Bryan Obida

Live support:

Monday - Friday 6AM - 6PM PST

MFDLNB3SE Panasonic Motion Controllers

Panasonic MFDLNB3SE Panasonic MFDLNB3SE is an AC Servo Drive featuring IGBT PWM Sinusoidal wave drive with a built-in regenerative resistor, allowing for external resistor connection as well. It incorporates a built-in dynamic brake and supports multiple control functions including position control, speed control, and combined position/speed control. Designed for operation in ambient air temperatures ranging from 0-55 °C, it has a rated current of 120 A and falls under the F-frame - Basic type sub-range. This servo drive accepts a three-phase input and communicates via USB protocol. Its operating modes are tailored for analog/pulse specifications, including 6 control signal outputs, 3 line driver pulse signal outputs, and 1 open collector pulse signal output. It is equipped with protection functions against over-voltage, under-voltage, over-speed, overload, over-heat, over-current, and encoder errors. The device also features 10 control signal inputs, 1 Photo-coupler pulse signal input, and 1 line receiver pulse signal input for digital inputs, operates on a 200 V supply voltage, and uses an LED to indicate status. Additionally, it provides 2 analog monitor outputs for comprehensive monitoring capabilities.

Panasonic

Part#:MFDLNB3SE

Manufacturer:Panasonic

Product Lifecycle:Active

Get a quick Quote!

Panasonic MFDLNB3SE is an AC Servo Drive featuring IGBT PWM Sinusoidal wave drive with a built-in regenerative resistor, allowing for external resistor connection as well. It incorporates a built-in dynamic brake and supports multiple control functions including position control, speed control, and combined position/speed control. Designed for operation in ambient air temperatures ranging from 0-55 °C, it has a rated current of 120 A and falls under the F-frame - Basic type sub-range. This servo drive accepts a three-phase input and communicates via USB protocol. Its operating modes are tailored for analog/pulse specifications, including 6 control signal outputs, 3 line driver pulse signal outputs, and 1 open collector pulse signal output. It is equipped with protection functions against over-voltage, under-voltage, over-speed, overload, over-heat, over-current, and encoder errors. The device also features 10 control signal inputs, 1 Photo-coupler pulse signal input, and 1 line receiver pulse signal input for digital inputs, operates on a 200 V supply voltage, and uses an LED to indicate status. Additionally, it provides 2 analog monitor outputs for comprehensive monitoring capabilities.

About the manufacturer: Panasonic is one of the manufacturers that offers Motion Controllers that you can order at marketplace.quotebeam.com. Panasonic is a leading supplier of cutting-edge automation control solutions that are both advanced and cost-effective. With a significant presence in a variety of industrial sectors globally, including automotive, semiconductor, packaging, and OEMs, our product lineup features PLCs, HMI, and other offerings.

Check out the MFDLNB3SE Panasonic price in the box on the right side or send a quick quote.

Product condition

ORIGINAL PACKAGING

SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging

MFDLNB3SE Description

Panasonic MFDLNB3SE is an AC Servo Drive featuring IGBT PWM Sinusoidal wave drive with a built-in regenerative resistor, allowing for external resistor connection as well. It incorporates a built-in dynamic brake and supports multiple control functions including position control, speed control, and combined position/speed control. Designed for operation in ambient air temperatures ranging from 0-55 °C, it has a rated current of 120 A and falls under the F-frame - Basic type sub-range. This servo drive accepts a three-phase input and communicates via USB protocol. Its operating modes are tailored for analog/pulse specifications, including 6 control signal outputs, 3 line driver pulse signal outputs, and 1 open collector pulse signal output. It is equipped with protection functions against over-voltage, under-voltage, over-speed, overload, over-heat, over-current, and encoder errors. The device also features 10 control signal inputs, 1 Photo-coupler pulse signal input, and 1 line receiver pulse signal input for digital inputs, operates on a 200 V supply voltage, and uses an LED to indicate status. Additionally, it provides 2 analog monitor outputs for comprehensive monitoring capabilities.

1-year warranty

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

By purchasing this item, you agree to the Terms & Conditions

Quotebeam is NOT an authorized distributor of Panasonic

Shipping and Delivery Worldwide

calculate costs and time

Secure Payment Processing

with money back guarantee

1 year warranty

on all parts

Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

Panasonic Disclaimer:

The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Panasonic Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Panasonic, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Relevant products

MFDLNB3SG

Verified stock: 0

Panasonic MFDLNB3SG is an AC Servo Drive featuring IGBT PWM Sinusoidal wave drive with a built-in regenerative resistor, allowing for external resistor connection as well. It incorporates a dynamic brake and supports multiple control functions including position control, speed control, and combined position/speed control. Designed for operation in ambient air temperatures ranging from 0 to 55°C, it has a rated current of 120 A and falls under the F-frame - Basic type sub-range. This servo drive accepts a three-phase input and offers versatile communication via USB, RS232, and RS485 protocols. Its operating mode is based on analog/pulse interface specifications, with digital outputs comprising 6 x control signal outputs, 3 x line driver pulse signal outputs, and 1 x open collector pulse signal output. Protection functions include over-voltage, under-voltage, over-speed, overload, over-heat, over-current, and encoder error safeguards. It also features 10 x control signal inputs, 1 x Photo-coupler pulse signal input, and 1 x line receiver pulse signal input for digital inputs, with a supply voltage of 200 V. The device's status is indicated through an LED display, and it provides 2 x analog monitor outputs for analog signaling.

Panasonic

MFDLNB3NE

Verified stock: 0

Panasonic MFDLNB3NE is an AC Servo Drive characterized by its IGBT PWM Sinusoidal wave drive control method. It features a built-in regenerative resistor, with the capability to connect an external resistor, and a built-in dynamic brake. This servo drive supports various control modes including Position control in both Profile position (PP) and Cyclic position (CP) modes, Velocity control in Cyclic velocity (CV) mode, and Torque control in Cyclic torque (CT) mode. It operates within an ambient air temperature range of 0-55 °C and has a rated current of 120 A. As part of the F-frame - Basic type sub-range, it is designed for three-phase input and uses the USB Realtime Express (RTEX) communication protocol. The operating mode follows the RTEX interface specification. It is equipped with 3 control signal outputs and 2 line driver pulse signal outputs for digital outputs, 8 control signal inputs for digital inputs, and 2 analog monitor outputs. The supply voltage requirement for this servo drive is 200 V.

Panasonic

MFDLNA3SG

Verified stock: 0

Panasonic MFDLNA3SG is an AC Servo Drive featuring IGBT PWM Sinusoidal wave drive with a built-in regenerative resistor, allowing for external resistor connection as well. It incorporates a dynamic brake and supports position control, speed control, and combined position/speed control. Designed for operation in ambient air temperatures ranging from 0-55 °C, it has a rated current of 100 A and falls under the F-frame - Basic type sub-range. This servo drive accepts a three-phase input and offers multiple communication protocols including USB, RS232, and RS485. Its operating mode is based on analog/pulse I/f specification, with digital outputs comprising 6 x control signal outputs, 3 x line driver pulse signal outputs, and 1 x open collector pulse signal output. Protection functions include over-voltage, under-voltage, over-speed, over-load, over-heat, over-current, and encoder error. It also features 10 x control signal inputs, 1 x Photo-coupler pulse signal input, and 1 x line receiver pulse signal input for digital inputs, with a supply voltage of 200 V. The display type is LED indicating status, and it has 2 x analog monitor outputs for analog outputs.

Panasonic

MFDLNA3SE

Verified stock: 0

Panasonic MFDLNA3SE is an AC Servo Drive designed for a wide range of automation applications. It features an IGBT PWM Sinusoidal wave drive control method, with both a built-in regenerative resistor and the option to connect an external resistor. This servo drive also includes a built-in dynamic brake and supports multiple control modes such as position control, speed control, and combined position/speed control. It operates within an ambient air temperature range of 0-55°C and has a rated current of 100 A. As part of the F-frame - Basic type sub-range, it requires a three-phase input and communicates via USB. The operating mode is analog/pulse, and it offers 6 control signal outputs, 3 line driver pulse signal outputs, and 1 open collector pulse signal output for digital outputs. Protection functions include over-voltage, under-voltage, over-speed, overload, over-heat, over-current, and encoder error. For digital inputs, it features 10 control signal inputs, 1 Photo-coupler pulse signal input, and 1 line receiver pulse signal input. The supply voltage is set at 200 V, and it includes an LED indicating status for display. Additionally, it provides 2 analog monitor outputs for analog outputs.

Panasonic

MFDLTB3SF

Verified stock: 0

Panasonic MFDLTB3SF is an AC Servo Drive featuring IGBT PWM Sinusoidal wave drive control method. It includes a safety function, a built-in regenerative resistor with an option to connect an external resistor, and a built-in dynamic brake. This servo drive supports various control modes such as position, speed, torque, combined position/speed, combined position/torque, combined speed/torque, and full-closed control. It operates within an ambient air temperature range of 0-55 °C and has a rated current of 120 A. Designed as part of the F-frame - Multi function type sub-range, it accepts a three-phase input and communicates via USB, RS232, and RS485 protocols. The operating mode is based on analog/pulse specifications, including 6 control signal outputs, 3 line driver pulse signal outputs, and 1 open collector pulse signal output for digital outputs. It features 1 x 16-bit A/D and 2 x 12-bit A/D analog inputs, along with 2 analog monitor outputs. Protection functions safeguard against over-voltage, under-voltage, over-speed, overload, over-heat, over-current, and encoder errors. Digital inputs include 10 control signal inputs, 1 Photo-coupler pulse signal input, and 1 line receiver pulse signal input. The supply voltage requirement is 200 V, and it utilizes an LED for indicating status.

Panasonic

MFDLTB3NF

Verified stock: 0

Panasonic MFDLTB3NF is an AC Servo Drive designed for a wide range of automation applications. It operates with a control method of IGBT PWM Sinusoidal wave drive and includes a safety function, a built-in regenerative resistor with an option to connect an external resistor, and a built-in dynamic brake. This servo drive supports multiple control modes including Position control in both Profile position (PP) and Cyclic position (CP) modes, Velocity control in Cyclic velocity (CV) mode, and Torque control in Cyclic torque (CT) mode. It is designed to function within an ambient air temperature range of 0-55 °C and has a rated current of 120 A. As part of the F-frame - Multi function type sub-range, it features a three-phase input type of network and utilizes the USB Realtime Express (RTEX) communication protocol for its operating mode. The MFDLTB3NF is equipped with 3 x control signal outputs and 2 x line driver pulse signal outputs for digital outputs, 8 x control signal inputs for digital inputs, and 2 x analog monitor outputs for analog outputs. It requires a supply voltage of 200 V.

Panasonic

MFDLTA3SF

Verified stock: 0

Panasonic MFDLTA3SF is an AC Servo Drive designed for a wide range of automation applications. It features an IGBT PWM Sinusoidal wave drive control method and incorporates multiple safety and control functions including a built-in regenerative resistor, dynamic brake, and capabilities for position, speed, torque, combined position/speed, combined position/torque, combined speed/torque, and full-closed control. This servo drive operates within an ambient air temperature range of 0-55°C and has a rated current of 100 A. As part of the F-frame - Multi function type sub-range, it supports a three-phase input type of network and offers USB, RS232, and RS485 communication protocols. The operating mode is designed for analog/pulse I/f specification, featuring 6 control signal outputs, 3 line driver pulse signal outputs, and 1 open collector pulse signal output for digital outputs. It also includes 1 x 16-bit A/D and 2 x 12-bit A/D analog inputs, alongside 2 analog monitor outputs for analog connectivity. Protection functions safeguard against over-voltage, under-voltage, over-speed, overload, over-heat, over-current, and encoder errors. The digital inputs consist of 10 control signal inputs, 1 Photo-coupler pulse signal input, and 1 line receiver pulse signal input. This servo drive is powered by a 200 V supply voltage and utilizes an LED display for indicating status.

Panasonic

MFDLTA3NF

Verified stock: 0

Panasonic MFDLTA3NF is an AC Servo Drive designed for a wide range of automation applications. It operates with a control method of IGBT PWM Sinusoidal wave drive and includes a safety function, a built-in regenerative resistor with an option to connect an external resistor, and a built-in dynamic brake. This servo drive supports multiple control modes including Position control in Profile position mode (PP) and Cyclic position mode (CP), Velocity control in Cyclic velocity mode (CV), and Torque control in Cyclic torque mode (CT). It is designed to work within an ambient air temperature range of 0-55 °C and has a rated current of 100 A. As part of the F-frame - Multi function type sub-range, it features a three-phase input type of network and uses USB Realtime Express (RTEX) as its communication protocol. The operating mode follows the RTEX interface specification. It is equipped with 3 x control signal outputs and 2 x line driver pulse signal outputs for digital outputs, 8 x control signal inputs for digital inputs, and 2 x analog monitor outputs for analog outputs. The supply voltage required for operation is 200 V.

Panasonic

MFDLNB3SG

Verified stock: 0

Panasonic MFDLNB3SG is an AC Servo Drive featuring IGBT PWM Sinusoidal wave drive with a built-in regenerative resistor, allowing for external resistor connection as well. It incorporates a dynamic brake and supports multiple control functions including position control, speed control, and combined position/speed control. Designed for operation in ambient air temperatures ranging from 0 to 55°C, it has a rated current of 120 A and falls under the F-frame - Basic type sub-range. This servo drive accepts a three-phase input and offers versatile communication via USB, RS232, and RS485 protocols. Its operating mode is based on analog/pulse interface specifications, with digital outputs comprising 6 x control signal outputs, 3 x line driver pulse signal outputs, and 1 x open collector pulse signal output. Protection functions include over-voltage, under-voltage, over-speed, overload, over-heat, over-current, and encoder error safeguards. It also features 10 x control signal inputs, 1 x Photo-coupler pulse signal input, and 1 x line receiver pulse signal input for digital inputs, with a supply voltage of 200 V. The device's status is indicated through an LED display, and it provides 2 x analog monitor outputs for analog signaling.

Panasonic

MFDLNB3NE

Verified stock: 0

Panasonic MFDLNB3NE is an AC Servo Drive characterized by its IGBT PWM Sinusoidal wave drive control method. It features a built-in regenerative resistor, with the capability to connect an external resistor, and a built-in dynamic brake. This servo drive supports various control modes including Position control in both Profile position (PP) and Cyclic position (CP) modes, Velocity control in Cyclic velocity (CV) mode, and Torque control in Cyclic torque (CT) mode. It operates within an ambient air temperature range of 0-55 °C and has a rated current of 120 A. As part of the F-frame - Basic type sub-range, it is designed for three-phase input and uses the USB Realtime Express (RTEX) communication protocol. The operating mode follows the RTEX interface specification. It is equipped with 3 control signal outputs and 2 line driver pulse signal outputs for digital outputs, 8 control signal inputs for digital inputs, and 2 analog monitor outputs. The supply voltage requirement for this servo drive is 200 V.

Panasonic

MFDLNA3SG

Verified stock: 0

Panasonic MFDLNA3SG is an AC Servo Drive featuring IGBT PWM Sinusoidal wave drive with a built-in regenerative resistor, allowing for external resistor connection as well. It incorporates a dynamic brake and supports position control, speed control, and combined position/speed control. Designed for operation in ambient air temperatures ranging from 0-55 °C, it has a rated current of 100 A and falls under the F-frame - Basic type sub-range. This servo drive accepts a three-phase input and offers multiple communication protocols including USB, RS232, and RS485. Its operating mode is based on analog/pulse I/f specification, with digital outputs comprising 6 x control signal outputs, 3 x line driver pulse signal outputs, and 1 x open collector pulse signal output. Protection functions include over-voltage, under-voltage, over-speed, over-load, over-heat, over-current, and encoder error. It also features 10 x control signal inputs, 1 x Photo-coupler pulse signal input, and 1 x line receiver pulse signal input for digital inputs, with a supply voltage of 200 V. The display type is LED indicating status, and it has 2 x analog monitor outputs for analog outputs.

Panasonic

MFDLNA3SE

Verified stock: 0

Panasonic MFDLNA3SE is an AC Servo Drive designed for a wide range of automation applications. It features an IGBT PWM Sinusoidal wave drive control method, with both a built-in regenerative resistor and the option to connect an external resistor. This servo drive also includes a built-in dynamic brake and supports multiple control modes such as position control, speed control, and combined position/speed control. It operates within an ambient air temperature range of 0-55°C and has a rated current of 100 A. As part of the F-frame - Basic type sub-range, it requires a three-phase input and communicates via USB. The operating mode is analog/pulse, and it offers 6 control signal outputs, 3 line driver pulse signal outputs, and 1 open collector pulse signal output for digital outputs. Protection functions include over-voltage, under-voltage, over-speed, overload, over-heat, over-current, and encoder error. For digital inputs, it features 10 control signal inputs, 1 Photo-coupler pulse signal input, and 1 line receiver pulse signal input. The supply voltage is set at 200 V, and it includes an LED indicating status for display. Additionally, it provides 2 analog monitor outputs for analog outputs.

Panasonic

MFDLTB3SF

Verified stock: 0

Panasonic MFDLTB3SF is an AC Servo Drive featuring IGBT PWM Sinusoidal wave drive control method. It includes a safety function, a built-in regenerative resistor with an option to connect an external resistor, and a built-in dynamic brake. This servo drive supports various control modes such as position, speed, torque, combined position/speed, combined position/torque, combined speed/torque, and full-closed control. It operates within an ambient air temperature range of 0-55 °C and has a rated current of 120 A. Designed as part of the F-frame - Multi function type sub-range, it accepts a three-phase input and communicates via USB, RS232, and RS485 protocols. The operating mode is based on analog/pulse specifications, including 6 control signal outputs, 3 line driver pulse signal outputs, and 1 open collector pulse signal output for digital outputs. It features 1 x 16-bit A/D and 2 x 12-bit A/D analog inputs, along with 2 analog monitor outputs. Protection functions safeguard against over-voltage, under-voltage, over-speed, overload, over-heat, over-current, and encoder errors. Digital inputs include 10 control signal inputs, 1 Photo-coupler pulse signal input, and 1 line receiver pulse signal input. The supply voltage requirement is 200 V, and it utilizes an LED for indicating status.

Panasonic

MFDLTB3NF

Verified stock: 0

Panasonic MFDLTB3NF is an AC Servo Drive designed for a wide range of automation applications. It operates with a control method of IGBT PWM Sinusoidal wave drive and includes a safety function, a built-in regenerative resistor with an option to connect an external resistor, and a built-in dynamic brake. This servo drive supports multiple control modes including Position control in both Profile position (PP) and Cyclic position (CP) modes, Velocity control in Cyclic velocity (CV) mode, and Torque control in Cyclic torque (CT) mode. It is designed to function within an ambient air temperature range of 0-55 °C and has a rated current of 120 A. As part of the F-frame - Multi function type sub-range, it features a three-phase input type of network and utilizes the USB Realtime Express (RTEX) communication protocol for its operating mode. The MFDLTB3NF is equipped with 3 x control signal outputs and 2 x line driver pulse signal outputs for digital outputs, 8 x control signal inputs for digital inputs, and 2 x analog monitor outputs for analog outputs. It requires a supply voltage of 200 V.

Panasonic

MFDLTA3SF

Verified stock: 0

Panasonic MFDLTA3SF is an AC Servo Drive designed for a wide range of automation applications. It features an IGBT PWM Sinusoidal wave drive control method and incorporates multiple safety and control functions including a built-in regenerative resistor, dynamic brake, and capabilities for position, speed, torque, combined position/speed, combined position/torque, combined speed/torque, and full-closed control. This servo drive operates within an ambient air temperature range of 0-55°C and has a rated current of 100 A. As part of the F-frame - Multi function type sub-range, it supports a three-phase input type of network and offers USB, RS232, and RS485 communication protocols. The operating mode is designed for analog/pulse I/f specification, featuring 6 control signal outputs, 3 line driver pulse signal outputs, and 1 open collector pulse signal output for digital outputs. It also includes 1 x 16-bit A/D and 2 x 12-bit A/D analog inputs, alongside 2 analog monitor outputs for analog connectivity. Protection functions safeguard against over-voltage, under-voltage, over-speed, overload, over-heat, over-current, and encoder errors. The digital inputs consist of 10 control signal inputs, 1 Photo-coupler pulse signal input, and 1 line receiver pulse signal input. This servo drive is powered by a 200 V supply voltage and utilizes an LED display for indicating status.

Panasonic

MFDLTA3NF

Verified stock: 0

Panasonic MFDLTA3NF is an AC Servo Drive designed for a wide range of automation applications. It operates with a control method of IGBT PWM Sinusoidal wave drive and includes a safety function, a built-in regenerative resistor with an option to connect an external resistor, and a built-in dynamic brake. This servo drive supports multiple control modes including Position control in Profile position mode (PP) and Cyclic position mode (CP), Velocity control in Cyclic velocity mode (CV), and Torque control in Cyclic torque mode (CT). It is designed to work within an ambient air temperature range of 0-55 °C and has a rated current of 100 A. As part of the F-frame - Multi function type sub-range, it features a three-phase input type of network and uses USB Realtime Express (RTEX) as its communication protocol. The operating mode follows the RTEX interface specification. It is equipped with 3 x control signal outputs and 2 x line driver pulse signal outputs for digital outputs, 8 x control signal inputs for digital inputs, and 2 x analog monitor outputs for analog outputs. The supply voltage required for operation is 200 V.

Panasonic

MFDLNB3SG

Verified stock: 0

Panasonic MFDLNB3SG is an AC Servo Drive featuring IGBT PWM Sinusoidal wave drive with a built-in regenerative resistor, allowing for external resistor connection as well. It incorporates a dynamic brake and supports multiple control functions including position control, speed control, and combined position/speed control. Designed for operation in ambient air temperatures ranging from 0 to 55°C, it has a rated current of 120 A and falls under the F-frame - Basic type sub-range. This servo drive accepts a three-phase input and offers versatile communication via USB, RS232, and RS485 protocols. Its operating mode is based on analog/pulse interface specifications, with digital outputs comprising 6 x control signal outputs, 3 x line driver pulse signal outputs, and 1 x open collector pulse signal output. Protection functions include over-voltage, under-voltage, over-speed, overload, over-heat, over-current, and encoder error safeguards. It also features 10 x control signal inputs, 1 x Photo-coupler pulse signal input, and 1 x line receiver pulse signal input for digital inputs, with a supply voltage of 200 V. The device's status is indicated through an LED display, and it provides 2 x analog monitor outputs for analog signaling.

Panasonic

MFDLNB3NE

Verified stock: 0

Panasonic MFDLNB3NE is an AC Servo Drive characterized by its IGBT PWM Sinusoidal wave drive control method. It features a built-in regenerative resistor, with the capability to connect an external resistor, and a built-in dynamic brake. This servo drive supports various control modes including Position control in both Profile position (PP) and Cyclic position (CP) modes, Velocity control in Cyclic velocity (CV) mode, and Torque control in Cyclic torque (CT) mode. It operates within an ambient air temperature range of 0-55 °C and has a rated current of 120 A. As part of the F-frame - Basic type sub-range, it is designed for three-phase input and uses the USB Realtime Express (RTEX) communication protocol. The operating mode follows the RTEX interface specification. It is equipped with 3 control signal outputs and 2 line driver pulse signal outputs for digital outputs, 8 control signal inputs for digital inputs, and 2 analog monitor outputs. The supply voltage requirement for this servo drive is 200 V.

Panasonic

MFDLNA3SG

Verified stock: 0

Panasonic MFDLNA3SG is an AC Servo Drive featuring IGBT PWM Sinusoidal wave drive with a built-in regenerative resistor, allowing for external resistor connection as well. It incorporates a dynamic brake and supports position control, speed control, and combined position/speed control. Designed for operation in ambient air temperatures ranging from 0-55 °C, it has a rated current of 100 A and falls under the F-frame - Basic type sub-range. This servo drive accepts a three-phase input and offers multiple communication protocols including USB, RS232, and RS485. Its operating mode is based on analog/pulse I/f specification, with digital outputs comprising 6 x control signal outputs, 3 x line driver pulse signal outputs, and 1 x open collector pulse signal output. Protection functions include over-voltage, under-voltage, over-speed, over-load, over-heat, over-current, and encoder error. It also features 10 x control signal inputs, 1 x Photo-coupler pulse signal input, and 1 x line receiver pulse signal input for digital inputs, with a supply voltage of 200 V. The display type is LED indicating status, and it has 2 x analog monitor outputs for analog outputs.

Panasonic

MFDLNA3SE

Verified stock: 0

Panasonic MFDLNA3SE is an AC Servo Drive designed for a wide range of automation applications. It features an IGBT PWM Sinusoidal wave drive control method, with both a built-in regenerative resistor and the option to connect an external resistor. This servo drive also includes a built-in dynamic brake and supports multiple control modes such as position control, speed control, and combined position/speed control. It operates within an ambient air temperature range of 0-55°C and has a rated current of 100 A. As part of the F-frame - Basic type sub-range, it requires a three-phase input and communicates via USB. The operating mode is analog/pulse, and it offers 6 control signal outputs, 3 line driver pulse signal outputs, and 1 open collector pulse signal output for digital outputs. Protection functions include over-voltage, under-voltage, over-speed, overload, over-heat, over-current, and encoder error. For digital inputs, it features 10 control signal inputs, 1 Photo-coupler pulse signal input, and 1 line receiver pulse signal input. The supply voltage is set at 200 V, and it includes an LED indicating status for display. Additionally, it provides 2 analog monitor outputs for analog outputs.

Panasonic

Do you have questions?

We’re here for you ✨

We are a proud member of: