1065976 Phoenix Contact AC/DC Power Supplies

Product Details

• Depth
  53 mm
• Ambient temperature (operation)
  -25 °C ... 70 °C (Derating >60°C: 2.5 %/K)
• Degree of pollution
  3
• Height
  240 mm
• Inflammability class in acc. with UL 94 (housing / terminal blocks)
  V0
• Permissible humidity (operation)
  ≤ 100 % (at 25 °C, non-condensing)
• Nominal input voltage range
  100 V AC ... 240 V AC
• Current consumption
  2.2 A (100 V AC)
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Degree of protection
  IP67
• Ambient temperature (start-up type tested)
  -25 °C
• Input voltage range
  100 V AC ... 240 V AC 10 %
• Discharge current to PE
  < 3.5 mA
• Nominal power consumption
  285 VA
• Protective circuit/component
  Varistor
• Derating
  > 60 °C ... 70 °C (2.5%/K)
• Connection in parallel
  no
• Output power
  192 W
• Power loss nominal load max.
  < 18 W (120 V AC)
• Protection class
  I
Standards/regulations
EN/IEC 60529
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Electrostatic discharge
EN 61000-4-2
Electromagnetic HF field
EN 61000-4-3
Output
1 kV (Test Level 3 - symmetrical)
Voltage dip
0 %
Frequency
50 Hz
REACh SVHC
Lead 7439-92-1
Width
136 mm
Max. permissible relative humidity (operation)
≤ 100 % (at 25 °C, non-condensing)
Climatic class
3K3 (in acc. with EN 60721)
AC frequency range
50 Hz ... 60 Hz ±10 %
Inrush current
≤ 25 A (typical)
Frequency range (fN)
50 Hz ... 60 Hz ±10 %
Input fuse
6.3 A (internal (device protection))
Type of protection
Transient surge protection
Nominal output voltage
24 V DC ±1 %
Feedback voltage resistance
≤ 35 V DC
Control deviation
< 1 % (change in load, static 10 % ... 90 %)
Efficiency
typ. 91 % (120 V AC)
Insulation voltage input/output
3 kV AC (type test)
Standard designation
Degrees of protection provided by enclosures (IP code)
Conducted noise emission
EN 55016
Noise emission
EN 55016
Test field strength
10 V/m (Test Level 3)
Voltage
230 V AC
Surge voltage load (surge)
EN 61000-4-5
Number of periods
1 period
Criterion B
Temporary impairment to operational behavior that is corrected by the device itself.
Installation height
≤ 4000 m (> 2000 m, Derating: 10 %/1000 m)
Dielectric strength maximum
≤ 300 V AC 15 s
Mains buffering time
> 15 ms (120 V AC)
Power factor (cos phi)
0.93
Nominal output current (IN)
8 A
Connection in series
No
Maximum power dissipation in no-load condition
< 8 W (120 V AC)
MTBF (IEC 61709, SN 29500)
> 1800000 h (25 °C)
Assembly instructions
Alignable: 20 mm horizontally, 50 mm vertically above, 100 mm vertically below
Type of locking
screw locking
Harmonic currents
EN 61000-3-2
Contact discharge
6 kV (Test Level 3)
Comments
Criterion A
Signal
1 kV (Test Level 2 - asymmetrical)
Voltage dips
EN 61000-4-11
Criterion A
Normal operating behavior within the specified limits.
ECLASS 9.0
27040701
Recommended breaker for input protection
6 A ... 16 A (US/CAN: branch circuit protection < 20 A) (Characteristic B, C, D, K or comparable)
Dynamic Boost (IDyn.Boost)
12 A (5 s)
Protection against overvoltage at the output (OVP)
≤ 30 V DC
Residual ripple
≤ 10 mVPP
Net weight
1.5 kg
Connection method
7/8″ circular connector
Range of positions
4 Socket
Low Voltage Directive
Conformance with Low Voltage Directive 2014/35/EC
Frequency range
0.15 MHz ... 80 MHz
Input
2 kV (Test Level 4 - symmetrical)
Fast transients (burst)
EN 61000-4-4
Conducted interference
EN 61000-4-6
Criterion C
Temporary adverse effects on the operating behavior, which the device corrects automatically or which can be restored by actuating the operating elements.