1068590 Phoenix Contact Electrical Wires & Cables

Product Details

• Design
  Generation 1
• Height
  96 mm
• Conductor length
  2.4 m (AC cables)
• Ambient temperature (storage/transport)
  -40 °C ... 80 °C
• Maximum charging power
  22 kW
• Rated current of power contacts
  32 A
• Type of signal transmission
  Pulse width modulation
• Charging mode
  Mode 3, Case B
• Bore dimensions
  60 mm x 60 mm
• Max. altitude
  5000 m (above sea level)
• Number of power contacts
  5 (L1, L2, L3, N, PE)
• Insertion/withdrawal cycles
  > 10000
• Type
  rear protective cover screw connection
• Standards/regulations
  IEC 62196-2
• Width
  75 mm
• Depth
  76.2 mm
• Degree of protection
  IP44 (plugged in)
• Number of phases
  3
• Rated voltage for signal contacts
  30 V AC
• Insertion force
  < 100 N (Optimized)
Affixed logo
“PHOENIX CONTACT” logo
Note on the connection method
Crimp connection, cannot be disconnected
Cable structure
4 x 0.5 mm²
Ambient temperature (operation)
-30 °C ... 50 °C
Rated voltage for power contacts
480 V AC
Rated current for signal contacts
2 A
Max. wall thickness
max. 50 mm (Rear panel mounting, normative maximum specification for infrastructure plug)
Material
Plastic
Possible power supply range at the motor
9 V ... 16 V
Cable length
0.5 m
ECLASS 11.0
27144706
Application
For charging electric vehicles (EV) with alternating current (AC)
Charging standard
Type 2
Type of conductor
Single wires
Type of charging current
AC 3-phase
Number of signal contacts
2 (CP, PP)
Withdrawal force
< 100 N (Optimized)
Screw connection of a protective cover
Only rear mounting possible
Customer variations
On request
Operating voltage
12 V (Typical power supply at the motor)
Pause time after entry or exit path
3 s
Lock recognition
available
Mechanical emergency release
available
ECLASS 9.0
27144706
Possible mounting positions
Rear panel mounting
Mounting hole diameter
7.00 mm (ø)
Number of positions of theconnectors
4
Reverse current of the motor
max. 1 A
Recommended adaptation time
600 ms
ECLASS 10.0.1
27144706
Restrictions to mounting position
Only 0 to 90 degree frontal inclination possible, see figure
Housing color
black
Locking type
Locking in the inserted state with a locking mechanism
Maximum voltage for locking detection
30 V
Max. dwell time with reverse current
1000 ms
REACh SVHC
Lead 7439-92-1
ETIM 7.0
EC002898
Mounting position of the locking actuator
Top center
Design line
Generation 1
Material surface of contacts
Ag
Typical motor current for locking
0.2 A
Service life insertion cycles
> 10000 load cycles
China RoHS
Environmentally Friendly Use Period = 10;
ETIM 6.0
EC002898