0309109 Phoenix Contact Terminal Blocks

Product Details

• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• Test duration per axis
  5 h
• Width
  8.2 mm
• Smoke gas toxicity NFPA 130 (SMP 800C)
  passed
• Result of tight fit on support
  Test passed
• Shock duration
  18 ms
• Height NS 32
  63.5 mm
• Specific optical density of smoke NFPA 130 (ASTM E 662)
  passed
• Fire protection for rail vehicles (DIN EN 45545-2) R26
  HL 1 - HL 3
• Height NS 35/7,5
  58.5 mm
• Static insulating material application in cold
  -60 °C
• Surface flammability NFPA 130 (ASTM E 162)
  passed
• Fire protection for rail vehicles (DIN EN 45545-2) R23
  HL 1 - HL 3
• Height NS 35/15
  66 mm
• Conductor cross section flexible max.
  10 mm²
• Color
  gray
• Rated surge voltage
  6 kV
• Open side panel
  Yes
• Conductor cross section flexible, with ferrule without plastic sleeve max.
  10 mm²
• Nominal current IN
  57 A
Result of flexion and pull-out test
Test passed
Power frequency withstand voltage setpoint
1.89 kV
Conductor cross section short circuit testing
10 mm²
Temperature-rise test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Acceleration
30g
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Note
Terminal point
Conductor cross section solid max.
16 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
2 conductors with same cross section, solid min.
0.5 mm²
Number of connections
2
Flammability rating according to UL 94
V0
Connection in acc. with standard
CSA
Insulating material group
I
Result of surge voltage test
Test passed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test turns
135
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
4 mm²
Tightening torque, min
1.5 Nm
Screw thread
M4
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 125°C)
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 10.0.1
27141126
ECLASS 7.0
27141126
Short circuit stability result
Test passed
ETIM 6.0
EC000902
UNSPSC 11
39121410
UNSPSC 18.0
39121410
Nominal cross section
10 mm²
Maximum power dissipation for nominal condition
1.82 W
Degree of pollution
3
Back of the hand protection
guaranteed
Setpoint
5 N
Proof of thermal characteristics (needle flame) effective duration
30 s
Conductor cross section flexible min.
0.5 mm²
Conductor cross section AWG max.
6
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
2 conductors with same cross section, stranded max.
4 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Cross section with insertion bridge, stranded max.
10 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
China RoHS
Environmentally Friendly Use Period = 50 years
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.0
27141100
ECLASS 6.0
27141100
ETIM 2.0
EC000902
ETIM 7.0
EC000902
UNSPSC 13.2
39121410
UNSPSC 7.0901
39121410
Test spectrum
Service life test category 2, bogie-mounted
Shock form
Half-sine
Number of shocks per direction
3
Number of levels
1
Bending test rotation speed
10 rpm
Tight fit on carrier
NS 32/NS 35
Short-time current
1.2 kA
Result of thermal test
Test passed
ASD level
6.12 (m/s2)2/Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
End cover width
2.2 mm
Conductor cross section AWG min.
20
Conductor cross section solid min.
0.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
2 conductors with same cross section, stranded min.
0.5 mm²
Cross section with insertion bridge, solid max.
10 mm²
Connection method
Screw connection
Disconnect element
M3 0.6 Nm 0.8 Nm
REACh SVHC
Lead 7439-92-1
ECLASS 4.1
27141100
ECLASS 5.1
27141100
ECLASS 9.0
27141126
UNSPSC 6.01
30211811
UNSPSC 19.0
39121410
UNSPSC 20.0
39121410
Stripping length
11 mm
Tightening torque max
1.8 Nm
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 11.0
27141126
ETIM 3.0
EC000902
ETIM 4.0
EC000902
UNSPSC 12.01
39121410
UNSPSC 21.0
39121410
ECLASS 5.0
27141100
Finger protection
guaranteed
Insulating material
PA
Overvoltage category
III
2 conductors with same cross section, solid max.
6 mm²
Nominal voltage UN
500 V
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Length
61 mm
Maximum load current
76 A (with 16 mm² conductor cross section)
Result of power-frequency withstand voltage test
Test passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
6 mm²