1077088 Phoenix Contact Terminal Blocks

Product Details

• Number of connections
  2
• Rated surge voltage
  8 kV
• Degree of pollution
  3
• Open side panel
  Yes
• Result of power-frequency withstand voltage test
  Test passed
• Result of flexion and pull-out test
  Test passed
• Result of tight fit on support
  Test passed
• Nominal cross section
  10 mm²
• Overvoltage category
  III
• Nominal current IN
  57 A
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Power frequency withstand voltage setpoint
  2.2 kV
• Tensile test result
  Test passed
• Result of voltage-drop test
  Test passed
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2008-03
• Acceleration
  5g
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2008-03
• Number of levels
  1
• Flammability rating according to UL 94
  V0
Maximum load current
70 A (with a 16 mm² conductor cross section, rigid)
Result of surge voltage test
Test passed
Bending test rotation speed
10 rpm
Result of temperature-rise test
Test passed
Short-time current
1.92 kA
Test spectrum
Service life test category 1, class B, body mounted
Shock duration
30 ms
Height
49.5 mm
Conductor cross section AWG min.
20
Conductor cross section flexible min.
0.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
1.5 mm²
Internal cylindrical gage
A6
ECLASS 11.0
27141120
ECLASS 6.0
27141100
ECLASS 9.0
27141120
ETIM 2.0
EC000897
UNSPSC 18.0
39121410
UNSPSC 19.0
39121410
Potentials
1
Insulating material
PA
Insulating material group
I
Finger protection
guaranteed
Bending test turns
135
Tight fit on carrier
NS 35
Ageing test for screwless modular terminal block temperature cycles
192
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Number of shocks per direction
3
Width
10.2 mm
Height NS 35/7,5
50.5 mm
Stripping length
18 mm
Conductor cross section AWG max.
6
Conductor cross section flexible, with ferrule without plastic sleeve max.
10 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
10 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 4.0
27141121
ETIM 3.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 20.0
39121410
UNSPSC 11
39121410
Color
black/yellow
Area of application
Railway industry
Maximum power dissipation for nominal condition
1.82 W
Nominal voltage UN
1000 V
Back of the hand protection
guaranteed
Bending test conductor cross section/weight
0.5 mm² / 0.3 kg
Setpoint
5 N
Short circuit stability result
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Oscillation, broadband noise test result
Test passed
ASD level
1.857 (m/s2)2/Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
End cover width
2.2 mm
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section flexible max.
16 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
2.5 mm²
Connection cross sections directly pluggable
1 mm² 16 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 10.0.1
27141120
ECLASS 5.1
27141100
ETIM 6.0
EC000897
UNSPSC 13.2
39121410
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Conductor cross section short circuit testing
16 mm²
Result of thermal test
Test passed
Result of aging test
Test passed
Shock test result
Test passed
Test duration per axis
5 h
Shock form
Half-sine
Connection
1 level
Conductor cross section solid min.
1 mm²
Conductor cross section solid max.
16 mm²
Max. AWG conductor cross section, flexible
8
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
4 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 5.0
27141120
ECLASS 7.0
27141120
ETIM 7.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 21.0
39121410
Length
67.7 mm
Height NS 35/15
58 mm
Connection method
Push-in connection
Min. AWG conductor cross section, flexible
20
Conductor cross section flexible, with ferrule without plastic sleeve min.
4 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.1
27141121
ETIM 4.0
EC000897
UNSPSC 7.0901
39121410