1031383 Phoenix Contact Electrical Wires & Cables

Product Details

• Type
  DC charging cable
• Height
  137.8 mm (Vehicle charging connector)
• Depth
  279.4 mm (Vehicle charging connector)
• Max. altitude
  5000 m (above sea level)
• Maximum charging power
  80 kW
• Note on the connection method
  Crimp connection, cannot be disconnected
• Withdrawal force
  < 100 N
• Color handle area
  gray
• Actuating lever material
  Metal
• Flammability rating
  V0
• Wiring standards/regulations
  GB/T 33594-2017
• Cable resistance
  ≤ 0.00121 Ω/m (based on a power core, at an ambient temperature of 20°C)
• Type of conductor
  straight
• Locking type
  Locking option for actuating lever with actuators integrated in the Vehicle Connector
• Long-term stability (max. R0-Drift)
  0.06 % (After 1000 hours at 130°C)
• Temperature coefficient (TCR)
  3850 ppm/K
• ECLASS 11.0
  27144705
• Design
  Generation 2
• Ambient temperature (operation)
  -30 °C ... 50 °C
• Stripping length
  150 mm ±20 mm
Rated voltage for power contacts
1000 V DC
Insertion/withdrawal cycles
> 10000
Housing color
black
Label
14.1 mm x 44.8 mm (customer logo on request)
Material protective cap
Plastic
Material surface of contacts
Ag
Wiring certifications
CQC1105-2015
Minimum bending radius
135 mm (5 x diameter)
Locking detection
Maximum of 24 V / 14 mA via signal lines Lock Detection+ (WHOG) and Lock Detection- (WHBN)
Temperature range
-50 °C ... 130 °C
ECLASS 10.0.1
27144705
ETIM 7.0
EC002897
Application
For charging electric vehicles (EV) with direct current (DC)
Width
77 mm (Vehicle charging connector)
Ambient temperature (storage/transport)
-40 °C ... 80 °C
Rated current of power contacts
80 A
Type of signal transmission
according to GB/T 27930-2015
Insertion force
< 100 N
Design line
Standard
Actuating element color
black
Material handle area
Soft plastic
Wiring class
Class 5/6
Outer sheath, material
TPU
Current supply duration
50 ms ... 100 ms (NOTE: Continuous current supply > 100 ms damages the locking actuator)
Tolerance at the sensor with the recommended measured current
±1K
Shutdown temperature
90 °C equivalent to a Pt 1000 value of 1346.5 Ω
ETIM 6.0
EC002897
Affixed logo
“PHOENIX CONTACT” logo
Standards/regulations
DIN EN 60751
Charging mode
Mode 4
Degree of protection
IP55 (plugged in; when plugged in and ready to operate, the degree of protection is only ensued if both plug-in components are original products from Phoenix Contact or suitable standard-compliant products)
Rated voltage for signal contacts
30 V
Resistor coding
1000 Ω (between PE and CC1 / PE and CC2)
Mating face color
black
Customer variations
On request
Material mating face
Plastic
External cable diameter
27 mm ±0.4 mm
Locking current
2 A
Type of sensor
Pt 1000
ECLASS 9.0
27144705
Charging standard
GB/T
Conductor length
5 m
Number of power contacts
3 (PE, DC+, DC-)
Number of signal contacts
6 (S+, S-, A+, A-, CC1, CC2)
Rated current for signal contacts
20 A ((A+, A-))
Temperature monitoring
2x Pt 1000
Color protective cap
black
Housing material
Plastic
Cable structure
3 x 16 mm² + 2 x 4 mm² + (2 × 0.75 mm²) P + 10 x 0.75 mm²
External sheath, color
black
Recommended measured current
1 mA (1 V at 0°C)
China RoHS
Environmentally Friendly Use Period = 10;