0461018 Phoenix Contact Terminal Blocks

Product Details

• Number of levels
  3
• Degree of pollution
  3
• Connection in acc. with standard
  CSA
• Number of connections
  5
• Flammability rating according to UL 94
  V0
• Maximum load current
  30 A (with 4 mm² conductor cross section)
• Result of surge voltage test
  Test passed
• Bending test turns
  135
• Result of tight fit on support
  Test passed
• Conductor cross section short circuit testing
  4 mm²
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  130 °C
• Static insulating material application in cold
  -60 °C
• Fire protection for rail vehicles (DIN EN 45545-2) R26
  HL 1 - HL 3
• Connection method
  Screw connection
• Conductor cross section AWG max.
  10
• Cross section with insertion bridge, solid max.
  4 mm²
• Insulating material
  PA
• Insulating material group
  I
• Nominal current IN
  30 A
• Power frequency withstand voltage setpoint
  1.89 kV
Tensile test result
Test passed
Setpoint
1 N
Result of temperature-rise test
Test passed
Short-time current
0.48 kA
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Length
66.5 mm
Conductor cross section flexible max.
4 mm²
Color
gray
Overvoltage category
III
Nominal voltage UN
500 V
Checking the mechanical stability of terminal points (5 x conductor connection)
Test passed
Conductor cross section tensile test
4 mm²
Tractive force setpoint
60 N
Requirement, voltage drop 2nd level
≤ 3.2 mV
Short circuit stability result
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Surface flammability NFPA 130 (ASTM E 162)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Width
6.2 mm
Conductor cross section solid min.
0.2 mm²
Conductor cross section AWG min.
24
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
2 conductors with same cross section, solid max.
1.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 125°C)
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 4.0
27141100
ECLASS 6.0
27141100
ETIM 6.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 20.0
39121410
Nominal cross section
4 mm²
Rated surge voltage
6 kV
Maximum power dissipation for nominal condition
1.02 W (the value is multiplied when connecting multiple levels)
Open side panel
Yes
Surge voltage test setpoint
7.3 kV
Bending test rotation speed
10 rpm
Tight fit on carrier
NS 35
Requirements, voltage drop
≤ 6,4 mV
Relative insulation material temperature index (Elec.; UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Height NS 35/7,5
69.5 mm
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
2 conductors with same cross section, solid min.
0.2 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
Screw thread
M3
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 4.1
27141100
ETIM 3.0
EC001329
ETIM 2.0
EC001329
UNSPSC 11
39121410
Result of power-frequency withstand voltage test
Test passed
Result of flexion and pull-out test
Test passed
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Result of voltage-drop test
Test passed
Result of thermal test
Test passed
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
End cover width
2.5 mm
Height NS 35/15
77 mm
Conductor cross section solid max.
4 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
2 conductors with same cross section, stranded min.
0.2 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
Internal cylindrical gage
A3
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 10.0.1
27141120
ECLASS 9.0
27141120
UNSPSC 6.01
30211811
UNSPSC 13.2
39121410
UNSPSC 19.0
39121410
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Cross section with insertion bridge, stranded max.
2.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Tightening torque max
0.8 Nm
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 11.0
27141120
ECLASS 5.1
27141100
ETIM 7.0
EC000897
UNSPSC 18.0
39121410
UNSPSC 21.0
39121410
2 conductors with same cross section, stranded max.
1.5 mm²
Stripping length
8 mm
Tightening torque, min
0.6 Nm
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.0
27141100
ECLASS 7.0
27141125
ETIM 4.0
EC001329
UNSPSC 7.0901
39121410