Bryan Obida

Live support:

Monday - Friday 6AM - 6PM PST

1009222 Phoenix Contact Data & Networking Devices

Phoenix Contact 1009222 Managed Switch 2000, 6 RJ45 ports 10/100/1000 Mbps, 2 SFP ports 100/1000 Mbps, degree of protection: IP20, PROFINET Conformance-Class B, PROFINET mode preset, PROFINET status LEDs
Phoenix Contact

Part#:1009222

Manufacturer:Phoenix Contact

Product Lifecycle:Active

Get a quick Quote!

Managed Switch 2000, 6 RJ45 ports 10/100/1000 Mbps, 2 SFP ports 100/1000 Mbps, degree of protection: IP20, PROFINET Conformance-Class B, PROFINET mode preset, PROFINET status LEDs

About the manufacturer: Phoenix Contact is one of the manufacturers that offers Data & Networking Devices that you can order at marketplace.quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.

Check out the 1009222 Phoenix Contact price in the box on the right side or send a quick quote.

Product Details

  • ECLASS 4.0
    27250501
  • ECLASS 5.1
    19030100
  • UNSPSC 19.0
    43222612
  • Utilization restriction
    Use in potentially explosive areas is not permitted in China.
  • Ambient temperature (storage/transport)
    -40 °C ... 85 °C
  • Permissible humidity (storage/transport)
    10 % ... 95 % (non-condensing)
  • Interface
    SFP module
  • Transmission physics
    Depending on the SFP module
  • Management
    Web-based management (HTTP/HTTPS)
  • IP parameterization
    DHCP-Client
  • MAC address table
    8k
  • Residual ripple
    3.6 VPP (within the permitted voltage range)
  • Max. current consumption
    1.5 A (US = Min, Tamb = Max, DOI = Max)
  • MTTF
    491.44 Years (SN 29500 standard, temperature 25°C, operating cycle 21%)
  • Conductor cross section flexible min.
    0.25 mm²
  • Conductor cross section flexible max.
    1.5 mm²
  • Immunity to surge
    EN 61000-6-2 EN 61000-4-5 (surge) Criterion B
  • Immunity to burst
    EN 61000-6-2 EN 61000-4-4 (EFT burst) Criterion A
  • Shipbuilding approval
    Tested in accordance with IEC 60945 and IACS E10
  • UL, USA
    UL 60079-0, Ed.6 / UL 60079-7, Ed.5
  • China RoHS
    Environmentally Friendly Use Period = 50 years
  • UNSPSC 6.01
    43172015
  • UNSPSC 20.0
    43222612
  • IECEx
    Ex ec IIC T4 Gc
  • ECLASS 11.0
    19170401
  • Height
    130 mm
  • Ambient temperature (operation)
    -40 °C ... 70 °C
  • Basic functions
    Store-and-forward switch, complies with IEEE 802.3
  • PROFINET device function
    PROFINET device
  • Cascading depth
    Network, linear, and star structure: any
  • Supply voltage range
    12 V DC ... 57 V DC
  • Net weight
    440 g
  • Special properties
    PROFINET mode preset, PROFINET status LEDs
  • Conducted noise emission
    EN 61000-6-2 EN 61000-6-4 (conducted interference) Class A
  • Immunity to ESD
    EN 61000-6-2 EN 61000-4-2 (ESD) Criterion B
  • Free from substances that could impair the application of coating
    Yes
  • Noise immunity
    EN 61000-6-2
  • REACh SVHC
    Lead 7439-92-1
  • ECLASS 7.0
    19170106
  • ETIM 3.0
    EC000734
  • UNSPSC 12.01
    43201410
  • Degree of protection
    IP20
  • Degree of pollution
    2
  • Air pressure (operation)
    79 kPa ... 108 kPa up to 2000 m above mean sea level (Without derating)
  • No. of ports
    2 (SFP ports)
  • Transmission length
    up to 80 km (Depending on the fiber/SFP module used)
  • Filter functions
    Quality of Service (8 priority classes)
  • Time synchronization
    SNTP (Simple Network Time Protocol)
  • Status and diagnostic indicators
    LEDs: US1, US2 (power supply), Fail (alarm contact), 2 LEDs per Ethernet port (link/activity and speed), PROFINET status LEDs (BF, SF)
  • Type AX
    Book type
  • Connection method
    Push-in spring connection
  • Conductor cross section AWG max.
    16
  • Interference emission
    EN 61000-6-2 EN 61000-6-4 (interference) Class A
  • Type of test
    Free fall in accordance with EN 61131-2
  • Vibration (storage/transport)
    5g, 150 Hz, in acc. with IEC 60068-2-6
  • UL, Canada
    CSA C22.2 NO.60079-0, Ed.3 / CSA C22.2 NO.60079-7:16
  • ETIM 4.0
    EC000734
  • UNSPSC 7.0901
    43201404
  • Signal LEDs
    Data receive, link status
  • ATEX
     II 3 G Ex ec IIC T4 Gc
  • ECLASS 5.0
    19030100
  • ECLASS 6.0
    19170100
  • UNSPSC 11
    43172015
  • Depth
    115 mm
  • Permissible humidity (operation)
    10 % ... 95 % (non-condensing)
  • Transmission speed
    100/1000 Mbps (full duplex)
  • Configuration memory
    max. 8 GByte (SD card)
  • Additional functions
    Jumbo frames (Max. 9,600 bytes)
  • Signal contact control voltage
    typ. 24 V DC
  • Supply voltage
    24 V DC (redundant)
  • Port security
    MAC-based, RADIUS (IEEE 802.1X)
  • Mounting type
    DIN rail
  • Note
    Support by phone or on-site (fee is charged)
  • Conductor cross section solid max.
    1.5 mm²
  • Stripping length
    9 mm
  • Immunity to EF
    EN 61000-6-2 EN 61000-4-3 (electromagnetic fields) Criterion A
  • Noise emission
    EN 61000-6-3
  • Vibration (operation)
    in acc. with IEC 60068-2-6: 5g, 150 Hz
  • UL, USA/Canada
    Class I, Div. 2, Groups A, B, C, D T4Class I, Zone 2, IIC T4
  • ETIM 7.0
    EC000734
  • UNSPSC 18.0
    43222612
  • Redundancy
    MRP (Media Redundancy Protocol)
  • Diagnostic functions
    RMON History
  • PROFINET conformance class
    Conformance-Class B
  • Maximum conductor length (twisted pair)
    100 m
  • Typical current consumption
    280 mA (at US = 24 V DC and 25 °C ambient temperature)
  • Current consumption
    280 mA
  • ECLASS 4.1
    27250501
  • ECLASS 9.0
    19170106
  • UNSPSC 13.2
    43222612
  • UNSPSC 21.0
    43222612
  • Width
    45 mm
  • Air pressure (storage/transport)
    79 kPa ... 108 kPa up to 2000 m above mean sea level (Without derating)
  • Note on the connection method
    Auto negotiation and autocrossing
  • Housing material
    Polycarbonate fiber reinforced
  • Conductor cross section solid min.
    0.25 mm²
  • Conductor cross section AWG min.
    24
  • Immunity to conducted interference
    EN 61000-6-2 EN 61000-4-6 (line noise immunity) Criterion A
  • Shock (operation)
    30g (EN 60068-2-27)
  • Noxious gas test
    ISA S71.04.2013 G3 Harsh Group A
  • ETIM 6.0
    EC000734
  • Electromagnetic compatibility
    Conformance with EMC Directive 2014/30/EU
  • ECLASS 10.0.1
    19170401

Product condition

ORIGINAL PACKAGING

SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging


1-year warranty

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

By purchasing this item, you agree to the Terms & Conditions

Quotebeam is NOT an authorized distributor of Phoenix Contact

Shipping and Delivery Worldwide

calculate costs and time


Secure Payment Processing

with money back guarantee


1 year warranty

on all parts


Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

Phoenix Contact Disclaimer:

The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Relevant products

Do you have questions?

We’re here for you ✨

We are a proud member of:

Association for High Technology Distribution LogoAssociation for Advancing Automation LogoThe International Society of Automation Logo