1082486 Phoenix Contact Terminal Blocks

Product Details

• Number of connections
  6
• Flammability rating according to UL 94
  V0
• Potentials
  1
• Insulating material
  PA
• Overvoltage category
  III
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Surge voltage test setpoint
  9.8 kV
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Bending test conductor cross section/weight
  0.5 mm² / 0.3 kg
• Tractive force setpoint
  100 N
• Result of aging test
  Test passed
• Test spectrum
  Service life test category 2, bogie-mounted
• Shock test result
  Test passed
• Shock duration
  18 ms
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  28 MJ/kg
• Connection in acc. with standard
  IEC 60947-7-1
• Conductor cross section flexible, with ferrule without plastic sleeve max.
  10 mm²
• Ambient temperature (assembly)
  -5 °C ... 70 °C
• Note
  Notes on operation The blocks can be bridged with one another via the conductor shaft. For corresponding plug-in bridges, see accessories
• Nominal cross section
  10 mm²
Maximum total current
90 A (The maximum load current of the individual terminal point must not be exceeded.)
Maximum load current
76 A (with a 16 mm² conductor cross section, rigid)
Result of power-frequency withstand voltage test
Test passed
Tensile test result
Test passed
Result of voltage-drop test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Number of levels
1
Rated surge voltage
8 kV
Nominal voltage UN
800 V
Result of surge voltage test
Test passed
Bending test rotation speed
10 rpm
Conductor cross section tensile test
16 mm²
Tight fit on carrier
NS 35
Result of thermal test
Test passed
Acceleration
30g
Test duration per axis
5 h
Number of shocks per direction
3
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Conductor cross section solid min.
1 mm²
Color
black
Degree of pollution
3
Back of the hand protection
guaranteed
Bending test turns
135
Result of flexion and pull-out test
Test passed
Result of temperature-rise test
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Test frequency
f1 = 5 Hz to f2 = 250 Hz
ECLASS 11.0
27141120
Insulating material group
I
Open side panel
No
Finger protection
guaranteed
Power frequency withstand voltage setpoint
2 kV
Result of tight fit on support
Test passed
Short circuit stability result
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
ASD level
6.12 (m/s2)2/Hz
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Test directions
X-, Y- and Z-axis (pos. and neg.)
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Conductor cross section AWG min.
20
Conductor cross section flexible max.
10 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
1 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Permissible humidity (storage/transport)
30 % ... 70 %
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Conductor cross section flexible min.
0.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (actuation)
-5 °C ... 70 °C
Oscillation, broadband noise test result
Test passed
Shock form
Half-sine
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Conductor cross section AWG max.
6
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Stripping length
12 mm ... 14 mm
Conductor cross section solid max.
16 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
1 mm²
Connection cross sections directly pluggable
1 mm² 16 mm²
ECLASS 10.0.1
27141120
ECLASS 9.0
27141120