1045933 Phoenix Contact Terminal Blocks

Product Details

• Potentials
  1
• Number of connections
  2
• Rated surge voltage
  6 kV
• Maximum total current
  21 A
• Maximum load current
  21 A (with a 2.5 mm² conductor cross section)
• Finger protection
  guaranteed
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Setpoint
  1 N
• Insulating material
  PA
• Insulating material group
  I
• Nominal voltage UN
  450 V
• Back of the hand protection
  guaranteed
• Tensile test result
  Test passed
• Nominal cross section
  1.5 mm²
• Maximum power dissipation for nominal condition
  0.56 W
• Number of levels
  1
• Color
  black/yellow
• Degree of pollution
  3
• Overvoltage category
  III
• Open side panel
  No
Result of surge voltage test
Test passed
Result of power-frequency withstand voltage test
Test passed
Bending test rotation speed
10 rpm
Result of temperature-rise test
Test passed
Result of voltage-drop test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock test result
Test passed
Number of shocks per direction
3
Length
21.6 mm
Flammability rating according to UL 94
V0
Nominal current IN
17.5 A
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Power frequency withstand voltage setpoint
1.89 kV
Bending test turns
135
Result of tight fit on support
Test passed
Short circuit stability result
Test passed
Result of thermal test
Test passed
Oscillation, broadband noise test result
Test passed
ASD level
6.12 (m/s2)2/Hz
Test duration per axis
5 h
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Connection in acc. with standard
IEC 60998-2-2
Conductor cross section flexible min.
0.14 mm²
Conductor cross section AWG max.
14
Min. AWG conductor cross section, flexible
26
Acceleration
30g
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2018-05
Static insulating material application in cold
-60 °C
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Connection method
Push-in connection
Conductor cross section flexible max.
1.5 mm²
Max. AWG conductor cross section, flexible
14
Internal cylindrical gage
A1 / B1
Permissible humidity (storage/transport)
30 % ... 70 %
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 5.0
27141120
ECLASS 4.0
27141120
ECLASS 9.0
27141120
UNSPSC 7.0901
39121410
UNSPSC 6.01
30211811
Shock duration
18 ms
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Height
17.7 mm
Stripping length
8 mm ... 10 mm
Conductor cross section solid min.
0.34 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
1.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Connection cross sections directly pluggable
0.34 mm² 2.5 mm² 26 14
ECLASS 11.0
27141120
ECLASS 5.1
27141120
ETIM 2.0
EC000897
ETIM 4.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 18.0
39121410
Tight fit on carrier
NS 35/NS 15
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Ageing test for screwless modular terminal block temperature cycles
192
Test spectrum
Service life test category 2, bogie-mounted
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
Short-time current
0.3 kA
Shock form
Half-sine
Width
4.2 mm
Conductor cross section AWG min.
26
Conductor cross section flexible, with ferrule with plastic sleeve max.
1.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 7.0
27141120
ETIM 6.0
EC000897
UNSPSC 13.2
39121410
Result of flexion and pull-out test
Test passed
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Result of aging test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Conductor cross section solid max.
2.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 6.0
27141100
ETIM 7.0
EC000897
UNSPSC 11
39121410
UNSPSC 21.0
39121410
Conductor cross section short circuit testing
2.5 mm²
ECLASS 10.0.1
27141120
ECLASS 4.1
27141120
ETIM 3.0
EC000897
UNSPSC 20.0
39121410
UNSPSC 19.0
39121410