1048292 Phoenix Contact Electrical Wires & Cables

Product Details

• Design
  Generation 1
• Depth
  76.2 mm
• Conductor length
  0.5 m (AC cables)
• Degree of protection
  IP44 (plugged in)
• Rated current of power contacts
  32 A
• Insertion/withdrawal cycles
  > 10000
• Screw connection of a protective cover
  Only rear mounting possible
• Material
  Plastic
• Number of positions of theconnectors
  4
• Recommended adaptation time
  600 ms
• Service life insertion cycles
  > 10000 load cycles
• ECLASS 9.0
  27144706
• Affixed logo
  “PHOENIX CONTACT” logo
• Height
  96 mm
• Bore dimensions
  60 mm x 60 mm
• Ambient temperature (operation)
  -30 °C ... 50 °C
• Number of power contacts
  5 (L1, L2, L3, N, PE)
• Rated current for signal contacts
  2 A
• Insertion force
  < 100 N
• Max. wall thickness
  max. 50 mm (Rear panel mounting, normative maximum specification for infrastructure plug)
Housing color
black
Reverse current of the motor
max. 1 A
Cable length
0.5 m
ECLASS 10.0.1
27144706
ETIM 7.0
EC002898
Application
For charging electric vehicles (EV) with alternating current (AC)
Note on the connection method
Crimp connection, cannot be disconnected
Type of conductor
Single wires
Maximum charging power
22 kW
Rated voltage for power contacts
480 V AC
Rated voltage for signal contacts
30 V AC
Withdrawal force
< 100 N
Mounting position of the locking actuator
Top center
Locking type
Locking in the inserted state with a locking mechanism
Possible power supply range at the motor
9 V ... 16 V
Pause time after entry or exit path
3 s
REACh SVHC
Lead 7439-92-1
ETIM 6.0
EC002898
Charging standard
Type 2
Width
75 mm
Max. altitude
5000 m (above sea level)
Number of phases
3
Type of signal transmission
Pulse width modulation
Restrictions to mounting position
Only 0 to 90 degree frontal inclination possible, see figure
Mounting hole diameter
7.00 mm (ø)
Material surface of contacts
Ag
Maximum voltage for locking detection
30 V
Typical motor current for locking
0.2 A
Lock recognition
available
ECLASS 11.0
27144706
Type
rear protective cover screw connection
Standards/regulations
IEC 62196-2
Charging mode
Mode 3, Case B
Cable structure
4 x 0.5 mm²
Ambient temperature (storage/transport)
-40 °C ... 80 °C
Type of charging current
AC 3-phase
Number of signal contacts
2 (CP, PP)
Possible mounting positions
Rear panel mounting
Design line
Generation 1
Customer variations
On request
Operating voltage
12 V (Typical power supply at the motor)
Max. dwell time with reverse current
1000 ms
Mechanical emergency release
available
China RoHS
Environmentally Friendly Use Period = 10;