+, Rx-, GND
- Pull High/Low Resistor for RS-485 1 kilo-ohm, 150 kilo-ohms
- Isolation 2 kV
- RS-485 Data Direction Control ADDC® (automatic data direction control)
- Flow Control None, RTS/CTS, XON/XOFF
- Baudrate 50 bps to 921.6 kbps (supports non-standard baudrates)
- Surge 4 kV
- Stop Bits 1, 1.5, 2
- Parity None, Even, Odd, Space, Mark
- Serial Standards RS-232, RS-422, RS-485
- Data Bits 5, 6, 7, 8
- Operation Modes Real COM mode, RFC2217 mode, TCP Client mode, TCP Server mode, UDP mode, Modbus mode, DNP3 mode, DNP3 Raw Socket mode, Disabled
- Security HTTPS/SSL, Local Account Accessibility, TACACS+, RADIUS, SSH
- Connector DB9 male
- MIB Bridge MIB, Device Settings MIB, Ethernet-like MIB, MIB-II, P-BRIDGE MIB, Q-BRIDGE MIB, RFC1213, RFC1317, RMON MIB Groups 1, 2, 3, 9, RSTP MIB
- Redundancy Protocols RSTP, Turbo Chain, Turbo Ring v1, Turbo Ring v2
- Industrial Protocols Modbus TCP Server (Slave), DNP3 TCP Outstation
- No. of Ports 4
- Time Management NTP Server/Client, SNTP
- Android API Android 3.1.x and later
- Windows Real COM Drivers Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1/10 (x86/x64), Windows 2008 R2/2012/2012 R2/2016/2019 (x64), Windows Embedded CE 5.0/6.0, Windows XP Embedded
- Linux Real TTY Drivers Kernel versions: 2.4.x, 2.6.x, 3.x, 4.x, and 5.x
- IGMP Groups 256
- Configuration Options Web Console (HTTP/HTTPS), Windows Utility, Device Search Utility (DSU), MCC Tool, Command Line Interface (CLI) through Serial/Telnet/SSH
- Digital Inputs +13 to +30 V for state 1; -30 to +1 V for state 0; Max. input current: 8 mA
- Priority Queues 4
- Management DHCP Client, DHCP Option 82, HTTP, IEC 61850 MMS, IPv4, LLDP, Port Mirror, RARP, RMON, SMTP, SNMPv1/v2c/v3, Syslog, Telnet, TFTP, Web Console
- VLAN ID Range VID 1 to 4094
- Filter GMRP, GVRP, IGMP v1/v2
- Fixed TTY Drivers SCO UNIX, SCO OpenServer, UnixWare 7, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i, Mac OS X, macOS 10.12, macOS 10.13, macOS 10.14, macOS 10.15
- Alarm Contact Channels 2, Resistive load: 1 A @ 24 VDC
- Digital Input Channels 2
- Standards IEEE 802.1D-2004 for Spanning Tree Protocol; IEEE 802.1p for Class of Service; IEEE 802.1Q for VLAN Tagging; IEEE 802.1w for Rapid Spanning Tree Protocol; IEEE 802.1X for authentication; IEEE 802.3 for 10BaseT; IEEE 802.3ad for Port Trunk with LACP; IEEE
- Magnetic Isolation Protection 1.5 kV (built-in)
- 100BaseFX Ports (single-mode ST connector) 2
- 10/100BaseT(X) Ports (RJ45 connector) 3
- Max. No. of VLANs 64
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
Related documents NPORT S9450I-2S-ST-HV-T Specs
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price within minutes.
Stock:
8
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Moxa
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Moxa Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Moxa Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Moxa, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
