1087077 Phoenix Contact Programmable Logic Controllers

Product Details

• Height
  126.1 mm
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Air pressure (operation)
  70 kPa ... 106 kPa (up to 2000 m above sea level)
• Conductor cross section AWG min.
  24
• Mounting type
  DIN rail
• Width
  53.6 mm
• Air pressure (storage/transport)
  70 kPa ... 106 kPa (up to 2000 m above sea level)
• Connection method
  Push-in connection
• Conductor cross section solid min.
  0.2 mm²
• Conductor cross section AWG max.
  16
• Supply voltage
  5 V DC (via bus base module)
• Connection technology
  2-conductor
• Test section
  5 V supply of the local bus (UBus) / functional ground 500 V AC 62 Hz 1 min.
• IECEx
  IECEx UL 20.0044XEx ec [ia Ga] IIC T4 Gc[Ex ia Da] IIIC
• ECLASS 11.0
  27242604
• Number of outputs
  4
• Note on dimensions
  The depth is valid when a TH 35-7,5 DIN rail is used (according to EN 60715).
• Degree of protection
  IP20
• Note on the connection method
  Please observe the information provided on conductor cross sections in the “Axioline F: system and installation” user manual.
• Conductor cross section flexible max.
  1.5 mm²
Net weight
0 g
Current consumption
max. 135 mA
Output voltage
24 V
Interference emission
Noise emission test as per EN 61000-6-4 Class A
UL, USA/Canada
Ind. Cont. Eq. (E238705) also ListedInd. Cont. Eq. for haz. loc. E196811Install in: Class I, Div. 2, Groups A, B, C, D T4Intrinsically safe outputs for: Class I, Groups A, B, C, D; Class II, Groups E, F, G; Class III; [Ex ia] Haz locClass I, Zone 2, AEx e
Utilization restriction
Use in potentially explosive areas is not permitted in China.
Ambient temperature (operation)
-40 °C ... 70 °C (Standard)
Permissible humidity (operation)
5 % ... 95 % (non-condensing)
Designation
Supply of the Axioline P local bus UBus
Conductor cross section flexible min.
0.2 mm²
Color
traffic grey A RAL 7042
Note on weight specifications
with connectors and bus base module
Supply voltage range
19.2 V DC ... 30 V DC (via bus base module (UL) at AXL P BK...)
Protective circuit
Polarity reversal protection of the outputs
Immunity to burst
Noise immunity test in accordance with EN 61000-6-2 Fast transients (burst) EN 61000-4-4/IEC 61000-4-4 Criterion B, 2 kV
Group
A, B / IIC
Overvoltage category
II
ECLASS 9.0
27242604
Depth
77.14 mm
Permissible humidity (storage/transport)
5 % ... 95 % (non-condensing)
Conductor cross section solid max.
1.5 mm²
Stripping length
8 mm
Degree of pollution
2
Output name
Digital outputs
Immunity to EF
Noise immunity test in accordance with EN 61000-6-2 Electromagnetic fields EN 61000-4-3/IEC 61000-4-3 Criterion A, Field intensity: 10 V/m
ATEX
DEMKO 20 ATEX 2370XII 3(1)G Ex ec [ia Ga] IIC T4 GcII (1)D [Ex ia Da] IIIC
Protection class
III (IEC 61140, EN 61140, VDE 0140-1)
Maximum altitude
2000 m
Transmission speed
100 Mbps
Nominal output voltage
24 V DC
Immunity to conducted interference
Noise immunity test in accordance with EN 61000-6-2 Conducted interference EN 61000-4-6/IEC 61000-4-6 Criterion A, Test voltage 10 V
Immunity to surge
Noise immunity test in accordance with EN 61000-6-2 Transient overvoltage (surge) EN 61000-4-5/IEC 61000-4-5 Criterion A, supply lines DC: ±0.5 kV/±0.5 kV (symmetrical/asymmetrical), ±1 kV to shielded I/O cables
ECLASS 10.0.1
27242604
China RoHS
Environmentally Friendly Use Period = 25;