1182185 Phoenix Contact Programmable Logic Controllers

Product Details

• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Permissible humidity (operation)
  5 % ... 95 % (non-condensing)
• Degree of protection
  IP20
• Number
  1
• Width
  14.9 mm
• Ambient temperature (operation)
  -25 °C ... 60 °C
• Color
  traffic grey A RAL 7042
• Transmission speed
  See system in which you use the Smart Element.
• Supply voltage
  24 V DC (using card edge connectors)
• Input name
  Digital inputs
• Caption
  Dimensions
• Height
  62.2 mm
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Air pressure (storage/transport)
  70 kPa ... 106 kPa (up to 3000 m above sea level)
• Degree of pollution
  2 (EN 60664-1)
• Connection method
  Push-in connection
• Start time until ready to operate
  < 500 ms (after switching on the supply voltage (object 003Dhex: WakeUpTime))
• Supply voltage range
  19.2 V DC ... 30 V DC (including all tolerances, including ripple)
• Protection
  See the system in which the Smart Element is used.
• Cable length
  < 30 m (Shielded cable)
Current carrying capacity
max. 500 mA
Permissible humidity (storage/transport)
5 % ... 95 % (non-condensing)
Mounting type
Smart Element slot
Depth
62 mm
Air pressure (operation)
70 kPa ... 106 kPa (up to 3000 m above sea level)
Net weight
35 g
Current consumption
min. 11 mA (without connected peripherals)
Encoder signals
Asymmetrical encoder
Input frequency
max. 300 kHz
Mounting position
See the system in which the Smart Element is used.
Nominal output voltage
24 V DC
Encoder types that can be connected
1 (A, B, Z)
Input voltage range "1" signal
11 V DC ... 30 V DC
Additional text
using card edge connectors
Power consumption
min. 264 mW
Protective circuit
Transient protection Suppressor diode
Nominal input voltage UIN
24 V DC
Immunity to burst
Noise immunity test in accordance with EN 61000-6-2 Fast transients (burst) EN 61000-4-4/IEC 61000-4-4 Criterion B, 2 kV
Mechanical tests
Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g
Designation
Asymmetrical incremental encoder
Voltage range
19.2 V DC ... 30 V DC
Number of 24 V encoder supplies
1 (+24 V)
Description of the input
EN 61131-2, type 3
Nominal input current at UIN
3 mA
Immunity to surge
Noise immunity test in accordance with EN 61000-6-2 Transient overvoltage (surge) EN 61000-4-5/IEC 61000-4-5 Criterion B, shielded I/O cables: ±1 kV asymmetrical
Immunity to EF
Noise immunity test in accordance with EN 61000-6-2 Electromagnetic fields EN 61000-4-3/IEC 61000-4-3 Criterion A, Field intensity: 10 V/m
Number of 5 V encoder supplies
1 (+5 V)
Test section
Communications supply / 24 V supply (I/O) 500 V AC 50 Hz 1 min.
Interference emission
Noise emission test as per EN 61000-6-4 Class A
Overvoltage category
II (IEC 60664-1)
ECLASS 11.0
27242604
Input voltage range "0" signal
-3 V DC ... 5 V DC
Immunity to conducted interference
Noise immunity test in accordance with EN 61000-6-2 Conducted interference EN 61000-4-6/IEC 61000-4-6 Criterion A, Test voltage 10 V
ECLASS 10.0.1
27242604
China RoHS
Environmentally Friendly Use Period = 50 years
Connection technology
1-conductor
Protection class
III (IEC 61140, EN 61140, VDE 0140-1)
ECLASS 9.0
27242604
Type of protection
Short-circuit protection
Number of inputs
2 (DI Ref, DI L)
Immunity to ESD
Noise immunity test in accordance with EN 61000-6-2 Electrostatic discharge (ESD) EN 61000-4-2/IEC 61000-4-2 Criterion B, 6 kV contact discharge, 8 kV air discharge