1082029 Phoenix Contact Electrical Safety Devices

Product Details

• Height
  117.4 mm
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Maximum altitude
  ≤ 2000 m (Above sea level)
• Rated control circuit supply voltage US
  24 V DC -20 % / +25 % (provide external protection)
• Input voltage range "1" signal
  19.2 V DC ... 30 V DC
• Current consumption
  2.5 mA (Typically with US at S34)
• Output name
  Enabling current paths
• Contact type
  3 enabling current paths
• Contact material
  AgSnO2
• Switching capacity according to IEC 60947-5-1
  5 A (24 V (DC13))
• Maximum inrush current
  1 A (Δt = 5 ms at Us)
• Short-circuit protection
  Yes
• Nominal operating mode
  100% operating factor
• Mounting type
  DIN rail mounting
• Housing color
  yellow
• pluggable
  Yes
• Conductor cross section solid
  0.2 mm² ... 1.5 mm²
• Safety Integrity Level (SIL)
  3
• Standards/regulations
  EN 60947-5-1
• REACh SVHC
  Lead 7439-92-1
Depth
114.5 mm
Ambient temperature (operation)
-40 °C ... 60 °C (observe derating)
Rated control supply current IS
typ. 75 mA
Filter time
max. 3 ms (Test pulse width of low test pulses)
Description of the input
non-safety-related
Input voltage range "0" signal
0 V ... 5 V (S10, S12)
Input current range "0" signal
0 mA ... 2 mA (S10, S12)
Output description
PNP
Switching capacity
min. 50 mW
Mechanical service life
10x 106 cycles
Typical pickup time at US
< 100 ms (when controlled via A1)
Restart time
< 1 s (Boot time)
Assembly instructions
See derating curve
Conductor cross section flexible
0.2 mm² ... 1.5 mm²
Stripping length
8 mm
Rated insulation voltage
250 V AC
Vibration (operation)
10 Hz ... 150 Hz, 2g
China RoHS
Environmentally Friendly Use Period = 50 years
Width
22.5 mm
Max. permissible relative humidity (operation)
75 % (on average, 85% infrequently, non-condensing)
Designation
Air clearances and creepage distances between the power circuits
Inrush current
min. 10 mA AC/DC
Number of inputs
2
Concurrence
∞
Number of outputs
1
Limiting continuous current
6 A
Output fuse
6 A gL/gG
Typical release time at US
< 20 ms (on demand via the sensor circuit)
Relay type
Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
Degree of protection
IP20
Min. degree of protection of inst. location
IP54
Conductor cross-section AWG
24 ... 16
Stop category
0
Category
4
Rated surge voltage/insulation
Basic insulation 4 kV between all current paths
Overvoltage category
II
ECLASS 9.0
27371819
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Max. permissible humidity (storage/transport)
75 % (on average, 85% infrequently, non-condensing)
Power consumption at US
typ. 1.8 W
Protective circuit
Serial protection against polarity reversal
Input name
Start circuit
Max. permissible overall conductor resistance
150 Ω
Protective circuit/component
33 V suppressor diode
Switching voltage
min. 5 V AC/DC
Switching frequency
0.5 Hz (ohmic)
Current
max. 100 mA
Recovery time
500 ms (following demand of the safety function)
Mounting position
vertical or horizontal
Operating voltage display
1 x green LED
Conductor cross-section flexible with ferrule without plastic sleeve
0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
Safety Integrity Level Claim Limit (SIL CL)
3
Degree of pollution
2
ECLASS 10.0.1
27371819
Sq. Total current
72 A2 (observe derating)
Voltage
approx. 23 V DC (Us - 1 V)
Typical response time at US
< 100 ms (automatic start)
Net weight
180.24 g
Housing material
PBT
Status display
2 x green LEDs
Connection method
Push-in connection
Conductor cross-section flexible with ferrule and plastic sleeve
0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
Performance level (PL)
e (5 A DC13; 8760 switching cycles/year or 5 A AC15; 2190 switching cycles/year)
Shock
15g for Δt = 11 ms (continuous shock: 10g for Δt = 16 ms)
Conformance
CE-compliant
ECLASS 11.0
27371819