Name: FX-551L3-P-C2
Brand: Panasonic

This item can ship within 24h!

FX-301P

$156.06

Panasonic FX-301P is an amplifier designed for sensor applications, featuring a digital fiber sensor amplifier with a red LED for illumination. It is equipped with functions such as interference prevention, OFF-delay/ON-delay timer ranging from 0.5ms to 500ms, and a one-shot timer for enhanced control. The case cover is made from polycarbonate, while the housing utilizes heat-resistant ABS material. This part comes pre-equipped with a connector for easy installation. It includes protection features like outputs short-circuit protection to ensure durability and longevity. The FX-301P operates at a wavelength of 650 nm and can function within an ambient air temperature range of -10 to +55°C. It supports both Light-ON and Dark-ON operating modes. The current consumption is 30mA (0.03 A) under normal conditions and 24mA (0.024 A) in Eco mode, both at 24Vdc. It offers a digital output (PNP open-collector / 24Vdc / 100mA) and has a variable response time from 35µs (0.000035 s) in H-SP mode to 2ms (0.002 s) in LONG mode. The visual position indicator includes an orange LED for operation, a green LED for stability, and additional LEDs for various modes. A 4-digit red LED display provides clear readouts, and the power consumption is 0.96 W in normal mode and 0.84 W in Eco mode.

Panasonic

FX-MR2

Verified stock: 225

Panasonic FX-MR2 is a lens designed specifically for sensors with zoom capabilities. It features a variable spot diameter ranging from 0.7 to 2.0mm when used with FD-42G or FD-42GW. The lens operates effectively within an ambient air temperature range of -40 to +70 degrees Celsius. It is engineered to facilitate a sensing distance between 18.5mm and 43mm, catering to a variety of proximity detection requirements.

Panasonic

This item can ship within 24h!

NX5-M30A

$127.50

Verified stock: 16

Panasonic NX5-M30A is a long sensing range multi-voltage photoelectric sensor emitter+receiver pair designed for a variety of applications. It operates within an ambient air temperature range of -20 to +55°C and is connected via a pre-wired 2m 5-core 0.3mm2 cable terminated with bare end flying leads. This sensor supports a supply voltage range of 24Vac to 240Vac and boasts a degree of protection rated at IP66, ensuring its durability in various environmental conditions. The housing and lens of the NX5-M30A are made from polycarbonate, contributing to its robustness. It features a sensing distance of up to 30m and utilizes infrared (IR) light with a wavelength of 880 nm for detection. The power consumption is minimal, with the emitter consuming 1.5 VA and the receiver 2 VA. It operates in a Light-ON mode and includes a visual position indicator with a red LED for operation, a green LED for stability, and a red LED for Power-ON, facilitating easy monitoring and status indication.

Panasonic

This item can ship within 24h!

CN-14A-C5

$10.20

Verified stock: 8

Panasonic CN-14A-C5 is a cable featuring a 4-pin connector with an attached cable that measures 5 meters in length.

Panasonic

AFP0RA21

Verified stock: 24

Panasonic AFP0RA21 is an I/O unit categorized under the Expansion Units sub-range, designed specifically as an Analog I/O Unit for right-side expansion. It features screw-clamp terminal connections for secure installation and is mounted using a DIN rail system. The unit is equipped with 1 analog output, supporting a range of outputs including -10...+10Vdc, -5...+5Vdc, 0-10Vdc, 0-5Vdc, 0-20mA, and 4-20mA. Additionally, it includes 2 analog inputs, each capable of reading -10...+10Vdc, -5...+5Vdc, 0-10Vdc, 0-5Vdc, and 0-20mA with a high resolution of 1/16000, facilitating precise measurement and control in automation systems.

Panasonic

This item can ship within 24h!

AIGT8142

$41.82

Verified stock: 40

Panasonic AIGT8142 is a connector designed for P.L.C. connection, featuring a 5-pin mini DIN connector and 4 single wires plus a shielding wire. It operates on a supply voltage of 5Vdc and uses the RS-232C communication protocol. The cable has a length of 2 meters or approximately 6.56 feet.

Panasonic

This item can ship within 24h!

AIGT8162

$42.84

Verified stock: 5

Panasonic AIGT8162 is a connector designed for P.L.C. connection, featuring a 5-pin mini DIN connector and 3 single wires plus a shielding wire. It operates on a 24Vdc supply voltage and utilizes the RS-232C communication protocol. The cable has a length of 2 meters or approximately 6.56 feet.

Panasonic

This item can ship within 24h!

FX-101

$68.76

Verified stock: 9

Panasonic FX-101 is an amplifier designed for sensor applications, featuring a digital fiber sensor amplifier with an interference prevention function and an OFF-delay/ON-delay timer adjustable from 0.01ms to 1s. It offers three light emission levels plus an auto-setting option, utilizing a red light color at a wavelength of 643 nm. The housing, switch, and fiber lock lever are constructed from polycarbonate, PBT, and polycarbonate materials, respectively. This part is pre-equipped with a connector for ease of connection and includes outputs short-circuit protection among its protection functions. It operates within an ambient air temperature range of -10 to +55 °C and offers both Light-ON and Dark-ON operating modes. The current consumption is 30mA (0.03 A) under normal conditions and 25mA (0.025 A) in Eco mode, both at 24Vdc. It features 1 x digital output (NPN open-collector / 24Vdc / 100mA) and has response times ranging from 250µs (0.00025 s) to 600µs (0.0006 s) across four frequency settings. An orange LED serves as a visual position indicator, lighting up when the output is ON. The display is comprised of a 4-digit red LED display and a 4-digit green LED display, with a time delay feature adjustable from 0.01ms to 1s (0.00001-1 s). Power consumption is 0.72 W under normal conditions and 0.6 W in Eco mode.

Panasonic

This item can ship within 24h!

FX-301P

$156.06

Verified stock: 466

Panasonic FX-301P is an amplifier designed for sensor applications, featuring a digital fiber sensor amplifier with a red LED for illumination. It is equipped with functions such as interference prevention, OFF-delay/ON-delay timer ranging from 0.5ms to 500ms, and a one-shot timer for enhanced control. The case cover is made from polycarbonate, while the housing utilizes heat-resistant ABS material. This part comes pre-equipped with a connector for easy installation. It includes protection features like outputs short-circuit protection to ensure durability and longevity. The FX-301P operates at a wavelength of 650 nm and can function within an ambient air temperature range of -10 to +55°C. It supports both Light-ON and Dark-ON operating modes. The current consumption is 30mA (0.03 A) under normal conditions and 24mA (0.024 A) in Eco mode, both at 24Vdc. It offers a digital output (PNP open-collector / 24Vdc / 100mA) and has a variable response time from 35µs (0.000035 s) in H-SP mode to 2ms (0.002 s) in LONG mode. The visual position indicator includes an orange LED for operation, a green LED for stability, and additional LEDs for various modes. A 4-digit red LED display provides clear readouts, and the power consumption is 0.96 W in normal mode and 0.84 W in Eco mode.

Panasonic

FX-MR2

Verified stock: 225

Panasonic FX-MR2 is a lens designed specifically for sensors with zoom capabilities. It features a variable spot diameter ranging from 0.7 to 2.0mm when used with FD-42G or FD-42GW. The lens operates effectively within an ambient air temperature range of -40 to +70 degrees Celsius. It is engineered to facilitate a sensing distance between 18.5mm and 43mm, catering to a variety of proximity detection requirements.

Panasonic

This item can ship within 24h!

NX5-M30A

$127.50

Verified stock: 16

Panasonic NX5-M30A is a long sensing range multi-voltage photoelectric sensor emitter+receiver pair designed for a variety of applications. It operates within an ambient air temperature range of -20 to +55°C and is connected via a pre-wired 2m 5-core 0.3mm2 cable terminated with bare end flying leads. This sensor supports a supply voltage range of 24Vac to 240Vac and boasts a degree of protection rated at IP66, ensuring its durability in various environmental conditions. The housing and lens of the NX5-M30A are made from polycarbonate, contributing to its robustness. It features a sensing distance of up to 30m and utilizes infrared (IR) light with a wavelength of 880 nm for detection. The power consumption is minimal, with the emitter consuming 1.5 VA and the receiver 2 VA. It operates in a Light-ON mode and includes a visual position indicator with a red LED for operation, a green LED for stability, and a red LED for Power-ON, facilitating easy monitoring and status indication.

Panasonic

This item can ship within 24h!

CN-14A-C5

$10.20

Verified stock: 8

Panasonic CN-14A-C5 is a cable featuring a 4-pin connector with an attached cable that measures 5 meters in length.

Panasonic

AFP0RA21

Verified stock: 24

Panasonic AFP0RA21 is an I/O unit categorized under the Expansion Units sub-range, designed specifically as an Analog I/O Unit for right-side expansion. It features screw-clamp terminal connections for secure installation and is mounted using a DIN rail system. The unit is equipped with 1 analog output, supporting a range of outputs including -10...+10Vdc, -5...+5Vdc, 0-10Vdc, 0-5Vdc, 0-20mA, and 4-20mA. Additionally, it includes 2 analog inputs, each capable of reading -10...+10Vdc, -5...+5Vdc, 0-10Vdc, 0-5Vdc, and 0-20mA with a high resolution of 1/16000, facilitating precise measurement and control in automation systems.

Panasonic

This item can ship within 24h!

AIGT8142

$41.82

Verified stock: 40

Panasonic AIGT8142 is a connector designed for P.L.C. connection, featuring a 5-pin mini DIN connector and 4 single wires plus a shielding wire. It operates on a supply voltage of 5Vdc and uses the RS-232C communication protocol. The cable has a length of 2 meters or approximately 6.56 feet.

Panasonic

This item can ship within 24h!

AIGT8162

$42.84

Verified stock: 5

Panasonic AIGT8162 is a connector designed for P.L.C. connection, featuring a 5-pin mini DIN connector and 3 single wires plus a shielding wire. It operates on a 24Vdc supply voltage and utilizes the RS-232C communication protocol. The cable has a length of 2 meters or approximately 6.56 feet.

Panasonic

This item can ship within 24h!

FX-101

$68.76

Verified stock: 9

Panasonic FX-101 is an amplifier designed for sensor applications, featuring a digital fiber sensor amplifier with an interference prevention function and an OFF-delay/ON-delay timer adjustable from 0.01ms to 1s. It offers three light emission levels plus an auto-setting option, utilizing a red light color at a wavelength of 643 nm. The housing, switch, and fiber lock lever are constructed from polycarbonate, PBT, and polycarbonate materials, respectively. This part is pre-equipped with a connector for ease of connection and includes outputs short-circuit protection among its protection functions. It operates within an ambient air temperature range of -10 to +55 °C and offers both Light-ON and Dark-ON operating modes. The current consumption is 30mA (0.03 A) under normal conditions and 25mA (0.025 A) in Eco mode, both at 24Vdc. It features 1 x digital output (NPN open-collector / 24Vdc / 100mA) and has response times ranging from 250µs (0.00025 s) to 600µs (0.0006 s) across four frequency settings. An orange LED serves as a visual position indicator, lighting up when the output is ON. The display is comprised of a 4-digit red LED display and a 4-digit green LED display, with a time delay feature adjustable from 0.01ms to 1s (0.00001-1 s). Power consumption is 0.72 W under normal conditions and 0.6 W in Eco mode.

Panasonic

This item can ship within 24h!

FX-301P

$156.06

Verified stock: 466

Panasonic FX-301P is an amplifier designed for sensor applications, featuring a digital fiber sensor amplifier with a red LED for illumination. It is equipped with functions such as interference prevention, OFF-delay/ON-delay timer ranging from 0.5ms to 500ms, and a one-shot timer for enhanced control. The case cover is made from polycarbonate, while the housing utilizes heat-resistant ABS material. This part comes pre-equipped with a connector for easy installation. It includes protection features like outputs short-circuit protection to ensure durability and longevity. The FX-301P operates at a wavelength of 650 nm and can function within an ambient air temperature range of -10 to +55°C. It supports both Light-ON and Dark-ON operating modes. The current consumption is 30mA (0.03 A) under normal conditions and 24mA (0.024 A) in Eco mode, both at 24Vdc. It offers a digital output (PNP open-collector / 24Vdc / 100mA) and has a variable response time from 35µs (0.000035 s) in H-SP mode to 2ms (0.002 s) in LONG mode. The visual position indicator includes an orange LED for operation, a green LED for stability, and additional LEDs for various modes. A 4-digit red LED display provides clear readouts, and the power consumption is 0.96 W in normal mode and 0.84 W in Eco mode.

Panasonic

FX-MR2

Verified stock: 225

Panasonic FX-MR2 is a lens designed specifically for sensors with zoom capabilities. It features a variable spot diameter ranging from 0.7 to 2.0mm when used with FD-42G or FD-42GW. The lens operates effectively within an ambient air temperature range of -40 to +70 degrees Celsius. It is engineered to facilitate a sensing distance between 18.5mm and 43mm, catering to a variety of proximity detection requirements.

Panasonic

This item can ship within 24h!

NX5-M30A

$127.50

Verified stock: 16

Panasonic NX5-M30A is a long sensing range multi-voltage photoelectric sensor emitter+receiver pair designed for a variety of applications. It operates within an ambient air temperature range of -20 to +55°C and is connected via a pre-wired 2m 5-core 0.3mm2 cable terminated with bare end flying leads. This sensor supports a supply voltage range of 24Vac to 240Vac and boasts a degree of protection rated at IP66, ensuring its durability in various environmental conditions. The housing and lens of the NX5-M30A are made from polycarbonate, contributing to its robustness. It features a sensing distance of up to 30m and utilizes infrared (IR) light with a wavelength of 880 nm for detection. The power consumption is minimal, with the emitter consuming 1.5 VA and the receiver 2 VA. It operates in a Light-ON mode and includes a visual position indicator with a red LED for operation, a green LED for stability, and a red LED for Power-ON, facilitating easy monitoring and status indication.

Panasonic

This item can ship within 24h!

CN-14A-C5

$10.20

Verified stock: 8

Panasonic CN-14A-C5 is a cable featuring a 4-pin connector with an attached cable that measures 5 meters in length.

Panasonic

FX-551L3-P-C2 Panasonic Through Beam Sensors

Part#:FX-551L3-P-C2

Manufacturer:Panasonic

Product condition

FX-551L3-P-C2 Description

Panasonic Disclaimer:

Relevant products

FX-301P

FX-MR2

NX5-M30A

CN-14A-C5

AFP0RA21

AIGT8142

AIGT8162

FX-101

FX-301P

FX-MR2

NX5-M30A

CN-14A-C5

AFP0RA21

AIGT8142

AIGT8162

FX-101

FX-301P

FX-MR2

NX5-M30A

CN-14A-C5

We are a proud member of: