1087569 Phoenix Contact Electrical Safety Devices
Part#:1087569
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Get a quick Quote!
Safety relay module with IO-Link for emergency stop, safety doors, and light grids, to SILCL 3, Cat. 4, PL e, 2 sensor circuits, automatic or manual, monitored start, 2 safe digital outputs, 1 signal output, US = 24 V DC, pluggable Push-in terminal block
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Electrical Safety Devices that you can order at marketplace.quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 1087569 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Depth 114.5 mm
- Power consumption at US typ. 1.73 W
- Current consumption < 7 mA (Typically with US at S34)
- Number of inputs 1
- Ambient temperature (operation) -40 °C ... 60 °C (observe derating)
- Maximum altitude ≤ 2000 m (Above sea level)
- Filter time max. 1.5 ms (Test pulse width of low test pulses)
- Input name C/Q
- Input current range "0" signal 0 mA ... 2 mA
- Cycle Time 5 ms
- Connection method Push-in connection
- Width 17.5 mm
- Max. permissible relative humidity (operation) 75 % (on average, 85% infrequently, non-condensing)
- Designation Air clearances and creepage distances between the power circuits
- Inrush current max. 4.8 A (Δt = 10 ms)
- Type of protection Freewheeling circuit for inductive loads
- Concurrence ∞
- Amount of process data max. 31 Byte (Input data)
- Output description Safety-related digital outputs
- Output voltage ≥ 23 V DC (Us - 1 V)
- Max. inductive load max. 1 H
- Ohmic load min. 12 Ω
- Limitation of the voltage induced on circuit interruption max. 50 V
- Restart time < 1 s (Boot time)
- Mounting type DIN rail mounting
- Min. degree of protection of inst. location IP54
- Conductor cross-section flexible with ferrule without plastic sleeve 0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
- Stripping length 8 mm
- Rated insulation voltage 63 V
- Degree of pollution 2
- ECLASS 9.0 27371819
- Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
- Ambient temperature (storage/transport) -40 °C ... 85 °C
- Rated control circuit supply voltage US 24 V DC -20 % / +25 % (provide external protection)
- Protective circuit Parallel protection against polarity reversal Suppressor diode Provide external fuse protection, see safety notes. Fuse type: 5 AT
- Description of the input IO-Link switching and communication cable
- Max. permissible overall conductor resistance 150 Ω
- Process data update 5 ms
- Number of outputs 2
- Output voltage when switched off < 5 V DC (in the safe state)
- Max. capacitive load max. 10 µF (2.4 A load)
- Switching frequency 1 Hz (Resistive, inductive, capacitive)
- Discharging circuit No
- Recovery time 250 ms (following demand of the safety function)
- Assembly instructions See derating curve
- Housing color yellow
- Status display 5x LED green
- Category 4
- Overvoltage category II
- Conformance CE-compliant
- Height 116.6 mm
- Max. permissible humidity (storage/transport) 75 % (on average, 85% infrequently, non-condensing)
- Rated control supply current IS typ. 72 mA
- Nominal voltage for I/O supply 24 V DC -20 % / +25 % (is provided via the IO-Link interface of the IO-Link master.)
- Protective circuit/component Suppressor diode
- Input voltage range "0" signal 0 V DC ... 5 V DC
- Input voltage range 0 V DC ... 30 V DC
- Transmission speed 230 kbps (COM3)
- Number of ports 1
- Port type Class A
- Output name 14, 24
- Short-circuit protection Yes
- Voltage approx. 22 V DC
- Net weight 126.06 g
- Operating voltage display 1 x green, yellow, red LED
- pluggable Yes
- Conductor cross-section AWG 24 ... 16
- Stop category 0
- Vibration (operation) 10 Hz ... 150 Hz, 5g
- ECLASS 11.0 27371819
- Input voltage range "1" signal 19.2 V DC ... 30 V DC
- Specification Version 1.1
- Typical response time at US < 200 ms (automatic start)
- Mounting position vertical or horizontal
- Degree of protection IP20
- Response time < 10 ms
- Conductor cross section solid 0.2 mm² ... 1.5 mm²
- Conductor cross-section flexible with ferrule and plastic sleeve 0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
- Performance level (PL) e
- Rated surge voltage/insulation Safe isolation, 0.5 kw between logic and IO-Link
- ECLASS 10.0.1 27371819
- Connection technology 3-conductor
- Output current max. 2.4 A
- Leakage current max. 1 mA (in the safe state)
- Min. load current 2 mA
- Typical pickup time at US < 200 ms (when controlled via A1)
- Nominal operating mode 100% operating factor
- Housing material PBT
- Conductor cross section flexible 0.2 mm² ... 1.5 mm²
- Safety Integrity Level (SIL) 3
- Safety Integrity Level Claim Limit (SIL CL) 3
- Standards/regulations EN 60947-5-1
- Shock 30g
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨