1054163 Phoenix Contact Terminal Blocks

Product Details

• Nominal cross section
  10 mm²
• Overvoltage category
  III
• Open side panel
  Yes
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Result of voltage-drop test
  Test passed
• Short-time current
  1.92 kA
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  28 MJ/kg
• Fire protection for rail vehicles (DIN EN 45545-2) R26
  HL 1 - HL 3
• Height NS 35/15
  55 mm
• Tightening torque, min
  1.5 Nm
• Conductor cross section solid max.
  16 mm²
• Max. AWG conductor cross section, flexible
  6
• Number of levels
  1
• Flammability rating according to UL 94
  V0
• Degree of pollution
  3
• Maximum power dissipation for nominal condition
  1.82 W
• Finger protection
  guaranteed
• Result of flexion and pull-out test
  Test passed
• Tensile test result
  Test passed
• Result of temperature-rise test
  Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Width
10.2 mm
Screw thread
M4
Tightening torque max
1.8 Nm
Conductor cross section AWG max.
6
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
2 conductors with same cross section, solid max.
4 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.5 mm²
Internal cylindrical gage
A6
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.0
27141120
ECLASS 9.0
27141120
ETIM 7.0
EC000897
UNSPSC 12.01
39121410
Number of connections
2
Area of application
Railway industry
Nominal current IN
57 A
Shock protection test specification
IEC 60529:2001-02
Power frequency withstand voltage setpoint
2 kV
Bending test turns
135
Tight fit on carrier
NS 35
Conductor cross section short circuit testing
16 mm²
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Length
47.7 mm
Connection method
Screw connection
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section flexible min.
0.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
2 conductors with same cross section, stranded min.
0.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
2.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 10.0.1
27141120
ECLASS 7.0
27141120
ETIM 6.0
EC000897
UNSPSC 13.2
39121410
UNSPSC 20.0
39121410
Color
gray
Insulating material
PA
Insulating material group
I
Nominal voltage UN
800 V
Back of the hand protection
guaranteed
Result of power-frequency withstand voltage test
Test passed
Bending test rotation speed
10 rpm
Bending test conductor cross section/weight
0.5 mm² / 0.3 kg
Setpoint
5 N
Short circuit stability result
Test passed
Result of thermal test
Test passed
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Height
46.9 mm
Stripping length
10 mm
Note
Note: Product releases, connection cross sections and notes on connecting aluminum cables can be found in the download area.
Min. AWG conductor cross section, flexible
20
Conductor cross section flexible, with ferrule without plastic sleeve max.
10 mm²
2 conductors with same cross section, stranded max.
4 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
6 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 11.0
27141120
ECLASS 5.1
27141120
ETIM 4.0
EC000897
UNSPSC 18.0
39121410
Potentials
1
Rated surge voltage
8 kV
Maximum load current
76 A (with 16 mm² conductor cross section)
Result of surge voltage test
Test passed
Result of tight fit on support
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
End cover width
2.2 mm
Height NS 35/7,5
47.5 mm
Conductor cross section solid min.
0.5 mm²
Conductor cross section AWG min.
20
Conductor cross section flexible max.
16 mm²
2 conductors with same cross section, solid min.
0.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.0
27141120
ETIM 2.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 11
39121410
UNSPSC 21.0
39121410
Conductor cross section flexible, with ferrule with plastic sleeve max.
10 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 4.1
27141120
ECLASS 6.0
27141100
ETIM 3.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 19.0
39121410