0713122 Phoenix Contact Terminal Blocks
Part#:0713122
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Get a quick Quote!
Universal terminal with bolt connection, cross-point head screw, cross section: 1 mm² ... 25 mm², width: 18 mm, color: gray
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Terminal Blocks that you can order at marketplace.quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 0713122 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Nominal current IN 101 A
- Back of the hand protection guaranteed
- Surge voltage test setpoint 9.6 kV
- Result of the test for mechanical stability of terminal points (5 x conductor connection) Test passed
- Tight fit on carrier NS 32/NS 35
- Result of temperature-rise test Test passed
- Proof of thermal characteristics (needle flame) effective duration 30 s
- ECLASS 9.0 27141120
- UNSPSC 7.0901 39121410
- UNSPSC 20.0 39121410
- Cable lug connection according to standard DIN 46237:1970-07
- Hole diameter, min. 6.5 mm
- Bolt diameter 6 mm
- Tightening torque, min 3.2 Nm
- Ambient temperature (storage/transport) -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
- Ambient temperature (actuation) -5 °C ... 70 °C
- REACh SVHC Lead 7439-92-1
- ECLASS 11.0 27141120
- ECLASS 5.1 27141100
- ETIM 3.0 EC000897
- UNSPSC 13.2 39121410
- UNSPSC 21.0 39121410
- Number of levels 1
- Potentials 1
- Color gray
- Degree of pollution 3
- Insulating material group I
- Shock protection test specification DIN EN 50274 (VDE 0660-514):2002-11
- Result of power-frequency withstand voltage test Test passed
- Result of tight fit on support Test passed
- Requirement temperature-rise test Increase in temperature ≤ 45 K
- Test frequency f1 = 5 Hz to f2 = 250 Hz
- Test duration per axis 5 h
- Shock duration 18 ms
- Relative insulation material temperature index (Elec., UL 746 B) 130 °C
- Static insulating material application in cold -60 °C
- Calorimetric heat release NFPA 130 (ASTM E 1354) 28 MJ/kg
- Surface flammability NFPA 130 (ASTM E 162) passed
- Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3
- Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3
- Width 18 mm
- Height NS 35/7,5 64.5 mm
- Height NS 32 69.5 mm
- Stripping length The stripping length depends on the specification provided by the cable lug manufacturer.
- Connection in acc. with standard CSA
- Max. cross section for cable lug connection 6 mm²
- AWG max 4
- Cable lug width, max. 16 mm
- Operating temperature -60 °C ... 105 °C (max. short-term operating temperature 130°C)
- Ambient temperature (assembly) -5 °C ... 70 °C
- ECLASS 10.0.1 27141120
- ECLASS 4.1 27141100
- ECLASS 6.0 27141100
- ECLASS 7.0 27141120
- ETIM 7.0 EC000897
- UNSPSC 6.01 30211811
- Nominal cross section 25 mm²
- Flammability rating according to UL 94 V0
- Overvoltage category III
- Maximum power dissipation for nominal condition 3.26 W
- Open side panel Yes
- Result of surge voltage test Test passed
- Bending test rotation speed 10 rpm
- Result of voltage-drop test Test passed
- Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2018-05
- ASD level 6.12 (m/s2)2/Hz
- Test directions X-, Y- and Z-axis (pos. and neg.)
- Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C
- ETIM 4.0 EC002638
- UNSPSC 11 39121410
- UNSPSC 19.0 39121410
- Number of connections 2
- Insulating material PA
- Rated surge voltage 8 kV
- Maximum load current 101 A (with 25 mm² conductor cross section)
- Nominal voltage UN 800 V (the nominal voltage applies to insulated cable lugs)
- Finger protection guaranteed
- Power frequency withstand voltage setpoint 2 kV
- Bending test turns 135
- Setpoint 10 N
- Requirements, voltage drop U1 ≤ 3.2 mV; U2 ≤ 1.5 x U1
- Result of thermal test Test passed
- Test spectrum Service life test category 2, bogie-mounted
- Acceleration 30g
- Shock form Half-sine
- Number of shocks per direction 3
- Specific optical density of smoke NFPA 130 (ASTM E 662) passed
- Smoke gas toxicity NFPA 130 (SMP 800C) passed
- Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3
- Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3
- End cover width 2 mm
- Length 60 mm
- Height NS 35/15 72 mm
- Connection 1 level
- Connection method Bolt connection
- Min. cross section for cable lug connection 2.5 mm²
- AWG min 16
- Screw thread M6
- Tightening torque max 3.7 Nm
- Permissible humidity (storage/transport) 30 % ... 70 %
- China RoHS Environmentally Friendly Use Period = 50 years
- ECLASS 4.0 27141100
- ECLASS 5.0 27141100
- ETIM 2.0 EC000897
- ETIM 6.0 EC000897
- UNSPSC 12.01 39121410
- UNSPSC 18.0 39121410
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨