1166809 Phoenix Contact Terminal Blocks

Product Details

• Tractive force setpoint
  80 N
• Nominal cross section
  6 mm²
• Insulating material group
  I
• Nominal current IN
  30 A (with 6 mm² conductor cross section)
• Result of surge voltage test
  Test passed
• Bending test conductor cross section/weight
  0.5 mm² / 0.3 kg
• Potentials
  1
• Degree of pollution
  3
• Nominal voltage UN
  1000 V
• UNSPSC 6.01
  30211811
• UNSPSC 12.01
  39121410
• End cover width
  2.2 mm
• Conductor cross section flexible, with ferrule without plastic sleeve max.
  6 mm²
• Connection cross sections directly pluggable
  0.75 mm² 6 mm²
• Ambient temperature (actuation)
  -5 °C ... 70 °C
• ECLASS 5.1
  27141100
• ECLASS 6.0
  27141100
• ETIM 3.0
  EC000902
• UNSPSC 7.0901
  39121410
• UNSPSC 19.0
  39121410
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height NS 35/15
57.1 mm
Conductor cross section solid min.
0.75 mm²
Stripping length
10 mm ... 12 mm
Conductor cross section AWG min.
20
Max. AWG conductor cross section, flexible
10
Conductor cross section flexible, with ferrule with plastic sleeve min.
1 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 11.0
27141126
ECLASS 7.0
27141126
ECLASS 5.0
27141100
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Width
8.2 mm
Height NS 35/7,5
49.6 mm
Connection
1 level
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section flexible min.
0.5 mm²
Conductor cross section flexible max.
6 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
Internal cylindrical gage
A4
Operating temperature
-60 °C ... 85 °C
ECLASS 4.0
27141100
ECLASS 4.1
27141100
ETIM 2.0
EC000902
ECLASS 9.0
27141126
UNSPSC 13.2
39121410
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Connection method
Push-in connection
Length
100.8 mm
Conductor cross section solid max.
6 mm²
Min. AWG conductor cross section, flexible
20
Conductor cross section AWG max.
10
Conductor cross section flexible, with ferrule without plastic sleeve min.
1.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 55 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 10.0.1
27141126
ETIM 4.0
EC000902
UNSPSC 11
39121410
ETIM 7.0
EC000902
UNSPSC 21.0
39121410
Finger protection
guaranteed
Back of the hand protection
guaranteed
Shock test result
Test passed
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Number of connections
2
Overvoltage category
III
Maximum load current
30 A (with 6 mm² conductor cross section)
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of tight fit on support
Test passed
Short circuit stability result
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Test spectrum
Service life test category 2, bogie-mounted
Color
gray
Rated surge voltage
8 kV
Bending test turns
135
Conductor cross section tensile test
6 mm²
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Result of aging test
Test passed
Test duration per axis
5 h
Number of shocks per direction
3
Number of levels
1
Flammability rating according to UL 94
V0
Maximum power dissipation for nominal condition
1.31 W
Open side panel
Yes
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test rotation speed
10 rpm
Power frequency withstand voltage setpoint
2.2 kV
Requirements, voltage drop
U1 ≤ 3.2 mV; U2 ≤ 1.5 x U1
Short-time current
1.25 kA
Insulating material
PA
Surge voltage test setpoint
9.8 kV
Result of power-frequency withstand voltage test
Test passed
Result of temperature-rise test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Oscillation, broadband noise test result
Test passed
Acceleration
30g
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock form
Half-sine
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Result of flexion and pull-out test
Test passed
Result of voltage-drop test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Surface flammability NFPA 130 (ASTM E 162)
passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Shock duration
18 ms
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
UNSPSC 20.0
39121410
ASD level
6.12 (m/s2)2/Hz
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
UNSPSC 18.0
39121410
Conductor cross section short circuit testing
4 mm²
Result of thermal test
Test passed
Static insulating material application in cold
-60 °C
Tensile test result
Test passed
ETIM 6.0
EC000902