1087698 Phoenix Contact Terminal Blocks

Product Details

• Number of levels
  1
• Degree of pollution
  3
• Maximum load current
  20 A (with 4 mm² conductor cross section, rigid)
• Short-time current
  0.3 kA
• Color
  gray
• Overvoltage category
  III
• Potentials
  1
• Rated surge voltage
  4 kV
• Open side panel
  Yes
• Note
  Only valid for the terminal block
• Bending test rotation speed
  10 rpm
• Result of tight fit on support
  Test passed
• Tight fit on carrier
  NS 35
• Insulating material
  PA
• Insulating material group
  I
• Back of the hand protection
  guaranteed
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Power frequency withstand voltage setpoint
  1.89 kV
• Bending test turns
  135
• Tensile test result
  Test passed
Short circuit stability result
Test passed
Result of thermal test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Test duration per axis
5 h
Shock form
Half-sine
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Width
5.2 mm
Conductor cross section solid min.
0.34 mm²
Conductor cross section flexible max.
4 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 10.0.1
27141126
Flammability rating according to UL 94
V0
Nominal voltage UN
400 V
Note regarding shock protection
Only valid for the terminal block
Result of power-frequency withstand voltage test
Test passed
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Result of temperature-rise test
Test passed
Conductor cross section short circuit testing
2.5 mm²
Proof of thermal characteristics (needle flame) effective duration
30 s
Result of aging test
Test passed
Acceleration
5g
Number of shocks per direction
3
Static insulating material application in cold
-60 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Length
98.6 mm
Connection
1 level
Conductor cross section flexible min.
0.14 mm²
Max. AWG conductor cross section, flexible
12
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 125°C)
Permissible humidity (storage/transport)
30 % ... 70 %
Nominal current IN
20 A
Finger protection
guaranteed
Surge voltage test setpoint
4.8 kV
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Tractive force setpoint
60 N
Result of voltage-drop test
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
ASD level
0.964 (m/s2)2/Hz
Shock test result
Test passed
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
End cover width
2.2 mm
Height NS 35/15
115 mm
Conductor cross section solid max.
4 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Connection cross sections directly pluggable
0.34 mm² 4 mm²
ECLASS 11.0
27141126
Result of surge voltage test
Test passed
Result of flexion and pull-out test
Test passed
Conductor cross section tensile test
4 mm²
Requirements, voltage drop
U1 ≤ 3.2 mV; U2 ≤ 1.5 x U1
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Oscillation, broadband noise test result
Test passed
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Stripping length
8 mm ... 10 mm
Conductor cross section AWG max.
14
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 9.0
27141126
Test spectrum
Service life test category 1, class B, body mounted
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock duration
30 ms
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Height NS 35/7,5
107.5 mm
Connection method
Push-in connection
Conductor cross section AWG min.
26
Min. AWG conductor cross section, flexible
26
Ambient temperature (assembly)
-5 °C ... 70 °C