1043418 Phoenix Contact Redundancy Modules

Product Details

• Depth
  125 mm
• Ambient temperature (operation)
  -40 °C ... 70 °C (> 60 °C Derating: 2.5 %/K)
• Max. permissible relative humidity (operation)
  ≤ 100 % (at 25 °C, non-condensing)
• Current consumption
  40 A
• Selective Fuse Breaking (ISFB)
  215 A (15 ms)
• Net weight
  0.4 kg
• Assembly instructions
  alignable: PN ≥50%, 5 mm horizontally, 15 mm next to active components, 50 mm verticallyalignable: PN <50%, 0 mm horizontally, 40 mm vertically top, 20 mm vertically bottom
• Stripping length
  8 mm
• EMC requirements for noise immunity
  EN 61000-6-1
• Conducted noise emission
  EN 55016
• Low Voltage Directive
  Conformance with Low Voltage Directive 2014/35/EC
• Electrostatic discharge
  EN 61000-4-2
• Frequency range
  0.15 MHz ... 80 MHz
• I/O/S
  asymmetrical
• Frequency
  16.67 Hz
• ETIM 7.0
  EC000683
• Width with alternative assembly
  122 mm
• Installation distance top/bottom
  50 mm / 50 mm
• Degree of pollution
  2
• Nominal input current
  40 A (-40 °C ... 60 °C)
Output voltage range
8 V DC ... 27.5 V DC
Protection against overvoltage at the output (OVP)
≤ 30 V DC
Protection class
III
Connection method
Push-in connection
Conductor cross section AWG min.
24
Conductor cross section AWG max.
16
Height
130 mm
Installation distance right/left
0 mm / 0 mm
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Installation height
≤ 5000 m (> 2000 m, observe derating)
Nominal output current (IN)
40 A
Dynamic Boost (IDyn.Boost)
60 A (5 s)
Connection in series
No
Housing material
Aluminum / stainless steel
Conductor cross section solid max.
1.5 mm²
EMC requirements for noise emission
EN 61000-6-3
Standard – Safety extra-low voltage
IEC 60950-1 (SELV) and EN 60204-1 (PELV)
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
DNV GL noise radiation
Class B
Contact discharge
8 kV (Test Level 4)
Fast transients (burst)
EN 61000-4-4
Voltage
10 V (Test Level 3)
Power frequency magnetic field
EN 61000-4-8
ECLASS 10.0.1
27371010
Height with alternative assembly
130 mm
Degree of protection
IP20
Climatic class
3K3 (in acc. with EN 60721)
Nominal input voltage range
12 V DC ... 24 V DC
Derating
60 °C ... 70 °C (2.5%/K)
MTBF (IEC 61709, SN 29500)
> 13486000 h (25 °C)
Conductor cross section solid min.
0.2 mm²
Conductor cross section flexible max.
1.5 mm²
Standard - Electrical safety
EN 60950-1/VDE 0805 (SELV)
Standard - Safe isolation
DIN VDE 0100-410
Standard – Protection against shock currents, basic requirements for protective separation in electrical equipment
EN 50178
Additional text
60 s
Discharge in air
15 kV (Test Level 4)
Test field strength
30 A/m
Signal
1 kV (Test Level 2 - asymmetrical)
Conducted interference
EN 61000-4-6
REACh SVHC
Lead 7439-92-1
Width
32 mm
Depth with alternative assembly
35 mm
Inflammability class in acc. with UL 94 (housing / terminal blocks)
V0
Input voltage range
8 V DC ... 27.5 V DC (SELV)
Static Boost (IStat.Boost)
45 A
Power loss nominal load max.
6.5 W (IOUT = 40 A)
Efficiency
typ. 99 % (12 V DC)
Mounting position
horizontal DIN rail NS 35, EN 60715
Conductor cross section flexible min.
0.2 mm²
Screw thread
M4
Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations
EN 50178/VDE 0160 (PELV)
Noise emission
EN 55016
Electromagnetic HF field
EN 61000-4-3
Output
1 kV (Test Level 2 - symmetrical)
Criterion A
Normal operating behavior within the specified limits.
ECLASS 11.0
27371010
ETIM 6.0
EC000683
UL approvals
UL/C-UL listed UL 508
DNV GL conducted interference
Class A
Comments
Criterion A
Input
1 kV (Test Level 4 - symmetrical)
Criterion B
Temporary impairment to operational behavior that is corrected by the device itself.
ECLASS 9.0
27371010