1091673 Phoenix Contact Terminal Blocks

Product Details

• Number of levels
  1
• Color
  blue/white
• Rated surge voltage
  6 kV
• Nominal voltage UN
  450 V
• Result of thermal test
  Test passed
• ASD level
  6.12 (m/s2)2/Hz
• Shock test result
  Test passed
• Number of shocks per direction
  3
• Static insulating material application in cold
  -60 °C
• Fire protection for rail vehicles (DIN EN 45545-2) R23
  HL 1 - HL 3
• Width
  56.5 mm
• Conductor cross section solid min.
  1 mm²
• Min. AWG conductor cross section, flexible
  20
• Conductor cross section flexible, with ferrule without plastic sleeve min.
  0.5 mm²
• Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
  1.5 mm²
• Ambient temperature (assembly)
  -5 °C ... 70 °C
• Ambient temperature (actuation)
  -5 °C ... 70 °C
• ECLASS 5.1
  27141120
• ETIM 4.0
  EC000897
• UNSPSC 12.01
  39121410
Note
Notes on operation The blocks can be bridged with one another via the conductor shaft. For corresponding plug-in bridges, see accessories
Nominal cross section feed-in
6 mm²
Degree of pollution
3
Maximum total current
57 A (with 10 mm² conductor cross section)
Open side panel
No
Proof of thermal characteristics (needle flame) effective duration
30 s
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Connection in acc. with standard
IEC 60998-2-2
Conductor cross section flexible min.
0.5 mm²
Connection
Feed-in stage
ECLASS 5.0
27141120
ETIM 3.0
EC000897
UNSPSC 11
39121410
Nominal cross section
2.5 mm²
Flammability rating according to UL 94
V0
Maximum load current
57 A (with 10 mm² conductor cross section)
Finger protection
guaranteed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Shock duration
18 ms
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Height
21.7 mm
Stripping length
10 mm ... 12 mm
Conductor cross section AWG max.
8
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
Connection cross sections directly pluggable
1 mm² 10 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
Value
1 mm²
ECLASS 11.0
27141120
Potentials
1
Insulating material group
I
Nominal current IN
41 A (with 6 mm² conductor cross section)
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Acceleration
30g
Shock form
Half-sine
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Connection method
Push-in connection
Conductor cross section AWG min.
20
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
Number of connections
19
Maximum power dissipation for nominal condition
1.31 W (the value is based on one connection block and is multiplied according to the pin assignment)
Oscillation, broadband noise test result
Test passed
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
ECLASS 4.1
27141121
ECLASS 6.0
27141100
UNSPSC 7.0901
39121410
Conductor cross section solid max.
10 mm²
Internal cylindrical gage
A3
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 10.0.1
27141120
ECLASS 4.0
27141121
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Conductor cross section flexible max.
10 mm²
ETIM 6.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 19.0
39121410
Insulating material
PA
Overvoltage category
III
Test directions
X-, Y- and Z-axis (pos. and neg.)
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
ECLASS 9.0
27141120
ETIM 7.0
EC000897
UNSPSC 13.2
39121410
UNSPSC 20.0
39121410
Back of the hand protection
guaranteed
Test spectrum
Service life test category 2, bogie-mounted
Test duration per axis
5 h
Surface flammability NFPA 130 (ASTM E 162)
passed
Length
28.6 mm
Max. AWG conductor cross section, flexible
10
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 7.0
27141120
UNSPSC 18.0
39121410
UNSPSC 21.0
39121410