1032734 Phoenix Contact Terminal Blocks

Product Details

• Nominal cross section
  2.5 mm²
• Overvoltage category
  III
• Open side panel
  Yes
• Finger protection
  guaranteed
• Result of power-frequency withstand voltage test
  Test passed
• Setpoint
  1 N
• Result of aging test
  Test passed
• Test spectrum
  Service life test category 2, bogie-mounted
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• End cover width
  2.2 mm
• Length
  68 mm
• Conductor cross section flexible min.
  0.14 mm²
• Conductor cross section flexible, with ferrule without plastic sleeve max.
  2.5 mm²
• REACh SVHC
  Lead 7439-92-1
• ECLASS 10.0.1
  27141127
• ECLASS 7.0
  27141127
• ETIM 4.0
  EC000897
• UNSPSC 7.0901
  39121410
• UNSPSC 18.0
  39121410
• Number of levels
  2
Rated surge voltage
6 kV
Degree of pollution
3
Maximum load current
0.5 A
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Surge voltage test setpoint
7.3 kV
Bending test rotation speed
10 rpm
Short circuit stability result
Test passed
Conductor cross section short circuit testing
4 mm²
Proof of thermal characteristics (needle flame) effective duration
30 s
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2018-05
Number of shocks per direction
3
Connection method
Push-in connection
Conductor cross section solid max.
4 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Color
gray
Insulating material group
I
Back of the hand protection
guaranteed
Bending test turns
135
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Short-time current
0.48 kA
ASD level
6.12 (m/s2)2/Hz
Acceleration
30g
Shock duration
18 ms
Height NS 35/7,5
47.5 mm
Conductor cross section flexible max.
4 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
ECLASS 4.1
27141100
ECLASS 9.0
27141127
ETIM 7.0
EC000903
UNSPSC 13.2
39121410
Note
The max. current is determined by the diode. Installed: Diode 1N 4007, reverse voltage: 1300 V, maximum continuous current: 0.5 A.
Insulating material
PA
Nominal current IN
0.5 A
Nominal voltage UN
500 V
Power frequency withstand voltage setpoint
1.89 kV
Result of flexion and pull-out test
Test passed
Result of tight fit on support
Test passed
Result of thermal test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Test duration per axis
5 h
Shock test result
Test passed
Height
45.8 mm
Height NS 35/15
55 mm
Conductor cross section AWG max.
12
Number of connections
4
Flammability rating according to UL 94
V0
Maximum power dissipation for nominal condition
0.77 W (the value is multiplied when connecting multiple levels)
Result of surge voltage test
Test passed
Checking the mechanical stability of terminal points (5 x conductor connection)
Test passed
Tight fit on carrier
NS 35
Ageing test for screwless modular terminal block temperature cycles
192
Oscillation, broadband noise test result
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Shock form
Half-sine
Width
5.2 mm
Conductor cross section solid min.
0.14 mm²
Conductor cross section AWG min.
26
Internal cylindrical gage
A3
ECLASS 11.0
27141127
ECLASS 4.0
27141100
ECLASS 6.0
27141100
UNSPSC 6.01
30211811
UNSPSC 19.0
39121410
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
0.5 mm²
Stripping length
8 mm ... 10 mm
ECLASS 5.1
27141100
ETIM 3.0
EC000897
ETIM 6.0
EC000903
UNSPSC 12.01
39121410
UNSPSC 21.0
39121410
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
ECLASS 5.0
27141100
ETIM 2.0
EC000897
UNSPSC 11
39121410
UNSPSC 20.0
39121410