1105522 Phoenix Contact Electrical Safety Devices

Product Details

• Screw thread
  M3
• Depth
  113.6 mm
• Designation
  Air clearances and creepage distances between the power circuits
• Rated control circuit supply voltage US
  24 V DC -20 % / +20 % (provide external protection, typically 8 A)
• Height
  112.58 mm
• Ambient temperature (storage/transport)
  -20 °C ... 85 °C
• Current consumption
  typ. 10 mA (typically with US)
• Protective circuit
  Serial protection against polarity reversal
• Max. permissible overall conductor resistance
  1.2 kΩ (Input and reset circuit at US)
• Cable length
  max. 100 m (per output)
• Limiting continuous current
  100 mA (per channel)
• Switching frequency
  max. 1/4 x tCycle [Hz]
• Voltage
  24 V DC (via A1)
• Nominal voltage range
  18.2 V DC ... 27.8 V DC (US - 1 V)
• Assembly instructions
  Observe derating
• Housing color
  yellow
• pluggable
  Yes
• Width
  22.61 mm
• Max. permissible humidity (storage/transport)
  95 % (non-condensing)
• Description of the input
  IEC 61131-2 type 3
Input voltage range "0" signal
0 V DC ... 5 V DC
Output name
O1A, O1B, O2A, O2B
Nominal output voltage range
18 V DC ... 27.6 V DC (US - 1.2 V)
Leakage current
max. 100 µA
Short-circuit protection
Yes (self-limitation at 1.1 A)
Discharging circuit
Yes, internal
Restart time
min. 5 s (Boot time)
Net weight
159 g
Protection class
III (EN 50178)
Housing material
Polyamide PA non-reinforced
Conductor cross section solid
0.2 mm² ... 2.5 mm²
Safety Integrity Level Claim Limit (SIL CL)
3 (2-channel wiring)
Rated surge voltage/insulation
Basic insulation 4 kV between 24 V power supply and I/Os to the housing
Conformance
CE-compliant
ECLASS 9.0
27371819
Max. permissible relative humidity (operation)
95 % (non-condensing)
Rated control supply current IS
typ. 40 mA (Outputs inactive)
Power consumption at US
typ. 0.96 W (Outputs inactive)
Input name
Reset inputs
Protective circuit/component
Suppressor diode
Number of outputs
4
Nominal output voltage
24 V DC (Supply via A1)
Max. inductive load
max. 2.4 mH
Test pulses
≤ 220 µs (Test pulse duration)
Response time
see user manual
Mounting position
vertical or horizontal
Mounting type
DIN rail mounting
Indication
2 x LED (red)
Conductor cross section flexible
0.2 mm² ... 2.5 mm²
Stop category
0
Rated insulation voltage
250 V AC
Shock
10g for Δt = 16 ms (continuous shock, 1000 shocks in each space direction)
ECLASS 10.0.1
27371819
Ambient temperature (operation)
-10 °C ... 55 °C (observe derating)
Maximum altitude
≤ 2000 m (Above sea level)
Filter time
250 ms ±2 ms (Test pulse rate > 500 ms)
Number of inputs
2
Input current range "0" signal
< 1 mA
Output voltage when switched off
max. 0.1 V
Ohmic load
min. 50 Ω (Observe limiting continuous current)
Maximum inrush current
1.1 A (Δt = 3 s  at Us)
Nominal operating mode
100% operating factor
Degree of protection
IP20
Status display
1 x LED (green), 2 x LED (orange)
Connection method
Screw connection
Torque
0.5 Nm ... 0.6 Nm
Performance level (PL)
e (2-channel wiring)
Overvoltage category
II
ECLASS 11.0
27371819
Inrush current
max. 750 mA (Δt  1 s)
Input voltage range "1" signal
11 V DC ... 28.8 V DC
Output description
PNP, IEC 61131-2 type 0.5
Max. capacitive load
max. 470 nF
Error detection time at 1-channel structure
< 3.5 s (OFF state)
Output voltage range
18.2 V DC ... 27.8 V DC (US - 1 V)
Cycle time
see user manual
Min. degree of protection of inst. location
IP54
Operating voltage display
1 x green LED
Stripping length
7 mm
Conductor cross-section AWG
24 ... 12
Standards/regulations
EN 50178
Vibration (operation)
10 Hz ... 150 Hz, 2g
Safety Integrity Level (SIL)
2
Degree of pollution
2
China RoHS
Environmentally friendly use period: unlimited = EFUP-e